Error 24 and error 30 on your Velobecane – Velobecane – Electric Bike
Various error codes that your Velobecane electric bike may have.
There are 4 types of errors:
– Error 24
– Error 25
– Error 30
– Low battery indicator
Error 24:
Error 24 occurs when the cable of your Velobecane electric bike is not properly connected or
damaged. To do this, you must make sure that your cable is correctly connected arrow to arrow,
straight pins and that the controller cable rises well above the line that runs on the cable
engine.
Error 25:
Error 25 appears when powering on the Velobecane electric bike while trying
turn on the bike while keeping your hands on the brake levers or if
your brake lever is disconnected or damaged.
Error 30:
Error 30 appears when there is a bad connection between your controller, harness (main
cable), shield, pedaling sensor or motor. To do this, you must open the box where it is
find your electric bike controller, then check that the wiring harness and
the pedals are correctly connected and not damaged. It is also necessary to check that the pins
right. If everything is in order, it will be necessary to check the connection of your screen.
Battery discharge indicator:
When the battery is 100% charged and only one bar is displayed or nothing is left on it.
screen, you will need to turn off the screen, then press the 3 buttons on the screen (+, -, Power)
simultanément pendant 3 seconds.