Fire from a car muffler - methods and techniques for re-equipping a car with a fiery exhaust
Auto repair

Fire from a car muffler - methods and techniques for re-equipping a car with a fiery exhaust

It is not difficult to make a fire from a silencer even in cars with standard factory equipment. There are several ways to make the car shoot at the silencer. First of all, it is necessary to ensure that the fuel can enter directly into the exhaust system.

The attention of others at a defiant start is always attracted by the screech of tires, but the fire from the muffler will make a vivid impression. True, few people know how to make a shooting exhaust on a car.

car fire exhaust

In some racing movies, cars can be seen taking off and spewing flames from mufflers. It looks beautiful, and this is possible not only on TV screens. In real life, making a shooting exhaust on a car will not be a problem.

Fire exhaust cars

Although styling fire from a muffler looks amazing, a car with a fire exhaust requires proper tuning. Otherwise, at best, the exhaust will not work correctly, at worst, it will adversely affect the exhaust system and engine operation. Also, an incorrectly tuned exhaust on a car with fire can lead to a fire in the car.

Make a shooting exhaust on a car

It is not difficult to make a fire from a silencer even in cars with standard factory equipment. There are several ways to make the car shoot at the silencer. First of all, it is necessary to ensure that the fuel can enter directly into the exhaust system. To do this, you can press the gas to the floor on the car, warming up the engine, turn off the ignition and press the gas. Since there are no flares in the cylinder block, fuel will directly enter the exhaust system. As soon as the speed drops, immediately turn on the ignition to avoid the car plugging.

Fire from a car muffler - methods and techniques for re-equipping a car with a fiery exhaust

DIY exhaust

You can also unscrew a couple of spark plugs and close them with plugs so that the fuel is not in the engine compartment. It is necessary to select 2 opposite cylinders. One of them will be at top dead center, the other at bottom dead center. Thus, the engine will work correctly, and we will be able to make a firing muffler of the car.

Make a shooting car muffler

We figured out the fuel, it remains to add fire to the exhaust. It's easy to do this:

  1. You need to run another wire from the ignition coil to connect the additional coil.
  2. In the exhaust pipe, 10 cm from the edge, you need to drill a hole for the spark plug sleeve.
  3. It is necessary to securely fix all this, weld it, screw the nut under the candle and install the spark plug. The flame exhaust is ready.

True, if it works constantly, then it is very dangerous. Therefore, the ignition coil wire is disconnected and installed on a separate switch in the cabin.

Also, do not try to make as much fuel as possible in order to shoot fire later, because this is unsafe and can lead to an explosion at any time.

Make the car shoot the silencer

Of course, not everyone understands the structure of a car, and for non-professionals, making a fire exhaust system with their own hands seems very difficult. That is why there are universal ready-made solutions that consist of a block for a car with a fiery exhaust.

Anyone can buy such a product, and even the most inexperienced driver can be sure of their own safety. But only after reading the instructions and following the rules. They state that the system cannot be used for more than 3 seconds in manual mode to protect the engine and exhaust system. It is also not recommended to use it when there are any objects, people and cars nearby.

Fire from a car muffler - methods and techniques for re-equipping a car with a fiery exhaust

Exhaust block

All responsibility for the damage caused falls on the shoulders of the owner of the car. The instructions for use also indicate that this device is recommended for use only at special shows, and not on public roads.

See also: How to put an additional pump on the car stove, why is it needed

Curious cases with fire cars

Installing your fiery exhaust on a car is an opportunity to make a car start defiant and daring. But do not forget about safety. There are those who want to save money on installing a flame exhaust and do it themselves without even having basic skills and knowledge. Well, if everything is correctly installed.

But accidents often occur when car bumpers or tires catch fire. Only after that comes the realization that it was not worth saving on installing the system. When a car ignites from a fire in the muffler, in a panic it may seem that if you drive faster, the flame will immediately go out. But in practice, the flame ignites only stronger.

We make a FIRE EXHAUST with our own hands

Add a comment