Clearance
Vehicle clearance

Ground clearance Mitsubishi Shariot

Ground clearance is the distance from the lowest point in the center of the car body to the ground. However, the manufacturer of Mitsubishi Chariot measures the ground clearance as it suits it. This means that the distance from the shock absorbers, engine oil pan or muffler to the asphalt may be less than the stated ground clearance.

An interesting point: car buyers pay special attention to ground clearance, because in our country good ground clearance is a necessity; it will save you from headaches when parking to curbs.

The ride height of the Mitsubishi Shariot ranges from 150 to 200 mm. But be careful when going on vacation or returning with shopping: a loaded car will easily lose 2-3 centimeters of ground clearance.

If desired, the ground clearance of any car can be increased using spacers for shock absorbers. The car will become taller. However, it will lose its former stability at high speeds and will lose greatly in maneuverability. The ground clearance can also be reduced; for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will immediately please you.

Clearance Mitsubishi Chariot restyling 1994, minivan, 2nd generation

Ground clearance Mitsubishi Shariot 09.1994 – 09.1997

PackagesClearance, mm
2.0 MZ160
2.0 MX160
2.0 MX Fielo160
2.0 Resort runner MX Fielo160
2.0 Resort runner MX160
2.0 MX crystal lite roof160
2.0 Resort runner MS160
2.0 Resort runner GT160
2.0 Resort runner GT-V160
2.0DT MZ160
2.0DT MX160
2.4 super MX160
2.4 Super MX crystal lite roof160

Ground clearance Mitsubishi Chariot 1991, minivan, 2nd generation

Ground clearance Mitsubishi Shariot 05.1991 – 08.1994

PackagesClearance, mm
2.0 MF160
2.0 MZ160
2.0 MX160
2.0 MX crystal lite roof160
2.0DT MZ160
2.0DT MX160
2.4 super MX160
2.4 Super MX crystal lite roof160

Clearance Mitsubishi Chariot restyling 1983, minivan, 1nd generation

Ground clearance Mitsubishi Shariot 02.1983 – 04.1991

PackagesClearance, mm
1.8DT MF150
1.8 Thanks150
1.8 MH150
1.8 MX150
2.0 ME190
2.0 MF190
2.0MT200

Add a comment