Reverse hammer for CV joints: TOP-8 best models
Content
- What are SHRUS
- The best CV joint pullers
- Universal CV joint puller with reverse hammer LICOTA ATC-2139
- Puller JTC AUTO TOOLS 1016
- SHRUS puller VAZ 2108-10 (SK) 77758
- Universal outer CV joint puller
- Puller universal external CV joint "Mastak" 104-20002
- CV joint puller universal JTC
- CGWA-15 Universal outer CV joint puller
- Universal outer CV joint puller CAR-TOOL CT-V1392A
Before using a CV joint puller with a reverse hammer, you must carefully study the car disassembly diagram and the drawing of the device. It is important to carry out all work carefully so as not to damage other parts and to return all dismantled parts of the machine without problems.
The reverse hammer for CV joints is a specialized equipment that is used in car services to perform repair work. The device is used in cases where it is impossible to access the inside of the element in order to perform manipulations. The principle of operation of this equipment is based on the work of a vacuum, which attracts the part to the tool, performing the opposite action to clogging. This method is widely used in body repair. It is also used to remove CV joints.
What are SHRUS
A CV joint is a constant velocity joint. It replaces the cardan joint. The device of this element is complex, so it requires periodic professional maintenance, repair and even replacement. The part is a bearing with a floating cage, and the axle shaft of the front suspension and the hub are attached to its cages. Due to the unusual shape of the case, the device is called a grenade. It is non-separable, therefore, when worn, it is often changed entirely.
Removing CV joints
To remove the worn-out element, it is necessary to use a reverse hammer for CV joints. There are several types of parts with which you can repair any vehicle.
The best CV joint pullers
The reverse hammer for removing the "grenade" should help the master easily and quickly separate the elements. It is important that during operation the possibility of damage to the inner roller bearing or the gearbox housing is minimized. A properly functioning device will facilitate the work of the master and help him quickly replace damaged parts.
The CV joint puller with reverse hammer is an inertial tool that is used to remove the “grenade” without removing the entire suspension assembly. The device works as follows:
- With the help of an eye, the reverse hammer is attached to the axle shaft.
- The master performs several sharp blows.
- The retaining spring is compressed.
- The splined connection comes out of the cage.
As a result, the part can be easily and quickly removed for service or replacement. With the help of such a tool, the work is done without any extra effort.
In addition to this device, the services use grenade boot removers. The principle of their work is based on the peculiarities of using a wedge. Adjustable force is created using two support platforms. Clamps (first platform) put pressure on the axle shaft, which is to be removed, and split rings (second platform) rest on the cage. Between the elements is a wedge that provides equal effort on both sides. When force is applied to it, the retaining ring is displaced by 3–5 mm, and the part travel is released. According to this principle, manual and pneumatic tools work.
If the CV joint is already removed, then a screw puller can be used. There are universal tools used in services, and home-made tools made specifically for one car model by the driver. The device consists of two thrust pads with perpendicular rods, where there are holes for changing the distance between the elements. One of the platforms is fastened with a clamp, and the second is put on the threaded connection of the axle shaft. As a result of the rotation of the hub nut, a force is created that can compress the retaining rings.
Despite the convenience of a homemade tool, many auto repair shop owners and drivers who are accustomed to repairing a car on their own choose ready-made factory-made equipment. It is inexpensive, passes tests for reliability and durability. It is developed taking into account the wishes of motorists and car repairmen.
Universal CV joint puller with reverse hammer LICOTA ATC-2139
The LICOTA ATC-2139 universal CV joint puller with reverse hammer is a simple device that can be used in the repair of most vehicles. The ATC 2139 is reliable, easy to use and convenient.
Universal CV joint puller with reverse hammer LICOTA ATC-2139
| Characterization | Value |
| Capture size, mm | 48 |
| Device weight, kg | 2,3 |
Puller JTC AUTO TOOLS 1016
A handy puller made by a Taiwanese company. With this device, the craftsmen carefully remove the damaged “grenade” without harming the crankcase or bearings.
Puller JTC AUTO TOOLS 1016
| Characterization | Value |
| Length, mm | 90 |
| Width | 80 |
| Height, mm | 60 |
| Weight, kg | 0,530 |
SHRUS puller VAZ 2108-10 (SK) 77758
Inexpensive and practical CV joint puller VAZ 2108, which can be used to repair a personal vehicle or purchased to equip a car service. This is a domestic-made device from a responsible company that supplies various metalwork tools.
SHRUS puller VAZ 2108-10 (SK) 77758
| Characterization | Value |
| Capture size, mm | 63 |
| Country of manufacture | Russia |
Universal outer CV joint puller
A universal tool is purchased to remove the outer CV joint from a front-wheel drive or all-wheel drive car. When using this device, the master does not have to dismantle the drive axles to remove the “grenade”.
Universal outer CV joint puller
The equipment has a working range from 110 to 240 mm and its overall width is 140 mm. The diameter of the axial hole is 30 mm. It is pleasant and comfortable to use such equipment, it is in every car service.
Puller universal external CV joint "Mastak" 104-20002
This grenade remover is made of durable and wear-resistant metal. Thanks to this, it is durable and reliable even with active use. In the reviews, the masters mention the high quality of the materials used to create the tool, and the excellent value for money products.
Puller universal external CV joint "Mastak" 104-20002
The kit includes two studs, two segmented tie bars, two tie bolts. The puller is manufactured in Taiwan by order of a Russian company and under the supervision of its specialists.
| Characterization | Value |
| Length of the inner part, mm | 200 |
| Width of the inner part, mm | 95 |
| Hole diameter inside the stop bracket, mm | 2,9 |
CV joint puller universal JTC
JTC's handy CV joint removal tools are used by many garages. The device has gained popularity in Europe, the USA and Russia. There are several modifications of such equipment. It is used when performing work on various vehicles.
CV joint puller universal JTC
The technique is a bracket made of durable metal with standard holes, to which a part is attached to remove "grenades".
CGWA-15 Universal outer CV joint puller
It is convenient to remove CV joints using a universal and convenient device - CGWA-15. This is a simple and reliable tool that every car service or garage should have to get the job done quickly and easily.
| Characterization | Value |
| Weight, kg | 1,95 |
| Dimensions, mm | 250 * 150 * 80 |
Universal outer CV joint puller CAR-TOOL CT-V1392A
You can buy this universal puller to service most cars with front or all-wheel drive from Niva to Mercedes. The device is made of durable metal and covered with protective paint. With it, the master will quickly perform all the necessary work. The production is located in Taiwan, the craftsmen use high-quality raw materials to create equipment, and the best engineers are involved in the creation of device drawings.
Universal outer CV joint puller CAR-TOOL CT-V1392A
| Characterization | Value |
| Weight, kg | 2,5 |
| Diameter, mm | 30 |
| Length, mm | 230 |
Before using a CV joint puller with a reverse hammer, you must carefully study the car disassembly diagram and the drawing of the device. It is important to carry out all work carefully so as not to damage other parts and to return all dismantled parts of the machine without problems. Any motorist will be able to perform all the actions without outside help. With a reliable and high-quality tool, he will not have problems replacing or maintaining the “grenade”.
