Find and fix your electric bike breakdown – Velobecane – Electric bike
Today we will see how to diagnose your e-bike breakdown.
First of all, we put the battery on the bike in the "ON" mode. It is very important to enable it.
You can test by holding the battery down, the indicator lights will turn on. The appearance of red light is normal.
2) There are two models for screens: LED screen and LCD screen. Both screens have an ON button in the center. You have to hold it down for three seconds for the screen to light up.
First test: pedaling. If you are at home, raise the rear wheel and pedal by hand.If the electric assistant doesn't work, there are a few things to check on your electric bike.
First test: always raise the rear wheel, turn on the screen.You push the button "-" for ten seconds and you check if the engine is running or not.
If the engine is running, it means that the malfunction of your electric booster when you press the pedal is that it does not work, the problem is also the following:
pedaling sensor.
ou2) controller.
If the engine does not start, check the center of the handlebars.There is a scabbard that needs to be removed a little.You have two brake levers with brake release.You must unplug the tips that are still red and repeat the test.
When the engine fails to start, there are three possibilities for a defective part:1) controller2) engine3) cable
Faulty rear or front light that does not work:1) the light no longer works2) front light cable is not properly connected3) for the rear light, check if the cables are connected to the controller correctly.
Test: if the buzzer works, it means the control box is working and the lamp needs to be replaced.If the horn does not work, the control unit will have to be replaced.
Another glitch: you no longer see the battery on the screen while the bike battery is charged? Keep the 3 buttons on the screen pressed for three seconds and the screen will work again.
It is also checked that the cable is not damaged or torn. We check the brakes for a break in the seal. That all the bunches are correct, and the same at the back.
Today we saw how to diagnose a malfunction. For any repair, to learn how to properly connect and disconnect all electronic parts of your electric bike, here is a video dedicated to it.
