Clearance Jeep Wagonier

Ground clearance is the distance from the lowest point in the center of the car body to the ground. However, the manufacturer of the Jeep Wagoneer measures ground clearance as it suits it. This means that the distance from the shock absorbers, engine oil pan or muffler to the asphalt may be less than the stated ground clearance.

An interesting point: car buyers pay special attention to ground clearance, because in our country good ground clearance is a necessity; it will save you from headaches when parking to curbs.

The ride height of the Jeep Wagoneer is 210 mm. But be careful when going on vacation or returning with shopping: a loaded car will easily lose 2-3 centimeters of ground clearance.

If desired, the ground clearance of any car can be increased using spacers for shock absorbers. The car will become taller. However, it will lose its former stability at high speeds and will lose greatly in maneuverability. The ground clearance can also be reduced; for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will immediately please you.

Clearance Jeep Wagoneer 2021, jeep/suv 5 doors, 3rd generation, WS

03.2021 - p.t.

Packages	Clearance, mm
3.0 AT 4×4 Wagoneer Series II	210
3.0 AT 4×4 Wagoneer Series III	210
3.0 AT 4×4 Wagoneer Carbide	210
3.0 AT Wagoneer Series II	210
3.0 AT Wagoneer Series III	210
3.0 AT Wagoneer Carbide	210
5.7 eTorque AT 4×4 Wagoneer Series I	210
5.7 eTorque AT 4×4 Wagoneer Series II	210
5.7 eTorque AT 4×4 Wagoneer Series III	210
5.7 eTorque AT 4×4 Wagoneer Series I Carbide	210
5.7 eTorque AT 4×4 Wagoneer Series II Carbide	210
5.7 eTorque AT 4×4 Wagoneer Series III Carbide	210
5.7 eTorque AT Wagoneer Series I	210
5.7 eTorque AT Wagoneer Series II	210
5.7 eTorque AT Wagoneer Series III	210
5.7 eTorque AT Wagoneer Series I Carbide	210
5.7 eTorque AT Wagoneer Series II Carbide	210
5.7 eTorque AT Wagoneer Series III Carbide	210