Kits for local removal of rust and galvanizing of car body
Content
The kit provides not only the removal of corrosion, but also galvanizing of the problem area. The technique consists in galvanizing the body, which gives protection against rust corrosion, comparable to that done in the factory. The kit provides local removal of the defect without the need to clean the surface of the entire body.
Most owners of cars older than 5 years faced the problem of rust formation, especially for the Russian car industry. You can cope with defects yourself with the help of a kit for local rust removal and subsequent galvanizing of the surface of the car body.
Rust removal kits
In order not to look for chemistry on your own, you can purchase a kit containing everything you need.
"Korocin"
The kit provides not only the removal of corrosion, but also galvanizing of the problem area. The technique consists in galvanizing the body, which gives protection against rust corrosion, comparable to that done in the factory. The kit provides local removal of the defect without the need to clean the surface of the entire body.
Korocin
Recruitment Benefits
Body treatment with "Korotsin" has advantages over other methods of rust removal:
- corrosion is removed from deep pores without mechanical impact, the steel is not damaged;
- galvanic galvanization penetrates into the upper layer of the metal, is fixed in it and provides a stable protective coating that prevents the re-corrosion;
- wire length of 5 meters allows you to galvanize hard-to-reach places on any side of the car;
- the set contains 2 plastic cups that facilitate dosing and eliminate the possibility of product contamination;
- the manufacturer additionally provided spare applicators;
- Zinc plating anode sizes are suitable for large and small areas.
Instructions for use
The procedure for processing the body:
- Remove paint residues and rust from the surface.
- Install the anodized nut on the electrode and tighten, subsequently putting on the felt applicator.
- Process local areas by first fixing the wire on the positive terminal.
- Change the anodized nut to zinc.
- Process the body by analogy with the previous step.
After cleaning, rinse the used equipment with running water.
Zincor
The tool is made in Moscow and is considered an analogue of Korotsin.
Recruitment Benefits
"Zinkor" provides the buyer with a number of advantages compared to other methods of removing corrosion:
- work does not require special skills;
- no need to dismantle the body elements of the machine;
- a double degree of protection is provided (barrier and cathodic);
- subsequent welding of metal sheets and painting is allowed;
- The manufacturer claims a rust protection period of up to 50 years.
When properly applied, re-corrosion is unlikely.
Cincor
Instructions for use
Procedure:
- Connect the wire to the positive terminal of the battery.
- Put a sponge on the electrode and soak it in chemical solution No. 1.
- Mechanically remove rust until it disappears completely (clean chrome elements carefully and only from the outside).
- If traces of corrosion remain, remove them mechanically with sandpaper.
- After processing, the equipment and metal should be washed with running water.
- Reconnect the electrode to the battery.
- Dip the sponge into a container with solution No. 2.
- Apply zinc in continuous movements, rubbing in for several minutes. In the process of processing, you can not stop and allow the appearance of dark spots on the surface.
After the manipulations, the equipment and body parts are washed again. Priming and subsequent painting of galvanized surfaces is carried out after complete drying.
