Ground clearance KAMAZ 53605

Content

Ground clearance 53605 restyling 2010, chassis, 1st generation
Clearance 53605 restyling 2010, flatbed truck, 1st generation
Ground clearance 53605 2003, chassis, 1st generation
Clearance 53605 2003, flatbed truck, 1st generation

Ground clearance is the distance from the lowest point in the center of the car body to the ground. However, the manufacturer of the 53605 measures the ground clearance as it suits him. This means that the distance from the shock absorbers, engine oil pan or muffler to the asphalt may be less than the stated ground clearance.

An interesting point: car buyers pay special attention to ground clearance, because in our country good ground clearance is a necessity; it will save you from headaches when parking to curbs.

The ride height of the 53605 is 190 mm. But be careful when going on vacation or returning with shopping: a loaded car will easily lose 2-3 centimeters of ground clearance.

If desired, the ground clearance of any car can be increased using spacers for shock absorbers. The car will become taller. However, it will lose its former stability at high speeds and will lose greatly in maneuverability. The ground clearance can also be reduced; for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will immediately please you.

Ground clearance 53605 restyling 2010, chassis, 1st generation

01.2010 - p.t.

Packages	Clearance, mm
11.8MT10 4×2 3950 Chassis 53605	190
11.8MT10 4×2 4200 Chassis 53605	190
11.8MT9 4×2 4200 Chassis 53605	190
11.8MT9 4×2 3950 Chassis 53605	190
6.7 MT9 4x2 3950 Chassis 53605-48 (A5)	190
6.7 MT9 4x2 4200 Chassis 53605-48 (A5)	190
6.7 MT9 4x2 3950 Chassis 53605-A4	190
6.7 MT9 4x2 4200 Chassis 53605-A4	190