Do I need to flush the engine of a new car at a standard oil change interval

Specialists of service centers involved in the repair of automotive power units often note that the main cause of poor performance or even engine breakdowns is pollution. And first of all, those of them that are certainly formed on engine parts during the combustion of the fuel mixture.

Of course, most of the exhaust gases leave through the exhaust pipe, but a small part of them somehow breaks into the lubrication system and forms carbon deposits, deposits and varnishes. It is these types of contaminants that cause corrosion, improper operation and accelerated engine wear. Moreover, both “old” (that is, with high mileage) and relatively “young” motors are subject to this. With regard to the latter, by the way, a certain category of drivers has an erroneous opinion that when changing engine oil, you can do without first flushing the lubrication system. Say, the engine is fresh, it still has a huge resource, and besides, it works on “synthetics”, which itself seems to “wash” the engine quite well. The question is, why wash it?

However, according to experienced craftsmen, the motor must always be flushed! And all because even in a new engine, after draining the old oil, there is always, regardless of the type of lubricant used, the so-called non-draining residue of “working out”. And it can be neutralized only by timely washing. Moreover, today for this purpose there are specialized formulations of fast and effective action on sale.

One such product is the German Oilsystem Spulung Light flush, developed by chemists at Liqui Moly. Among the main advantages of this drug, experts note such properties as minimizing the non-draining (from the engine) residue of used engine oil and effective, layer by layer, removal of contaminants from the lubrication system. Another important quality of Oilsystem Spulung Light is that, unlike flushing oils and numerous cheap analogues, this flushing does not remain in the system after draining the oil, but evaporates. And the absence of aggressive solvents in it makes the drug absolutely safe for all engine parts. The tool is universal in its application and is suitable for both gasoline and diesel engines.

You can use the Oilsystem Spulung Light flush on your own, even a novice car enthusiast can do it. The procedure is simple: just before draining the old oil into the lubrication system, it is necessary to fill in the contents of the flush bottle and then let the engine run for 5-10 minutes. After that, it remains only to drain the old oil along with the washed soot. Cost-effectiveness, versatility and ease of use of Oilsystem Spulung Light guarantee an effective result of the performed preventive procedure, which will save you a lot of trouble in the future. This product is recommended for cars with mileage up to 50 km, including those under warranty. It is clear that an express flush of the lubrication system is necessary at each oil change.