P0583 Low signal level in the cruise control vacuum control circuit

Content

P0583 – OBD-II Trouble Code Technical Description
What does trouble code P0583 mean?
Possible reasons
What are the symptoms of trouble code P0583?
How to diagnose trouble code P0583?
- Diagnostic errors
How serious is trouble code P0583?
What repairs will resolve the P0583 code?
P0583 – Brand Specific Information

P0583 – OBD-II Trouble Code Technical Description

Cruise control vacuum control circuit low

What does the fault code mean P0583?

OBD-II code P0583 indicates a low signal in the cruise control vacuum control circuit. This code, although not a critical fault, is important for the correct operation of the cruise control on your vehicle. When P0583 occurs, consider the following:

Cruise control status: This is usually the only problem with this code. Your cruise control may stop functioning.
The Importance of Repair: Even though this is a minor malfunction, repairs should still be made. It's important to note that improperly functioning cruise control can result in poor performance on emissions tests, which can make it more difficult to pass inspection.
Diagnostics and Repair: To troubleshoot P0583, it is recommended that you start by inspecting and servicing all cruise control-related wiring and components, including switches and wires. If this does not solve the problem, then a more in-depth diagnosis and, if necessary, replacement of faulty components may be required.
Code Cleanup: After repairs and troubleshooting, it is important to clear the P0583 code using an OBD-II scanner/reader.
The test is: After repair, it is worth testing the operation of the cruise control again to ensure that it is functioning correctly and the code is not activated again.
Professional Help: If the problem persists after a series of repairs, it is recommended that you contact a professional mechanic or service center for a more in-depth diagnosis and solution to the problem.
Prevention: To prevent this and other problems from occurring, your vehicle's cruise control system should be regularly serviced and inspected.

Possible reasons

Possible causes of a P0583 code in the cruise control system include:

Faulty cruise control system component: First of all, you should check the condition of all components of this system, including the switches and servo drive.
Cracked or damaged vacuum hose: This code may occur due to a leak in the vacuum system, which may be caused by a cracked or damaged vacuum hose.
Faulty cruise control servo or fuses: A damaged or faulty cruise control servo, as well as blown fuses, can lead to this problem.
Wiring problems: Broken, disconnected, faulty, corroded or disconnected wiring in the cruise control system can cause code P0583.
Mechanical obstacles: In some cases, mechanical obstructions within the operating range of the cruise control servo may trigger this code.
Problems with ECM (Engine Control Module): Faults in the engine control module itself can also affect the operation of the cruise control system.
Problems with the vacuum system: Leaks or problems in the engine vacuum system can affect the operation of the cruise control.
Connector problems: It is important to check the condition of the connectors, including pins and insulation, as problems with the connectors can cause a P0583 code.

The solution to the problem depends on the specific cause, and diagnostics are carried out to identify and eliminate the problem.

What are the symptoms of a fault code? P0583?

Symptoms of a P0583 diagnostic code may include:

Cruise control not working.
The CEL (check engine) light comes on.
Incorrect operation of some cruise control functions such as speed setting, resume, acceleration, etc.
The vehicle speed is unstable even if the cruise control is set to a certain speed.
The cruise control light on the instrument cluster is constantly on.
Failure of one or more cruise control functions.
Perhaps the appearance of whistling sounds from the engine compartment.

This P0583 code will disable the vehicle's cruise control function. However, it is often accompanied by other codes, which can have more serious consequences for the vehicle. The on-board computer stores this code for diagnostic purposes and turns on a malfunction indicator on the instrument panel to alert the driver to the problem.

How to diagnose a fault code P0583?

The P0583 code can first be identified using an OBD-II scanner, which connects to the vehicle's computer and reports possible problems.

The wiring associated with the cruise control system should be carefully inspected for signs of damage, wear, or corrosion.

It is also worth paying attention to the condition of the vacuum supply hose and one-way check valve, looking for cracks and vacuum losses, which can be done by passing smoke through the system and visually detecting leaks.

For cruise control related control modules (including the PCM), they should be disconnected to check the circuit resistance.

Be sure to check the Technical Service Bulletins (TSB) for your specific vehicle make and model, as this may alert you to known problems. Additional diagnostic steps will vary depending on your vehicle and may require specific equipment and knowledge.

Basic steps:

Open the hood and inspect the cruise control system. Check the vacuum lines, solenoids, and cruise control servo for physical damage. Repair or replace if faults are obvious.
If you have a cruise control vacuum solenoid, check its electrical parameters according to your service manual. Replace the solenoid if the measured values are not within the specified parameters.
Monitor system vacuum, especially from certain ports in the intake system. The correct vacuum value, depending on the temperature and ignition timing, should be in the range of 50-55 kPa.

By following these steps, you can begin the process of troubleshooting the P0583 code in your vehicle's cruise control system.

Diagnostic errors

When diagnosing a P0583 code, some common errors are quite common. For example, components related to the cruise control system are sometimes replaced inappropriately due to unchecked fuses that may be blown. Technicians also note that the cruise control servo is often mistakenly suspected of being faulty due to problems with the one-way check valve. This highlights the importance of thoroughly diagnosing and checking all items associated with the P0583 code to avoid unnecessary replacements and repairs.

How serious is the fault code? P0583?

Regarding severity, code P0583 is usually limited to cruise control operation. It should not in itself seriously affect the normal operation of the vehicle. However, it is important to note that this code is often accompanied by other trouble codes that can cause additional problems for your vehicle. Therefore, it is recommended to carefully diagnose and repair to avoid a cascade of problems.

What repair will help eliminate the code? P0583?

To resolve the P0583 code, you must first carefully inspect and, if necessary, repair or replace damaged wiring and components. After repairs, repeat tests should be carried out to evaluate voltage levels and ensure that they have significantly improved.

If the cruise control switches are found to be faulty, they should also be replaced as needed. After replacing components, the system should be tested again to ensure that the P0583 code has been successfully resolved.

What is P0583 Engine Code [Quick Guide]