Crown t40. Is the unique composition effective?
Advantages
The Krown t40 anti-corrosion agent is positioned as a rust converter with a wide spectrum of action and high penetrating power. Like other similar products (for example, Tectyl), it penetrates deeply into all joints and volumes where corrosion spots form, works for a long time, protecting all elements of the structure of the treated metal.
Can be used to prevent corrosion zones on non-ferrous and ferrous metals, parts made of plastic or rubber, protects against erosion. It passes well to all hard-to-reach areas, displacing moisture from there, which stops corrosion processes.
The advantages of Crown t40 are also:
- The possibility of using not only in wheeled vehicles, but also in everyday life, for periodic processing of door locks, window closers, any parts that operate under conditions of intense friction.
- Profitability, non-toxicity and environmental safety, since the product does not contain solvents and harmful additives.
- The absence of increased requirements for the thoroughness of applying the drug to the surface.
- Convenience of processing and duration of the achieved anticorrosive effect.
The unique lubricating properties of Crown t40 also guarantee protection against corrosion, which is caused by stray currents and the constant disconnection of the contact elements of power electrical equipment. In addition, the drug:
- Provides protection against sticking and locking of door locks and latches.
- Prevents acidification of fasteners.
- Eliminates locking of hinges and other moving mechanisms.
Mechanism of action
As you know, such parts of the car as welds formed by spot welding technology, sills, wheel blocks, the bottom of the car and a number of others are subjected to the most intense corrosion. Therefore, the anti-corrosion agent must be able to penetrate all of the above areas, providing them with reliable protection.
Technological rust removal using Krown T40 does not require preliminary surface preparation and its subsequent drying. Crown Anti-Corrosion Treatment components are highly refined oils that contain a range of additives. As a result, an increased intensity of penetration is provided, followed by the extrusion of moisture from the existing gaps. The treated surface receives the necessary protective properties, including rust inhibition. Thanks to a well-chosen ratio of all components, all protected surfaces do not remain in a passive state, and a highly resistant surface film forms a reliable insulating barrier, and becomes an effective conductor for drug molecules.
During the operation of the car, the substances that make up the Krown T40 anticorrosive agent constantly move along the contact surface, during which they eliminate potential pitting corrosion centers. When interacting, the components of the drug demonstrate a high density, due to which they saturate the treated areas with their molecules, and then activate chemisorption (substance absorption) over the entire metal surface; The foregoing makes it possible to eliminate the disadvantages that accompany most conventional methods of anti-corrosion protection.
The mechanism of operation of the tool is as follows. First, molecules of corrosion inhibitors and water repellents are introduced into the surface. Some of them are absorbed and absorbed, and some squeeze out water and solutions of various electrolyte salts, which actively contribute to rusting. After the formation of a monomolecular layer of the inhibitor (the second stage), it migrates to the emerging corrosion spot, where it is fixed by the forces of molecular adhesion.
Crown anti-corrosion treatment: reviews
Users note the convenience of processing due to the fact that the product can be applied to the surface without thoroughly cleaning it from dust and dirt. Those anticorrosive agents that form a surface film require special control over the treated areas in order to detect peeling of the film and the initial areas of rust formation in time. At the same time, the components of Krown T40 do not harden, but remain in an active state, thus filling all the discontinuities that occur over time in the material. Many note the strong contact interaction of the drug with the treated metal, which is carried out at the nanolevel. It is indicated that corrosion inhibitors not only reduce the continuity of the loosened layer of rust, but also remove it towards the surface. There, rust is passivated, further oxidation of the metal stops, and the loose mass itself loses its grip and simply falls off the surface under the influence of dynamic shocks of the car body.
As confirmed in practice, the effectiveness of the action of the considered anticorrosive lasts no more than 24 ... 36 months (depending on the intensity of use of the car). After that, the processing should be repeated.
Many reviews report the fire safety of the composition, and the absence of a negative impact on the environment. It is noted that Krown T40 has dielectric properties and can withstand AC voltages up to 50 kV.
