Glue the gimbal: everything you need to know

The gimbal boot can be installed with a cone or with glue at its ends. Also known as transmission bellows, its role plays an important role in protecting transmission system connections from elements such as dust, rain or sand. In this article, we'll share with you everything you need to know about the gimbal glue cover: its role, how to use it, where to find it, and at what price!

🚗 What is the role of the glued gimbal bellows?

The adhesive gimbal cover is different from the classic gimbal cover. However, both must be installed with a hose clamp, the size of which depends on the size of the bellows. In addition, a grease should be used to facilitate the operation.

The cone remains the main tool for installing a standard gimbal cover, it allows you to transfer the boot and then correctly install it on your vehicle before installing the hose clamp.

The gimbal boot to be glued is different because it split on one side... This simplifies installation around the transmission. As such, it is often sold through a generic kit that contains 3 different diameters de homokinetic joints, tube of grease, clamp and tube of glue for installing the bellows. So it allows you to fix side Wheels et side Transmission easily.

Please note that the glue in this kit can also be used for repair any cracks or breaks rubber. However, if your bellows is badly damaged and needs to be replaced, it is recommended replace both bellows at the same time to avoid unbalancing the vehicle while traveling.

🛠️ How to use the gimbal for gluing?

If you need to replace the gimbal bellows on your vehicle with models to be glued, the maneuver will be easier. Really, you don't need to use a cone so that the bellows are positioned around the joints. V slot the latter will thus make it easy to install on the transmission with its seal, clamp and a certain amount of grease.

Then you just need to glue the two rubber bellows pieces using the glue supplied with the bellows. Allow enough pause for the glue to dry and bond the two pieces firmly.

This operation must be repeated on the second cardan anther of the same axis your car. Feel free to save the leftover glue that can be used for minor repairs to the bellows surface. They can appear when you are using your vehicle.

📍 Where to find a gimbal cover to stick on?

The adhesive gimbal cover is a piece of equipment that can be easily found in various institutions. Indeed, it can be purchased at at car dealerships, in your garage, or on various car supplier websites.

If you want to have access to a large selection of models and compare prices, give preference to online sellers.

In addition, you can rely on 3 elements to find out which models of adhesive gimbal boot fit your vehicle:

• Le service book your car : contains manufacturer's recommendations and links to every detail;
• La plate number car : It can be used on online sites to filter search results and display only compatible models;
• Model, brand and year of circulation. : they will be handed over to a professional or listed directly on the internet, this also lets you know which gimbal bellows should be glued which match your car.

💰 What is the price of the glued gimbal boot?

In most cases, an adhesive gimbal cover will be sold complete with adhesive, protective gloves, spacers and hose clips. On average, it takes from 20 € and 30 € per set, depending on the selected brand and model. This amount will need to be multiplied by 2, because two air bags on the same axle will need to be replaced.

It's rarely sold individually, but if you do more research, you should be able to find it.

The glued universal joint boot is a piece of equipment that you can equip yourself to replace the bellows on your vehicle. Once they start showing signs of wear, they will need to be replaced as soon as possible, either by you or an auto mechanic shop!