P0301 Misfire in cylinder 1
OBD2 Error Codes

P0301 Misfire in cylinder 1

Datasheet P0301

Misfire detected in cylinder No. 1

What does error code P0301 mean?

This Diagnostic Trouble Code (DTC) is a generic transmission code, which means it applies to OBD-II equipped vehicles. Although general, specific repair steps may differ depending on the brand / model.

The P0301 code means that the vehicle computer has detected that one of the engine cylinders is not working properly. In this case, this is cylinder # 1.

Symptoms

Symptoms may include:

  • engine may be harder to start
  • the engine may trip / trip and / or vibrate
  • other symptoms may also be present

Causes of the P0301 code

The P0301 code may mean that one or more of the following events have occurred:

  • Defective spark plug or wire
  • Defective coil (packaging)
  • Defective oxygen sensor (s)
  • Defective fuel injector
  • Exhaust valve burnt out
  • Defective catalytic converter (s)
  • Out of fuel
  • Bad compression
  • Defective computer

Possible solutions

If there are no symptoms, the simplest thing is to reset the code and see if it comes back.

If there are symptoms such as engine stumbling or wobbling, check all wiring and connectors to the cylinders (eg spark plugs). Depending on how long the ignition system components have been in the vehicle, it may be a good idea to replace them as part of your regular maintenance schedule. I would recommend spark plugs, spark plug wires, distributor cap and rotor (if applicable). If not, check the coils (also known as coil blocks). In some cases, the catalytic converter has failed. If you smell rotten eggs in the exhaust, your cat's converter needs to be replaced. I also heard that on other occasions the problem was faulty fuel injectors.

  • i movement.
  • Unusual increase in fuel consumption.

As you can see, these are fairly common symptoms that can also appear in connection with other error codes.

Repair Tips

Upon delivery to the store, the mechanic will usually perform the following checks to accurately diagnose this DTC.

  • Scan for error codes with an appropriate OBD-II scanner. Once this is done, we will proceed with a test drive to see if the error code reappears.
  • Inspect the spark plug wire for cylinder 1, which may have failed due to wear.
  • Inspect the spark plug for signs of wear.
  • Inspect coil packs for signs of wear.
  • Inspect wiring and replace worn or burnt parts.
  • Inspect the distributor cap and rotor button and replace them if they are cracked or worn.
  • Checking the engine control module (ECM or PCM), which, in the event of a malfunction, will need to be reprogrammed.

Before proceeding with the replacement of spark plugs, cables, coil packs, it is always recommended to first carry out a thorough visual inspection, as indicated above. This is to avoid unnecessary replacement of a component that is working correctly and therefore will not fix the problem.

Error code P0301 indicates a serious enough problem that can affect the vehicle's directional stability while driving, so it is not recommended when this code appears. A car suddenly stopped in a traffic jam on the street is undoubtedly a very big problem. The reason why a car with code P0301 should be taken to a mechanic as soon as possible.

It is difficult to estimate the upcoming costs, since a lot depends on the results of the diagnostics carried out by the mechanic. Usually the cost of replacing candles and coils in the workshop is about 50-60 euros.

Frequently Asked Questions (FAQ)

What does code P0301 mean?

DTC P0301 indicates a cylinder 1 misfire problem.

What causes the P0301 code?

The reason for triggering this code is often related to faulty spark plugs.

How to fix code P0301?

The spark plugs and wiring system must be carefully checked. Often it is enough to simply clean these components from mud deposits.

Can code P0301 go away on its own?

Code P0301 does not go away on its own and needs attention.

Can I drive with code P0301?

Driving a vehicle in the presence of this error, although possible, is highly discouraged, as the car may stop while driving.

How much does it cost to fix code P0301?

On average, the cost of replacing spark plugs and coils in a workshop is around 50-60 euros.

Misfiring Engines With P0301 Code

Need more help with your p0301 code?

If you still need help with DTC P0301, post a question in the comments below this article.

NOTE. This information is provided for informational purposes only. It is not intended to be used as a repair recommendation and we are not responsible for any action you take on any vehicle. All information on this site is protected by copyright.

2 comment

  • Nikola cls

    mercedes cls 350 2004, ix gives me misfire cylinder 1 and cylinder 4 on diagnostics, changed the coil, spark plug, checked all the wires, changed the crankshaft sensor and still does not ignite the spark on the first and fourth piston, any help is welcome, thank you

  • nissy

    Ford edge code p0301 is taking my head seriously I changed all the spark plugs I changed a new engine this misfire code is taking my head seriously

Add a comment