P0917 - Shift Lever Position Circuit High

P0917 – OBD-II Trouble Code Technical Description

Shift Lever Position Circuit High

What does the fault code mean P0917?

See the flashing code P0917? Well, we have everything you need to crack the code. OBD-II error code P0917 indicates a high signal level in the gear shift circuit. When the PCM receives an incorrect signal from the shift position sensor, a P0917 code is stored. This common trouble code indicates an electrical problem in the transmission shift position circuit.

Possible reasons

Trouble code P0917 is usually caused by damaged or malfunctioning electrical components of the shift positioning system. These could be shorted wires, corroded connectors, or blown fuses. Other potential causes of the code are a short to positive in the battery and a faulty PCM.

What are the symptoms of a fault code? P0917?

It is essential to know the symptoms of the problem in order to detect it. Let's shed some light on a few common symptoms of OBD error code P0917.

Symptoms of P0917 include:

1. Sharp gear shifting.
2. Unstable transmission behavior.
3. Shifting gears takes longer than usual.
4. The gearbox refuses to engage a gear.

How to diagnose a fault code P0917?

Here are a few steps to follow to diagnose this DTC:

1. Use a standard OBD-II trouble code scanner to view and save freeze frame data for the P0917 code. Also check for any stored additional codes and take them into account when diagnosing.
2. Check the electrical components of the transmission system for corroded, disconnected or damaged wiring, connectors or fuses. Replace or repair them if necessary.
3. Check for possible short circuit to battery positive and repair it if found.
4. Perform a thorough check of the shift position, including the sensors, as well as the engine control module (PCM), if necessary.

After completing the above steps, it is recommended to reset the code and retest the vehicle to determine if the P0917 code returns. This will help the mechanic know if the problem has been resolved or if further investigation is required.

Diagnostic errors

Trouble code P0917 indicates a high signal problem in the shift circuit, which can cause the transmission to malfunction and limit vehicle functionality. The severity of this error depends on the specific circumstances:

1. Improper gear shifting can lead to dangerous driving situations and increase the risk of accidents.
2. Limiting the vehicle's speed and maneuverability can make driving difficult.
3. Damage to the transmission system in the long term if the problem is not corrected can lead to expensive repairs and increased costs.

Due to the potential danger and possible damage, it is recommended that you contact a car service specialist to diagnose and correct the error as soon as possible.

How serious is the fault code? P0917?

Trouble code P0917 indicates a high signal problem in the shift circuit, which can lead to significant transmission problems. This can result in improper gear shifting, limited speed, and poor overall vehicle functionality. Although this may not cause immediate danger, it is recommended that you contact qualified technicians for diagnosis and repair immediately to prevent further deterioration of the vehicle.

What repair will help eliminate the code? P0917?

The following repairs may be required to resolve DTC P0917:

1. Check and possibly replace the gear shift position sensor if it is found faulty.
2. Check and repair any damaged wires or electrical connections in the shift position sensor circuit.
3. Check for corroded connectors or wires and replace them if necessary.
4. Repair or replace the transmission control module (TCM) if found to be faulty.
5. Calibrate or re-calibrate the sensor and transmission system to ensure proper operation and to factory specifications.

To accurately troubleshoot the P0917 problem and prevent it from recurring, it is recommended that you contact a professional auto technician or auto repair shop who has experience working with transmission systems and can service your specific type of vehicle.

What is P0917 Engine Code [Quick Guide]

P0917 – Brand-specific information

The P0917 code may have different meanings depending on the specific make and model of the vehicle. Here are some P0917 definitions for some well-known brands:

1. BMW: P0917 – Transmission Fluid Pressure Sensor/Switch “H” Circuit Low
2. Toyota: P0917 – Transmission Fluid Pressure Sensor/Switch “H” Circuit Low
3. Ford: P0917 – Transmission Fluid Pressure Sensor/Switch “H” Circuit Low
4. Mercedes-Benz: P0917 – Transmission Fluid Pressure Sensor/Switch “H” Circuit Low
5. Honda: P0917 – Transmission Fluid Pressure Sensor/Switch “H” Circuit Low

For more accurate information about the specific brand of your vehicle, it is recommended that you consult the official manuals or service books specific to your vehicle.