Clearance Ural 6370

Ground clearance is the distance from the lowest point in the center of the car body to the ground. However, the manufacturer of the 6370 measures the ground clearance as it suits him. This means that the distance from the shock absorbers, engine oil pan or muffler to the asphalt may be less than the stated ground clearance.

An interesting point: car buyers pay special attention to ground clearance, because in our country good ground clearance is a necessity; it will save you from headaches when parking to curbs.

The ride height of the 6370 is 400 mm. But be careful when going on vacation or returning with shopping: a loaded car will easily lose 2-3 centimeters of ground clearance.

If desired, the ground clearance of any car can be increased using spacers for shock absorbers. The car will become taller. However, it will lose its former stability at high speeds and will lose greatly in maneuverability. The ground clearance can also be reduced; for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will immediately please you.

Ground clearance 6370 restyling 2015, chassis, 1st generation

06.2015 - p.t.

Packages	Clearance, mm
11.1 MT 6×6 Chassis for mounting special equipment 4680 34t	400
11.1MT 6×6 Chassis 3825 34t	400
12.9 MT 6×6 Chassis for mounting special equipment 4680 34t	400

Ground clearance 6370 restyling 2015, truck tractor, 1st generation

06.2015 - p.t.

Packages	Clearance, mm
11.1MT 6×6 Truck Tractor 3825 34t	400
12.9MT 6×6 Truck Tractor 4680 34t	400

Clearance 6370 restyling 2015, flatbed truck, 1st generation

06.2015 - p.t.

Packages	Clearance, mm
11.1MT 6×6 Dump Truck 3825 34t	400
12.9MT 6×6 Dump Truck 4680 34t	400

Clearance 6370 restyling 2016, flatbed truck, 1st generation

04.2016 - p.t.

Packages	Clearance, mm
11.1 MT 6×6 Tornado-U	400

Ground clearance 6370 2010, chassis, 1st generation

07.2010 – 05.2015

Packages	Clearance, mm
11.1 MT 6×6 Chassis for mounting special equipment 3825 33t	400
11.1MT 6×6 Chassis 3825 33t	400
11.1 MT 6×6 Chassis for mounting special equipment 4680 33t	400

Ground clearance 6370 2010, truck tractor, 1st generation

07.2010 – 05.2015

Packages	Clearance, mm
11.1MT 6×6 Truck Tractor 3825 33t	400

Clearance 6370 2010, flatbed truck, 1st generation

07.2010 – 05.2015

Packages	Clearance, mm
11.1MT 6×6 Dump Truck 3825 33t	400