P0958: Automatic Manual Shift Circuit High

P0958 – OBD-II Trouble Code Technical Description

High signal level in the automatic gear shift circuit in manual mode

What does the fault code mean P0958?

Manual gear shift function provided by +/- switch | The up/down valve on the gearshift lever (or paddle shifters/steering wheel buttons) is made possible by the synergy of several key components within the transmission system. These components include the automatic transmission/shift switch, mode actuator, and associated wires and connectors.

When an abnormal event in the form of unusually high voltage occurs within this complex data circuit, the electronic control unit (ECU) records the incident and stores the corresponding trouble code, in this case, P0958. This code serves as a signal of possible problems in the operation of the manual gear shift system and warns of the need for additional diagnostics and repairs.

Possible reasons

Trouble code P0958 indicates a high signal in the automatic transmission manual mode circuit. Possible causes for this code may include the following:

1. Shifter/Lever Problems: Mechanical damage, corrosion or breaks in the wires connecting the switch or gear lever to the transmission control system.
2. Faulty electrical connections: Wiring problems, including opens, shorts, or corrosion in the electrical connections between the shifter/shifter and the transmission control module (TCM).
3. Automatic gear shift switch malfunction: If your vehicle is equipped with a separate switch between automatic and manual modes, problems with this switch may cause trouble code P0958.
4. Problems with the mode actuator: Defects in the mechanism that actually performs manual gear shifting can result in high signal levels.
5. TCM malfunction: Problems with the transmission control module, which receives signals from the switch, can cause P0958.
6. Problems with wiring inside the gearbox: If the signal is transmitted through internal wires in the transmission, problems such as opens or short circuits may occur.
7. TCM software problems: Errors in the TCM software can interfere with the correct perception of signals and cause the P0958 code.
8. Problems with valves inside the transmission: Internal problems with the valves in the transmission can affect the correct operation of the manual shift system.

It is important to note that in order to accurately identify and eliminate the problem, it is recommended to conduct detailed diagnostics using specialized equipment.

What are the symptoms of a fault code? P0958?

Symptoms associated with DTC P0958 can vary depending on the specific cause and nature of the problem. Here are some possible symptoms that may accompany this code:

1. Gearshift problems: One of the most obvious symptoms is difficulty or inability to shift gears into manual mode. This may manifest itself as lag, jerking, or improper shifting.
2. Faulty gear mode indication: The manual mode indicator on the instrument panel may blink, display incorrect information about the currently selected gear, or may not function at all.
3. Inactive manual mode: The driver may have difficulty activating the manual transmission mode, even when using the appropriate switch or lever.
4. Check Engine Indicator: An illuminated Check Engine light on your dashboard may be one of the first signs of a problem.
5. Limited manual functions: If P0958 is detected, the automatic transmission may enter a limited operating mode, which can affect the overall performance of the vehicle.

It is important to note that these symptoms may occur to varying degrees depending on the make and model of the vehicle. If you experience these symptoms or your Check Engine Light comes on, it is recommended that you take it to a professional auto mechanic to diagnose and repair the problem.

How to diagnose a fault code P0958?

Diagnosing trouble code P0958 requires a systematic approach and the use of specialized equipment. Here are the steps you can take to identify and resolve the problem:

1. Scan DTCs: Use an OBD-II scanner to read trouble codes, including P0958. This will help you determine the exact location and nature of the problem.
2. Checking wiring and connectors: Carefully check the wiring and connectors between the shifter/lever and the transmission control module (TCM). Pay attention to possible breaks, short circuits or damage to the wires.
3. Checking the shifter/lever: Assess the condition of the switch or gear lever itself. Make sure it sends signals correctly to the TCM every time it moves up or down.
4. Checking the mode actuator: Check the mode actuator that actually shifts into manual mode. Make sure it is in good working order and moves freely.
5. TCM check: Assess the condition of the transmission control module. Check its connections and make sure there is no physical damage. Perform tests using diagnostic equipment to evaluate its performance.
6. Real world testing: If possible, perform a test drive to check the transmission's performance in various modes.
7. Software update: Check for software updates for your TCM as sometimes problems can be software related.
8. Checking the valves in the transmission: If all of the above components are good, there may be a problem with the valves inside the transmission. This may require more in-depth diagnostics, possibly using additional equipment.
9. Checking sensors in the transmission: Evaluate the performance of sensors in the transmission, such as the shift lever position sensor. Errors in their operation can lead to the appearance of code P0958.

Let me remind you that diagnosing a transmission may require specialized equipment, and to more accurately determine and fix the problem, it is recommended that you contact a professional auto mechanic or auto repair shop.

Diagnostic errors

When diagnosing a car, various errors may occur that make it difficult or may lead to incorrect conclusions. Here are some common errors that may occur during diagnosis:

1. Insufficient check of all systems: A mechanic may miss important systems or components when diagnosing, causing the underlying problem to be missed.
2. Insufficient attention to fault codes: Errors can occur due to misinterpretation or lack of attention to trouble codes missed by the scanner.
3. Replacement of components without additional diagnostics: A mechanic may quickly suggest replacement parts without ever performing a deeper diagnosis, which can result in unnecessary costs.
4. Ignoring preliminary information from the owner: The mechanic may miss important information about symptoms that the vehicle owner may have provided before the diagnosis began.
5. Failure to use specialized equipment: The lack of necessary equipment may lead to the inability to carry out full diagnostics, especially for modern cars with advanced electronic systems.
6. Insufficient field testing: Diagnostics performed only while parked may miss problems that only appear while driving or under varying driving conditions.
7. Ignoring electrical problems: Problems with the electrical system can be difficult to identify and may be underestimated by the mechanic by focusing on the mechanical aspects.
8. Failure to take into account the interaction of various systems: Some mechanics may focus on just one system, ignoring interactions with other vehicle components.
9. Ignoring owner feedback: Insufficient owner feedback may result in missing important details that may aid in diagnosis.
10. Incorrect application of technical data: Incorrect use of technical data or misinterpretations of specifications may lead to incorrect conclusions.

To prevent these errors, it is important to take a systematic and careful approach to diagnosis, using all available data and feedback from the vehicle owner.

How serious is the fault code? P0958?

Trouble code P0958 indicates problems with the manual shift system. The impact of this malfunction on vehicle safety and performance may vary depending on the individual circumstances and the nature of the malfunction. Here are a few aspects to consider:

1. Gearshift problems: If the P0958 code causes difficulty or inability to shift into manual mode, it may cause driver discomfort and affect the overall handling of the vehicle.
2. Limited manual functions: If the manual shift system fails, it can limit the functionality of the automatic transmission, affecting transmission control options.
3. Possible transmission problems: Shifting incorrectly can cause wear and damage to the transmission, which may ultimately require more extensive repairs.
4. Potential security issues: If a problem makes the vehicle difficult to drive or causes the transmission to behave unpredictably, it could pose a potential safety hazard.
5. Possibility of the vehicle going into limp mode: Some vehicles can automatically enter a limp mode when they detect serious problems to prevent further damage.

Overall, while P0958 itself may not pose an immediate threat to life, it is important to consider the potential implications for vehicle reliability and safety. It is recommended to diagnose and repair the malfunction as soon as possible in order to prevent possible problems and ensure normal operation of the vehicle.

What repair will help eliminate the code? P0958?

Troubleshooting the P0958 trouble code may vary depending on the specific cause of the trouble. Here are some general steps you can take to resolve the problem:

1. Checking and replacing the gear switch/lever: If a shifter or gear lever is the source of the problem, it should be checked for proper operation and replaced if necessary.
2. Checking and restoring electrical wiring: Carefully check the wiring and connectors between the shifter/shifter and the transmission control module (TCM). Replace or repair damaged wires and connectors.
3. Checking and replacing the mode actuator: If the mode actuator (the mechanism that shifts gears into manual mode) is faulty, consider replacing it.
4. Checking and updating TCM software: In some cases, problems with the P0958 code may be related to the transmission control module software. Check for software updates and update if necessary.
5. Diagnostics and replacement of valves in the transmission: If the problems are with the valves inside the transmission, you may need to do more in-depth diagnostics and replace parts inside the transmission.

It is important to note that in order to accurately identify and eliminate the problem, as well as to carry out repair work, it is recommended to contact a professional auto mechanic or car service center. An expert will be able to conduct more accurate diagnostics using specialized equipment and determine the required amount of repair work.

What is P0958 Engine Code [Quick Guide]