What types of car creepers are there?

Folding car creepers
	Folding car vines are shaped like a folding car vine and a two-in-one seat. They usually have a steel frame with a padded back and a vinyl headrest. The trolley section often has a split back, allowing it to be used in two directions. It takes very little time to switch from a car slider to a seat without any tools.
How to switch from car creeper to seat
Step 1 - Remove the lock Click on the lever to unlock the lock.
Step 2 - Raise the seat While holding the lock lever in the down position, pull the strap on the rear bench up to raise the seat towards you.
Step 3 - Release the Locking Lever Release the lock lever to engage the lock on the seat leg bar and lock it in place.
Car vines with adjustable headrests
Some car creepers come with an adjustable headrest to support the user's head in different positions. The adjustable headrest allows the user to get a better view without straining the neck.
The rear of the adjustable head restraint should have a slotted adjuster with a series of grooves covered by a latch. The adjusting rod has a U-shaped part located between the row of grooves and the retainer.
The height and angle of the headrest are adjusted by inserting the U-shaped part of the adjusting rod into one of the grooves. Simply slide the adjuster bar forward to release the U-shape from the grooves and adjust the headrest to your desired height or angle. Then place the U-shaped part into the groove to lock the headrest in place.
Contour car vines
Contour lianas, as a rule, do not have a soft lining; rather, they are often made of a hard material and are curved to allow the wearer's body to fit comfortably.
The contoured car slider may have a handle at the lower end to allow the user to move, carry, or hang it for storage. Some models also have recesses on both sides that can be used as tool storage trays when performing maintenance.
Led lights Some models of contoured car sliders are equipped with an LED (Light Emitting Diode) that is flexible and can be positioned at any angle to improve working conditions.
Car creepers with raised sides
Raised side car vines allow the user to hold on to either side of the cart while moving to different locations. This can give you more control when moving.
Low profile car creepers
Some automotive vines are shaped like a bone, which is usually made from a single piece of molded polypropylene copolymer. These creepers usually have four large swivel wheels with extra wide tires to easily maneuver over uneven surfaces such as gravel, grass, broken concrete, sand, or garage floor obstacles such as cords or floor drains.