Clearance Toyota Progress
Content
Ground clearance is the distance from the lowest point in the center of the car body to the ground. However, the manufacturer Toyota Progres measures ground clearance as it suits it. This means that the distance from the shock absorbers, engine oil pan or muffler to the asphalt may be less than the stated ground clearance.
An interesting point: car buyers pay special attention to ground clearance, because in our country good ground clearance is a necessity; it will save you from headaches when parking to curbs.
The ride height of Toyota Progress is 160 mm. But be careful when going on vacation or returning with shopping: a loaded car will easily lose 2-3 centimeters of ground clearance.
If desired, the ground clearance of any car can be increased using spacers for shock absorbers. The car will become taller. However, it will lose its former stability at high speeds and will lose greatly in maneuverability. The ground clearance can also be reduced; for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will immediately please you.
Ground clearance Toyota Progres restyling 2001, sedan, 1st generation, G10
04.2001 – 05.2007
Packages | Clearance, mm |
2.5 NC250 Four 4WD | 160 |
2.5 NC250 Four walnut package 4WD | 160 |
2.5 NC250 Four prime selection 4WD | 160 |
2.5 NC250 Four noble interior package 4WD | 160 |
2.5 NC250 | 160 |
2.5 NC250 walnut package | 160 |
2.5 NC250 iR version walnut package | 160 |
2.5 NC250 iR version walnut package | 160 |
2.5 NC250 prime selection | 160 |
2.5 NC250 iR version | 160 |
2.5 NC250 noble interior package | 160 |
3.0 NC300 | 160 |
3.0 NC300 walnut package | 160 |
3.0 NC300 iR version walnut package | 160 |
3.0 NC300 iR version walnut package | 160 |
3.0 NC300 iR version | 160 |
3.0 NC300 noble interior package | 160 |
Clearance Toyota Progress 1998, sedan, 1 generation, G10
05.1998 – 03.2001
Packages | Clearance, mm |
2.5 NC250 Four 4WD | 160 |
2.5 NC250 Four walnut package 4WD | 160 |
2.5 NC250 | 160 |
2.5 NC250 walnut package | 160 |
2.5 NC250 iR version | 160 |
2.5 NC250 iR version walnut package | 160 |
3.0 NC300 | 160 |
3.0 NC300 iR version | 160 |
3.0 NC300 walnut package | 160 |
3.0 NC300 iR version walnut package | 160 |