What sizes of deburring tool are available?

	Once you have decided on the type of deburring device, you will need to select the correct size tool. Both the manual chamfering cutter and the deburring cutter are available in various sizes.
Head diameter
	The head diameter of a deburring tool refers to the measurement at the widest part of the head. If this size is specified, it indicates the maximum hole diameter that a particular model can deburr.
	Cut diameter However, it is more common to specify the "diameter of cut" of the deburring tool. This information usually consists of two measurements - the minimum and maximum cut diameter. For example, a tool with 5-13mm (13/64 - 33/64) the cutting diameter will allow you to remove burrs in holes with a diameter of 5 to 13 mm.
Angle

Posted

February 21 2023

in