P0317 Equipment for rough road missing
OBD2 Error Codes

P0317 Equipment for rough road missing

20.09.2023 /

P0317 – Technical description of the OBD-II fault code

There is no equipment for rough roads

What does trouble code P0317 mean?

Trouble code P0317 applies to vehicles of various makes and models equipped with an OBD-II system (VW, Ford, Audi, Buick, GM and others). It's important to note that the specific diagnostic and repair steps may vary depending on the vehicle manufacturer.

This P0317 code is classified as an ignition system related code. Its appearance is usually associated with sensors that can interpret engine crankshaft vibrations as abnormal. These vibrations can occur when driving on rough roads or off-road conditions, and the sensors may send incorrect signals to the engine control module (PCM).

Different vehicles may use different methods to detect rough road conditions. This may include road sensors, accelerometers, and the use of ABS sensors and electronic brake control modules (EBCM).

If the P0317 code occurs, it is recommended that you contact certified service centers or technicians who are familiar with the make of your vehicle. They have the experience and knowledge needed to accurately diagnose and fix the problem. Remember that this code usually only sets after a few cycles of error, so it is important to diagnose and resolve it as soon as possible.

Possible reasons

Code P0317 can occur due to a faulty crankshaft position sensor and can be associated with various reasons:

  1. Worn or damaged timing chain teeth.
  2. Loose crankshaft pulley bolt.
  3. Relationship between the crankshaft position sensor and other sensors.
  4. Malfunction of the crankshaft position sensor.
  5. Faulty or disabled road conditions sensors.
  6. There is a problem with the wiring or electrical system associated with the sensors.
  7. The control unit may require initialization of a new road conditions sensor.

When the P0317 code appears, it is recommended to conduct a detailed diagnosis using specialized equipment and contact a professional to determine the specific cause and eliminate it.

What are the symptoms of trouble code P0317?

The P0317 code causes the Check Engine light on the instrument panel to illuminate and may include the following symptoms:

  1. Rough idle.
  2. Lack of power at high speeds.
  3. Engine stop.
  4. Unstable power at different speeds.
  5. Excessive black smoke from the exhaust pipe.
  6. Crankshaft mismatch.

It is important to note that while most trouble codes will activate the Check Engine Light (MIL), the P0317 code will not illuminate the check engine light. However, other problems may occur, such as running warning lights (such as traction control or ABS) or problems starting and running the engine.

How to diagnose trouble code P0317?

Diagnosing the P0317 error requires a specialized diagnostic tool that can read sensor data. A qualified technician can use this tool to determine when the problem occurred and its current status. After reading the data, the technician can reset the code and do a test drive to see if the error returns.

Depending on the test results and other diagnostic conditions, the following actions may be required:

  1. Replacing the crankshaft position sensor.
  2. Replacing the timing chain or engine gears.
  3. Changing the position of the camshaft drive chain or gears.
  4. Check for foreign objects around the crankshaft position sensor.
  5. Check all other transmission components.

Please also note that error codes may not be displayed all the time, which may make them difficult to diagnose. In this case, a visual inspection may be required to identify factors interfering with the transmission of signals between the sensors. If you find damage to these components, replace them as soon as possible.

It's a good practice to check for technical service bulletins (TSBs) associated with your vehicle year and model. If the problem is known to the manufacturer, there may be a bulletin available to help diagnose and resolve the problem. This can save time and money.

You should also pay attention to other error codes, such as misfires or ABS errors, and consider troubleshooting them before solving the P0317 problem. Freeze frame data should be recorded as it may be useful for further diagnosis. If your vehicle has an accelerometer sensor, check its condition, wiring, and connectors for problems. Make repairs if necessary. Next, use a digital voltmeter (DVOM) to check continuity, resistance, and other electrical characteristics according to the manufacturer's instructions.

If possible, use the scan tool for a test drive on rough roads and monitor sensor readings related to road conditions to determine if the problem can be recreated and narrowed down.

Diagnostic errors

The P0317 code can be caused by a faulty crankshaft position sensor or nearby factors such as a worn timing chain or problems with other sensors. An accurate diagnosis requires a specialized diagnostic tool, and a qualified technician can use one to read the data and determine the cause of the error. Inspection of sensor-related components may also be necessary, and if damage is found, they should be replaced. Please note that error codes may not appear all the time, so diagnosis may require careful monitoring and test drives. It is recommended that you check for technical service bulletins associated with your vehicle and resolve any other errors before resolving the P0317 problem.

How serious is trouble code P0317?

Trouble code P0317 is relatively serious as it can cause problems with idle speed, engine power, and vehicle stability on the road. Although this is not an immediate problem, it is recommended that it be diagnosed and repaired as soon as possible to avoid further hassle and damage to the ignition system.

What repairs will resolve the P0317 code?

The most common repair options to resolve the P0317 code include:

  1. Replacing the crankshaft position sensor.
  2. Rearrangement of the camshaft drive chain/gears.
  3. Clean the surroundings of the crankshaft position sensor from foreign objects.
  4. Checking all transmission components.

In some situations, a road test will be necessary to determine the best course of action. In other cases, if this is not possible, a visual inspection may be required.

Although the P0317 code can be difficult to repair and does not guarantee a failure, replacing a faulty road sensor may be one of the reasons for its occurrence. Knowing the conditions in which your vehicle is typically used and what factors may affect these components can help identify potential problems before they affect engine performance or have trouble starting the vehicle.

A qualified technician should recommend repairs based on diagnostic results, but do not ignore the check engine light without checking for problems.

P0317 – Brand Specific Information

Trouble code P0317 usually has the same meaning for most vehicles of different brands. It indicates a problem with the crankshaft position sensor and may affect engine performance. Here's what this could mean for seven popular car brands:

  1. Toyota: Code P0317 may indicate a faulty crankshaft sensor, which can cause the engine to run rough or lose power.
  2. Ford: For Ford vehicles, this is also related to the crankshaft sensor and can cause problems with idle or rough power.
  3. Chevrolet: Chevrolet vehicles may also experience the same problem, which requires attention to the crankshaft sensor and can cause a misfire.
  4. Honda: Code P0317 on Honda vehicles indicates a similar situation with the crankshaft sensor, which can cause the engine to run rough and cause poor performance.
  5. Nissan: In the case of Nissan, this is also related to the crankshaft sensor and can cause idle and power issues.
  6. Volkswagen: Volkswagen vehicles may have similar problems with the crankshaft sensor, which will affect engine performance and idle speed.
  7. Hyundai: Code P0317 on Hyundai vehicles also indicates problems with the crankshaft sensor, which can cause the engine to run rough.

The general meaning of the P0317 code remains similar for most brands, but specific repair and diagnostic recommendations may vary slightly depending on the manufacturer.

What is P0317 Engine Code [Quick Guide]

Related codes

The P0317 code may be accompanied by other trouble codes, including:

If you have P0317 and one of these other codes, the problem is most likely related to the camshaft or crankshaft sensors. If your code is different, it may be due to a faulty road sensor.

Add a comment