Basics in Biker Tool Kit

In case of unforeseen circumstances on the road, it is better to have toolbox at hand. If you need to make small adjustments, tighten or even repair something, it is better to have the necessary and suitable tools. Otherwise, you run the risk of being stuck in the unknown, unable to act.

This is why, when you are piloting a two-wheeled vehicle, you should consider the toolbox as a must-have accessory, like a helmet and a glove.

What should it contain? What should you put in there? Find out what should be in a biker's toolbox.

Keys to be put in the biker's toolbox

At the top of the required list on the toolbar are the keys. Keys, because there are all kinds of them, and since they each have a role to play, you must have them all.

Basic Keys

In your toolbox, you should find:

• Set of wrenches, all sizes (from 8 to 24). It is best to choose mixed models that have a crotch on one side and an eyelet on the other. They are more practical, efficient and better protect your nuts.
• Allen key setto tighten and loosen the screws and bolts.
• Pipe wrench set, all sizes. You will find hex and 6-point wrenches on the market. To choose, go with the first one, with hollow tubes.

Special usage keys

Specific clues are important in the sense that you can only solve a problem with them if necessary. This includes:

• Wrench, allowing you to adjust the applied clamping force as needed.
• Spark plug wrenchto be used to replace spark plugs on a motorcycle. Be careful when choosing a model that is adapted to the size of the candle installed on it.
• Oil filter wrenchwhich, as the name suggests, should be used for the oil filter. Again, you must select a model that is compatible with the filter size. Otherwise, you will find generic models that can be used with any filter.

Screwdrivers and pliers to put in the biker's toolbox.

Whether you are doing minor adjustments, maintenance or repairs, you will always need screwdrivers and pliers.

Basic screwdrivers in biker toolbox

To be well prepared, remember to put in your toolbox flat and Phillips screwdrivers... And to get to the end of all the propellers on your motorcycle, consider taking all available sizes.

Particularly for Phillips screwdrivers, you will have a choice between Philips notched and Pozidriv notched screwdrivers. Both are fine, but if you had to choose, go for the former.

Pliers to put in the toolbox

You should also find pliers of all kinds in your toolbox. In particular, you will need the pointed nose pliers, better known as "Nippers"; water pump pliers and universal pliers.

While not required, you may also need pliers, pliers, vise, and snap ring pliers.

Items to be put in the biker's toolbox

Some products can be very convenient and it is always best to have them on hand when needed. This includes:

• You dégrippantwhich comes in handy if you have some sturdy screws left.
• Degreaserwhich is very effective in cleaning parts that are often exposed to grease, and also allows you to clean the brakes well.
• Смазка chains for regular lubrication of the chains, knowing that this should be done approximately every 500 km.
• White fat for the lubrication of parts and parts often subject to friction and moisture.

To complete everything, also remember to pack in a pair of gloves, a rag, a headlamp, a chisel, a hammer, and why not, a charger.