Glue gun Bosch PKP 7,2 Li
Glue guns are increasingly being used to join various materials. New types of adhesives with wider application possibilities are forcing this technique to increasingly replace traditional mechanical joints.
A glue gun, also known as a glue gun, not dismissively, but with sympathy, is a fairly simple device that facilitates the application and dispensing of hot melt adhesive.
The plastic housing has a mechanism for moving, heating and dispensing glue. The glue stick, or rather a part of it, thrust into a container heated by two metal plates, heats up and dissolves. It only takes 15 seconds and the gun is ready to use. The hot nozzle must not be touched, the adhesive is moved by the corresponding mechanism. When the trigger is pressed, the mechanism moves the solid part of the stick, which in turn will push out, or rather squeeze out, part of the molten mass through the nozzle. The heated adhesive cools down within a short time, thanks to which we have the opportunity to correct the position of the connected elements in relation to each other or, for example, to ensure their perpendicularity with the help of an installation square. At the end of gluing, we can form the still warm glue with a finger dipped in cold water.
Glue gun Bosch PKP 7,2 Li - technical parameters |
|
Glue gun Bosch PKP 7,2 Li It is great for fixing, repairing, sealing and bonding. Adhesives: wood, paper, cardboard, cork, metals, glass, textiles, leather, fabrics, foams, plastics, ceramics, porcelain and many others. Soft and ergonomic Softgrip handle nice to hold in hand. The compact design ensures high comfort of use. Since the tool is equipped with a lithium-ion battery, we are not constrained by the dragging electric wire during operation. Lithium-ion batteries have no memory effect and do not self-discharge.
Glue gun Bosch PKP 7,2 Li has built-in indicators of heating and battery status. A lit green lamp is a sign that we can work. Blinking indicates that the battery has lost 70% of its capacity, and red indicates that it has stopped working for 3 hours, because. the battery needs to be fully charged.
The glue sticks for this type of gun are thinner and have a diameter of 7mm. You need to pay attention to this when buying. Glue leaking from time to time usually stains the workbench or desk at which we work. Cured adhesive adheres strongly to the surface and is very difficult to remove.
A very good remedy for hot glue leaking out of the nozzle is the drip tray located on the charger.
Under the charger, the manufacturer has placed a small store for glue sticks. They are safe there, but easy to find if the chamber runs out of glue.
Attention, carefree artisans and messengers! Keep the glue gun charging contacts away from paper clips, coins, keys, nails, screws, and other small metal objects that can cause a short circuit. A short circuit between the terminals of a lithium battery may cause burns or fire.
In the competition you can get Glue gun Bosch PKP 7,2 Li by 339 points.
