Motul diesel synthetic oil

Engine oil for gasoline and diesel engines of EURO 4, 5 and 6 standards Technosintez

Advanced Technosynthese high performance engine oil. Recommended for BMW, FORD, GM, MERCEDES, RENAULT and VAG (Volkswagen, Audi, Skoda and Seat) vehicles.

Lots of motor oils. It is quite difficult to choose a suitable oil product from them. Especially when you can find more than a dozen lubricants with the same viscosity from the same manufacturer. Consider the most popular Motul 5w30 oils. What are their varieties and when are they applicable? Let's talk about everything in more detail.

What does the marking 5w30 mean

The technical fluid designation 5w30 refers to the international SAE classifier. According to him, all engine oils can have seasonal and universal applications. Product labeling allows you to recognize them.

If the brand consists only of a digital designation, then the oil belongs to the summer category. It can only be used during the hot season. At temperatures below zero degrees, crystallization of the composition occurs. For this reason, it cannot be filled in winter.

Winter grease contains a number and the letter W in the designation, for example 5w, 10w. It remains stable only with a "minus" outside the window. At positive temperatures, the oil loses its protective properties.

Both types of lubricants bring certain inconveniences to the lives of motorists. Therefore, they are not as popular compared to multipurpose fluids. The marking of universal oils includes the designations of summer and winter lubricants. The Motul 5w30 oil product we are considering belongs to universal compositions. Its viscosity allows it to remain operational from -35 to +30 degrees Celsius.

Specific word

Oils in this series are designed for certain tolerances and therefore have a limited scope. Despite this, they can be found in any area. The lubricant is in demand due to its unique qualities. The composition has passed all possible tests and can replace the original oils of car manufacturers.

• High degree of protection of the power plant.
• Low evaporation.
• Preservation of the oil layer even with prolonged inactivity.
• Neutralization of chemical reactions in the working area.

There are five lubricants with a viscosity of 5w30 in the line.

Specific dexos2

This automotive fluid is 100% synthetic. It was created for GM-Opel powertrains. Your manufacturer requires dexos2 TM oil. The fluid is suitable for engines with any fuel system. The lubricant has energy-saving properties.

Approvals: ACEA C3, API SN/CF, GM-Opel Dexos2.

Specific 0720

The oil product has a limited scope: it is produced for modern Renault engines. These engines use particulate filters and require RN 0720 approved lubricants. There is one exception to this rule. Automotive oil can be used in two models without diesel particulate filters Renault Kangoo II and Renault Laguna III in the 1.5 dCi modification.

Approvals: ACEA C4, Renault RN 0720, MB 226.51.

Specific 504 00-507 00

This fuel and lubricant is applicable in the power plants of modern models of the VAG group that comply with Euro-4 and Euro-5 standards. These engines require auto chemicals with a small amount of harmful impurities.

Approvals: VW 504 00/507 00.

Specific 913D

100% synthetic for fuel economy. It is used in a variety of gasoline engines and in all Ford diesel engines.

Homologations: ACEA A5B5, Ford WSS M2C 913 D.

Specific 229.52

Formulated for Mercedes BlueTEC diesel vehicles. Its engines are equipped with an SCR selective reduction system and comply with Euro 4 and Euro 5 safety standards. The oil can be used in engines with a particulate filter and in some gasoline modifications that require an oil product with a tolerance of 229,51 or 229,31.

Approvals: ACEA C3, API SN/CF, MB 229.52.

Motor 6100

The series is represented by semi-synthetics with a high percentage of synthetics. It is for these reasons that Motul 5w30 6100 oil has effective performance properties that are almost 100% synthetic.

• Stable protection throughout the year.
• Easy start of the power plant.
• Neutralization of oxidative processes.
• Effective cleaning of work surfaces.

The series includes five oil products.

6100 SAVE-NERGY

This oil product is intended for atmospheric and turbocharged installations running on gasoline or diesel. Used in JLR, Ford and Fiat vehicles.

Approvals: ACEA A5B5, API SL, Ford WSS M2C 913 D, STJLR.03.5003, Fiat 9.55535-G1.

6100 Synergy+

The composition is produced according to the patented technology "Technosintez". It is designed for powerful and large-capacity power plants of passenger cars. The oil is actively used in engines with high mileage and in new cars that have just rolled off the assembly line. Motul 5w30 6100 Synergie+ has improved heat resistance properties. Therefore, the lubricant can be used in mechanisms and turbocharged engines with any type of fuel system.

Approvals: ACEA A3B4, API SL/CF, BMW LL01, MB 229.3, VW 502.00/505.00.

6100 SAVE-LITE

This Motul 5w30 oil belongs to the energy-saving category. It allows you to increase the power of the propulsion system and reduce fuel consumption. The lubricant is designed for vehicles manufactured by GM, CHRYSLER, Ford.

The chemical composition of the oil product is compatible with additional exhaust gas purification systems. Suitable for atmospheric and turbocharged units. Can be used on petrol and diesel modifications.

Approvals: API SN, ILSAC GF-5.

6100 SYN-CLEAN

The product is recommended for use in Chrysler, General Motors, Mercedes and VAG engines. It has high performance. It does not contain harmful impurities and is responsible for the safety of catalytic converters and particulate filters. The oil was created specifically for turbocharged and atmospheric power plants that comply with Euro 4-6 safety standards. The composition is suitable for gasoline and diesel engines.

Approvals: ACEA C3, API SN, MB 229.51, CHRYSLER MS11106, GM dexos2, VW 502.00/505.01.

6100 SYN-NERGY

This Motul 5w30 oil is recommended for VAG, BMW, Renault and Mercedes vehicles. Specially developed for powerful and ultra-modern petrol and diesel engines. The lubricant is suitable for both turbocharged and atmospheric modifications.

Approvals: ACEA A3B4, API SL, BMW LL01, MB 229.5, VW 502.00/505.00.

Motor 8100

This is the most popular line in the assortment of the manufacturer. It is represented by high quality synthetics. Available in many varieties, including energy-saving ECO oils and more versatile X-Clean petroleum products.

• They have a wide range. Compatible with Asian, American and European engines,
• They have a fully synthetic base without the addition of natural ingredients.
• They are highly resistant to oxidation.
• Helps save fuel.
• Ensure the vehicle starts safely.

The series includes five varieties of oils with a viscosity of 5w30.

8100 ECO-LITE

This development of the company consists of a 100% synthetic base and a package of additives that provide an increase in engine life. Motul 5w30 8100 ECO-LITE is suitable for powerful passenger cars equipped with a gasoline or diesel fuel system. Has energy saving properties.

See also: best breathalyzer for personal use

Certification: ILSAC GF-5, API SN+, GM dexos1, Ford M2C 929 A, 946 A.

8100 X-CLEAN+

The grease is designed for engines of Skoda, BMW, Mercedes and Audi vehicles that comply with Euro-IV and Euro-V standards. The product is suitable for systems equipped with particulate filters.

Approvals: ACEA C3, BMW LL04, MB 229.51, Porsche C30, VW 504.00/507.00.

8100 ECO-CLEAN

This high-tech oil product has energy-saving properties. It is designed for ultra-modern vehicles with petrol or diesel engines that comply with Euro 4 and Euro 5 safety standards. The composition is compatible with systems for additional purification of exhaust gases.

Approvals: ACEA C2, API SN/CF, PSA B71 2290.

8100 X-CLEAN FE

This composition provides a high level of protection of mechanisms against wear, increased efficiency of the power plant and significant fuel savings. Designed for the latest generation of gasoline and diesel engines with and without turbocharging, as well as with direct injection.

Approvals: ACEA C2/C3, API SN/CF.

8100 X-CLEAN EFE

This oil product is intended for gasoline and diesel power plants that comply with Euro IV-VI standards.

300V motor

This series of Motul 5w30 oils is designed for central sports cars. The duties of the oil product include protecting the engine and increasing its power. The oil has improved anti-wear properties. It does not burn and does not allow dirt to interfere with the operation of mechanisms. The line is produced using Ester Core technology, which involves the use of esters. Esters are esters that are formed as a result of the combination of alcohols and fatty acids of plant origin. Its unique property is polarity. It is thanks to her that the oil layer is "magnetized" on the metal surfaces of the unit and provides guaranteed protection for the entire system.

• Reliable XNUMX/XNUMX engine protection.
• Wide operating temperature range.
• Easy engine start in cold weather without oil starvation.
• Economy of a fuel mix even at excessive loadings.
• A durable oil film that levels the surfaces of structural parts and minimizes friction losses.

In the 300V line, the manufacturer has provided only one type of fluid with a viscosity of 5w30.

300V Power Racing

The composition is actively used in racing competitions. It is designed for the latest generation of sports engines running on gasoline or diesel. The oil product has excellent anti-wear properties that provide reliable protection of the power plant during extreme driving styles.

Tolerances: Exceeds all existing standards.

Technical specifications

In order to compare the technical characteristics of all varieties of Motul 5w30, we will enter them in the table.

Indicator / grade	Film viscosity at 100℃, mm/s²	Dynamic viscosity at -40℃, mPa*s	Boiling point, ℃	Pour point, ℃	Density, kg / m³
Specific Dexos2	12.00	69,60	232	-36	850.00
Specific 0720	11.90	68.10	224	-36	850.00
Specific 504 00 507 00	11.70	72.30	242	-39	848.00
913D special	10.20	58.30	226	-42	851.00
Specific 229,52	12.20	73.30	2. 3. 4	-42	851.00
6100 ENERGY SAVING	10.20	57.10	224	-3.4	845,00
6100 SAVE-LIGHT	12.10	69,80	238	-36	844.00
6100 Synergy+	12.00	72,60	232	-36	852.00
6100 SYN-CLEAR	12.70	73,60	224	-31	851.00
6100 BLUE-NERGY	11.80	71,20	224	-38	852.00
8100 ECO-LIGHT	11.40	67.00	228	-39	847,00
8100 ECO CLEAN	10.40	57,90	232	-42	845,00
8100 X-CLEAN+	11.70	71,70	242	-39	847,00
8100 X-CLEAN FE	12.10	72,90	226	-33	853.00
8100 X-CLEAN EFE	12.10	70.10	232	-42	851.00
300W power working	11.00	64.00	232	-48	859

How to distinguish a fake

Motul 5w30 engine oil has many advantages. But it has a very important drawback: it attracts intruders. The oil product has attracted the attention of scammers because of its great popularity. Now counterfeit products can be found in almost any city. How can you save yourself?

First of all, you need to study the official website of the manufacturer and familiarize yourself with the addresses of its company branches. Only at such outlets can you buy real oil. This rule applies to all well-known brands of “oil.

When visiting company departments, you need to issue quality certificates for petroleum products. Only the presence of such documents confirms the authenticity of the goods.

If the seller has provided all the required documents, a visual inspection of the boat should be carried out.

Remember, any dents, chips, a crookedly attached label, and the absence of a measuring scale will indicate a fake. The original Motul 5w30 has the perfect packaging:

• The plastic is evenly colored, there are no notches, glue seams are invisible. The canister does not emit an unpleasant odor.
• On the reverse side of the container, the date of oil bottling and the batch number are marked with a laser.
• The retaining ring fits the lid perfectly.
• The text on the label is easy to read, does not contain errors, the images also have clear outlines and bright colors.

See also: Tuareg from the movie Rippers

If all these points are met, then engine oil can be poured under the hood of your car.

The entire range of Motul 5w30 oils has high performance characteristics. Petroleum products ensure stable and coordinated operation of mechanisms, preventing them from overheating and saving the fuel mixture. The composition will increase the resource of the propulsion system only with its correct selection. Otherwise, it will be impossible to achieve the desired results.

There are certain technical differences between the principles of operation of diesel engines and the principles of operation of gasoline engines. Based on this, owners of diesel cars have questions:

What oil is suitable for diesel engines?

What is the difference between diesel engine oil and gasoline engine oil?

The main element of the engine is the combustion of fuel in its bowels and the subsequent transfer of combustion energy to the movement of the piston and beyond.

In diesel engines, due to the peculiarities of their work, a large amount of soot remains during the combustion process, and the fuel itself often does not burn out completely. All these adverse phenomena lead to the formation of soot in the internal combustion engine and its severe wear.

Oil for a diesel piston engine must have a number of properties:

• Oxidation resistance
• High washing performance
• Good dispersion properties (prevents settling of formed soot particles)
• Maximum property stability

It's no secret that Motul oils are renowned for their excellent detergent and dispersant additive packages. Thanks to these properties, the oil will be less susceptible to aging and wear during operation, which, in turn, will allow the diesel engine to remain in good technical condition longer and increase its service life.

Motul manufactures oils for all types of diesel and turbodiesel passenger car engines.

Many Motul oils are multipurpose oils, i.e. suitable for both diesel and gasoline engines. This suggests that a special additive package has been added to the oil, which is equally suitable for different types of engines.

Oils for diesel passenger car engines form a special class according to the worldwide API classification - the API CF class.

According to the ACEA classification, oils for diesel vehicles are indicated by the letter B and a number (for example, B1, B3, etc.)

“The number after the Latin letter indicates the performance properties of the oil, the higher the number, the better the properties. Oils A and B correspond to numbers 1 to 5, oils E - from 1 to 7.

That is, if you want to find an oil that meets the requirements of the “passenger diesel cars” class on our website, you just need to:

In the catalog that opens, you can find several filters in the left column.

In this block, you need to select "API" -> "CF"

Select "ACEA" -> "ACEA B1" (B3, B4, B5)

• After that, the screen will display a complete list of Motul oils that meet the requirements of this class and have received the appropriate approvals.

The further choice of oil for your car will be dictated by the requirements of the engine manufacturer.

Motul's product line includes 100% synthetic, mineral and semi-synthetic oils in various SAE viscosities.

Additives

If the fuel system of your diesel engine is still clogged, we can offer you a special flushing additive Motul Diesel System Clean. It will allow you to process condensate in the fuel line, lubricates and protects it.