What are the symptoms of clutch bearing wear?

Do you know what a clutch release bearing is for, how long to wait before replacing it, how to replace it ...? If you need answers to these questions, this article is for you!

🚗 What is the role of the clutch release bearing?

The clutch release bearing is driven by fork pressure. It pushes against the clutch to release the clutch disc, providing a connection between the engine flywheel and the transmission. If this connection is interrupted, the system is shut down.

🗓️ How long is the life of my clutch release bearing?

The clutch release bearing can withstand at least 100 km, and often much more: up to 000 or 200 km. It is part of the clutch and therefore usually wears out at the same rate. That is why we advise you to observe the clutch switching frequency (000 to 300 km) in order to keep the clutch system in good condition.

?? What are the symptoms of clutch bearing wear?

Among the symptoms that may indicate a worn, defective, or broken clutch release bearing, you may notice:

• Clutch pedal that sticks to the floor and gets stuck in this position. This means that the fork, stop and pressure plate system no longer works.
  
  
• The clutch pedal offers no resistance and you can no longer change gears. In this case, the clutch release bearing is most likely out of order, although there is still a small chance that it is just a pedal.
  
  
• Clutch release bearing noise (although not supposed to) is noticeable when cornering, but stops every time you press the pedal. This symptom of malfunction should alert you: the clutch release bearing should be replaced as soon as possible by a trusted mechanic.
  
  
• Disconnecting requires effort and jerks. on the pedals. This could indicate a defective stopper, as well as breakage of other parts of the diaphragm.

🔧 What if my clutch release bearing is worn out?

If the clutch release bearing is worn out or you experience any of the above symptoms, you have no choice but to replace it as soon as possible. Driving with a damaged stopper can cause other, more serious injuries in addition to certain discomfort and risks to your safety.

🚘 Do I need to change the clutch release bearing with the clutch kit?

In most cases where the clutch release bearing fails, we strongly recommend replacing the entire clutch kit. This will avoid any risk of failure associated with another part of the system. It is best to consult a mechanic.

The clutch release bearing is part of the clutch kit and plays a key role in it. At the slightest problem, the entire system is in jeopardy and you will no longer be able to drive in good conditions. Are you seeing signs of wear and tear? Find a reliable garage to diagnose your vehicle.