P0752 Shift solenoid valve A stuck on

P0752 – OBD-II Trouble Code Technical Description

Trouble code P0752 indicates that the PCM has detected a problem with the shift solenoid valve A stuck in the on position.

What does the fault code mean P0752?

Trouble code P0752 indicates that the engine/transmission control module (PCM) has detected a problem with the shift solenoid valve “A” being stuck in the on position. This means that the car may have difficulty shifting gears and may not be able to adjust the gear ratio correctly. The appearance of this error means that the car is not able to shift gears properly. In vehicles with a computer-controlled automatic transmission, shift solenoid valves are used to control the movement of fluid between hydraulic circuits and to adjust or change the gear ratio.

Possible reasons

Some possible reasons for the P0752 trouble code:

• Shift solenoid valve “A” is damaged or worn.
• Incorrect voltage at shift solenoid valve “A”.
• An open or short circuit in the electrical circuit connecting the PCM to the solenoid valve.
• Problems with the PCM itself, causing signals from the valve to be misinterpreted.
• Malfunction of other transmission components that affects shift solenoid valve “A”, such as solenoids or sensors.

These reasons may be based on physical damage, electrical failures, or problems with other components of the transmission control system.

What are the symptoms of a fault code? P0752?

Chat GPT

Chat GPT

Here are some possible symptoms when trouble code P0752 appears:

1. Shifting Problems: The vehicle may have difficulty shifting gears or may not shift into certain gears at all.
2. Incorrect Gear Shifts: If there is a problem with the shift solenoid valve “A,” the vehicle may shift gears randomly or shift into the wrong gears.
3. Increased fuel consumption: Incorrect gear changes can result in increased fuel consumption due to improper use of gears.
4. Jerking or jolting when shifting gears: The vehicle may jerk or jolt when shifting gears due to improper transmission operation.

These symptoms may occur to varying degrees depending on the specific problem and the condition of the vehicle.

How to diagnose a fault code P0752?

To diagnose DTC P0752, follow these steps:

1. Error checking: Using an OBD-II scanner, read the error codes and verify that the P0752 code is indeed present.
2. Visual inspection: Check the electrical connections, wires and connectors associated with the shift solenoid valve “A”. Make sure that all connections are securely fastened and there is no damage.
3. Checking the transmission fluid level: Make sure the transmission fluid level and condition are within the manufacturer's recommendations.
4. Solenoid Valve Testing: Test the shift solenoid valve “A” using a multimeter or specialized tool to check resistance and operation.
5. Checking the internal condition of the transmission: If other symptoms of transmission trouble are present, it may be necessary to inspect the internal components of the transmission for damage or wear.
6. Software check: If necessary, update the PCM software to correct possible programming problems.
7. Additional tests: If necessary, perform other diagnostic tests as recommended by the vehicle manufacturer or service technician.

After diagnosing and identifying the cause of the malfunction, it is recommended to carry out the necessary repairs or replace components. If you are unsure of your skills or experience, it is best to contact a qualified technician or auto mechanic for diagnosis and repair.

Diagnostic errors

When diagnosing DTC P0752, the following errors may occur:

1. Incorrect interpretation of code: The error may involve misinterpretation of the code or its symptoms, which may lead to misdiagnosis and unnecessary repair work.
2. Skipping a visual inspection: Failure to visually inspect electrical connections, wires and connectors may result in damage or malfunctions being missed.
3. Non-compliance with manufacturer's recommendations: Failure to follow the manufacturer's recommendations for diagnosis or repair may result in incorrect operation and additional problems.
4. Ignoring other symptoms: Ignoring other symptoms of a faulty transmission or other vehicle components may result in incorrect diagnosis and repair.
5. Need for special equipmentNote: Some tests or diagnostic procedures may require special equipment or tools that may not be available to the average vehicle owner.
6. Incorrect interpretation of test results: Incorrect interpretation of test results on the solenoid valve or other transmission components may lead to incorrect conclusions about the cause of the problem.

It is important to ensure that the diagnostics are carried out correctly, carefully analyze the results and, if necessary, seek help from professionals with experience in car diagnostics and repair.

How serious is the fault code? P0752?

Trouble code P0752 indicates a problem with the shift solenoid valve. Although this is not a critical fault, it can cause serious problems with the functioning of the vehicle. If the valve is stuck in the on position, the vehicle may have difficulty shifting gears, which can lead to poor driving dynamics, increased fuel consumption and damage to transmission components. Therefore, although this code is not critical, it is recommended that you take steps to repair it as soon as possible to avoid further problems with your vehicle.

What repair will help eliminate the code? P0752?

To resolve DTC P0752, the following steps are recommended:

1. Solenoid Valve Replacement: Since the problem is the solenoid valve sticking when on, it will likely need to be replaced. The faulty valve must be removed and a new, working one installed in its place.
2. Checking the electrical circuit: The cause may be a malfunction in the electrical circuit that supplies the control signal to the solenoid valve. Check the integrity of wires, connections and electrical connectors, and ensure that the power supply is correct.
3. Transmission Diagnostics: After replacing a valve or checking the electrical circuit, it is recommended to diagnose the transmission to ensure that there are no other problems affecting gear shifting.
4. Error reset and testing: After repairs are completed, you must reset the error codes using a diagnostic scanner and test the vehicle for repeated errors.

If you are not experienced in car repairs, it is recommended that you contact a professional mechanic or auto repair shop to perform this work.

How to Diagnose and Fix P0752 Engine Code - OBD II Trouble Code Explain

P0752 – Brand-specific information

Trouble code P0752 refers to the shift solenoid valve “A” and may be used for some specific vehicle brands:

• Ford: Shift Solenoid A Stuck On.
• Chevrolet / GMC: 1-2 Shift Solenoid Valve Performance - No First or Fourth Gear.
• Toyota: Shift Solenoid “A” Performance.
• Honda/Acura: Shift Solenoid Valve A Stuck On.
• Nissan/Infiniti: Shift Solenoid Valve A Stuck On.

These are just some of the possible decodings for specific car brands. The code may vary slightly depending on the manufacturer and model of the vehicle. If you have a specific make and model you need information for, please inquire and I will provide the appropriate breakdown.