Reverse hammer for removing the axle shaft from the Niva: the best models
Content
The device is made of durable metal alloy. Quality is DIY. Rod - with a rubberized handle and stop. The load is a sleeve of a simple shape. The nozzle is a rectangular bar with a round threaded hole in the center for fixing on the rod and two slots along the edges for fastening with wheel bolts to the flange. The tip is additionally held on the guide with a high nut. The mass of the inertial structure is 4,3 kg. Dimensions (length, width, height) - 570x160x70 mm.
The reverse hammer for removing the axle shaft from the Niva, including those produced under the Chevrolet brand, is similar in design to other inertial devices. When choosing a tool, it is necessary to take into account the diameter of the circle on which the mounting holes for mounting the rims are located. The parameter is called "drilling" and is abbreviated as PCD (Pitch Circle Diameter).
For people who repair and maintain a car on their own, the quality of products began to be abbreviated as DIY (do it yourself - do it yourself). At the same time, the tool can have characteristics that are not inferior to the technical parameters of devices for professionals.
The review presents reverse-action hammers that help remove the Niva and VAZ classics drive shafts and are affordable for an ordinary motorist.
Reverse hammer for removing the axle shaft AV steel 2101-07, “Niva” AV-922767
The AV steel trademark was created by the Voyage group of companies in 2012. Established production of hand and pneumatic tools and equipment at a factory in China. Products are intended for private use, as well as for use in car repair organizations.
The product is used for dismantling the axle shafts of cars of the Volga Automobile Plant, including all rear-wheel drive models and Niva. It is also suitable for removing constant velocity joints (CV joints) VAZ-2108.
The device is made of durable metal alloy. Quality is DIY. Rod - with a rubberized handle and stop. The load is a sleeve of a simple shape. The nozzle is a rectangular bar with a round threaded hole in the center for fixing on the rod and two slots along the edges for fastening with wheel bolts to the flange. The tip is additionally held on the guide with a high nut. The mass of the inertial structure is 4,3 kg. Dimensions (length, width, height) - 570x160x70 mm.
Axle puller, reverse hammer universal "AVTOM-2"
The Voronezh company "AVTOM-2" has been known in the country since 1990. It produces a wide range of special tools for service stations and car repair shops, private and industrial use at its own production facilities.
The presented reverse hammer for removing the axle shaft from the Niva and Chevrolet, as well as VAZ cars with rear-wheel drive, is identical to the AV steel product. Excellent are:
- weight - 3,0 kg;
- dimensions - 580x190x170 mm;
- the shape and number of nozzle holes.
The tip has a through thread for mounting on the device rod and four asymmetrically located slots for fixing on the part to be dismantled.
The price tag of the product is 1400–1500 rubles.
Reverse hammer "SERVICE KEY" for removing the axle shaft 2101-07, Niva; SHRUS 2108
The firm "SERVICE KEY", founded in 2001, supplies tools for car repair and fitter and assembly work. Production has been established at factories in Russia and China.
The reverse hammer in question for removing the axle shaft from the Niva and Chevrolet was manufactured at a Russian enterprise. Like the previous devices, it is also used to dismantle the drive shafts of the Zhiguli, the GXNUMX CV joints.
Outwardly, the product is similar to the products of the AV steel brand. The quality is confirmed by a certificate, professional. Weight - 4,0 kg. Dimensions - 550x150x80 mm.
You can buy a reverse hammer for removing the axle shaft from the Niva for 1200-1300 rubles.