Which anti-skid bracelets are better to buy
Content
Installing anti-skid bracelets is a convenient way to overcome winter obstacles. Such elements can help the driver out when the car is slipping due to the fact that the tire tread cannot catch on the road and the wheels spin in vain.
In order to drive in winter on bad roads and off-road, to overcome local obstacles in the form of ice, mounds of hard snow, you need to choose anti-skid bracelets (they are ineffective when driving on virgin soil or sand). The elements are quickly put on the wheels and instantly improve the vehicle's patency. They are especially needed by drivers in winter, when difficult sections appear on the roads, and it is cold outside and it is dangerous to get stuck on the road.
What is the difference between bracelets and chains
Before choosing anti-skid bracelets, you need to understand how they differ from chains. The first ones are easily attached to the tires, anyone can cope with their installation. Hanging chains is difficult. This is an outdated way to increase the patency of a car. The structures were made in artisanal conditions in the last century and were a grid of several segments of the chain, fastened to each other by various weaving. As a result, this element acquired a "ladder" or "rhombus" pattern.
Weaving slip chains - "ladder" and "rhombus"
The chains are attached to the wheel as a whole, while the driver will have to be careful and carefully pull the element onto the tire. It is better to buy anti-skid bracelets in order to quickly fix them on the wheel. These elements are installed separately, and any driver can cope with these works.
Selection criteria for anti-skid bracelets
To understand which anti-skid bracelets are better, you need to read customer reviews and familiarize yourself with the varieties of these elements. They differ from each other according to the following criteria:
- chain length;
- the thickness of the links;
- the width of the tape attached to the tire.
The reliability of the fastener will depend on the quality of the materials used and the thickness of the elements. This is the most vulnerable element, which is the first to become unusable. A high-quality bracelet will serve the driver for a long time and will help him overcome difficult terrain.
Set of anti-skid bracelets
Restrictions on the use of bracelets
Installing anti-skid bracelets is a convenient way to overcome winter obstacles. Such elements can help the driver out when the car is slipping due to the fact that the tire tread cannot catch on the road and the wheels spin in vain. But to secure these parts, the driver will need a jack. It should be in every car in case of unforeseen situations on the road.
It is far from always possible to put on a universal element to improve traction, the use of this part has several features:
- before driving, make sure that the tape does not touch the brake discs and does not interfere with the rotation of the wheel;
- it is necessary to constantly monitor the level of tightening of the bracelets in order to prevent their sagging and displacement;
- Wheel slippage must not be allowed (it leads to rapid wear of the bracelets).
Anti-skid bracelets can only be used when moving at low speeds. According to experts, it is impossible to accelerate above 40 km/h on snow or ground, and 15 km/h on ice and rocks. The main hazard when using anti-skid elements is the desire of the driver to drive a small stretch of good road without removing them. But in that case, the car will be difficult to control, it will not be able to accelerate and will create a risk of an emergency.
