P0975: Shift Solenoid Valve "B" Control Circuit Trouble Code Range/Performance
OBD2 Error Codes

P0975: Shift Solenoid Valve "B" Control Circuit Trouble Code Range/Performance

13.11.2023 /

P0975 – OBD-II Trouble Code Technical Description

Shift Solenoid Valve "B" Control Circuit Malfunction Range/Performance

What does the fault code mean P0975?

Trouble code P0975 indicates problems with the shift solenoid valve “B”. Each solenoid valve in the transmission is responsible for shifting a specific gear. In this context, “B” indicates a specific valve in the system.

The specific decoding of the P0975 code is as follows:

P0975: Shift Solenoid Valve “B” – Signal Low

This means that the transmission control module (TCM) has detected that the signal from the “B” solenoid valve is below the expected level. A low signal level can indicate various problems, such as a break in the wiring, a malfunction of the valve itself, or problems with the transmission control unit.

Possible reasons

Trouble code P0975 indicates problems with the transmission shift solenoid valve “B”. Possible causes for this code may include:

  1. Solenoid valve “B” malfunction:
    • The valve itself may be damaged or faulty. This may be caused by corrosion, wear, or other mechanical problems.
  2. Problems with wiring and connectors:
    • Breaks, corrosion, or poor connections in the wiring to solenoid valve “B” can cause the signal level to decrease.
  3. Transmission control module (TCM) problems:
    • Faults in the transmission control module, which controls the operation of the solenoid valves, can cause a low signal level.
  4. Power problems:
    • Insufficient power supply to solenoid valve “B” may cause problems with its operation.
  5. Transmission fluid problems:
    • Insufficient transmission fluid levels or contamination can also affect the operation of the solenoid valve and lead to code P0975.

To accurately identify and eliminate the cause of the P0975 code, it is recommended to conduct a detailed diagnosis using diagnostic equipment and tools at an auto repair shop or a qualified auto mechanic.

What are the symptoms of a fault code? P0975?

Symptoms for a P0975 trouble code can vary depending on the specific problem and vehicle type, but they typically include the following:

  1. Gearshift problems:
    • One of the most obvious symptoms is difficult or incorrect gear shifting. This may include delays, jerks, or no shifting at all.
  2. Increased fuel consumption:
    • Improper gear shifting can affect engine efficiency and lead to increased fuel consumption.
  3. Turning on the Check Engine Light:
    • An illuminated Check Engine (check system) light on your dashboard may be the first sign of a problem.
  4. Emergency operation:
    • In some cases, the vehicle may go into limp mode, limiting functionality to prevent possible damage.
  5. Unusual sounds or vibrations:
    • Transmission problems may cause unusual sounds or vibrations when driving.
  6. Lack of response to speed changes:
    • The vehicle may not respond to acceleration or deceleration as required by the driver.

If you notice any of these symptoms or your check engine light comes on, it is recommended that you immediately contact a qualified auto mechanic to diagnose and repair the problem.

How to diagnose a fault code P0975?

Diagnosing the P0975 trouble code involves a series of steps to identify and resolve the root cause. Here are the general steps you can take:

  1. Using the diagnostic scanner:
    • Connect a diagnostic scan tool to your vehicle's OBD-II (On-Board Diagnostics) port to read trouble codes and obtain additional information about transmission parameters.
  2. Checking additional fault codes:
    • Check for other trouble codes that may further indicate problems with the system.
  3. Checking the transmission fluid level:
    • Make sure the transmission fluid level is within the manufacturer's recommendations. Low or contaminated fluid levels can affect transmission performance.
  4. Checking wiring and connectors:
    • Carefully inspect the wiring and connectors associated with the “B” solenoid valve. Look for possible breaks, corrosion or damage.
  5. Checking solenoid valve “B”:
    • Perform performance tests on solenoid valve “B”. This may include measuring resistance and checking how it responds to control commands.
  6. Transmission control module (TCM) diagnostics:
    • If necessary, conduct a thorough diagnosis of the transmission control unit that may be causing the problem.
  7. Checking sensor signals:
    • Check the gear shift related sensors to ensure they are functioning correctly.
  8. Consultation with professionals:
    • In case of complex problems or if the cause cannot be identified, it is recommended to contact a professional auto mechanic or auto repair shop for a more detailed diagnosis.

Diagnosing P0975 may require specialized tools and experience, so if you are unsure of your skills, it is recommended that you contact a professional to more accurately identify and resolve the problem.

Diagnostic errors

When diagnosing the P0975 trouble code, some common errors may occur. Here are a few of them:

  1. Incomplete solenoid valve testing:
    • Some technicians may skip a full test of the “B” solenoid valve, which may result in underestimating its condition.
  2. Unaccounted for additional fault codes:
    • Sometimes problems in the transmission system can cause multiple fault codes. Failure to fully detect all codes may result in missing important information.
  3. Skipped wiring and connector check:
    • Failure to pay sufficient attention to the condition of the wiring and connectors associated with the “B” solenoid valve may result in undiagnosed problems.
  4. Unaccounted for problems with the transmission control unit:
    • The transmission control module (TCM) can also cause problems. Missing diagnosis of this component may result in an incorrect diagnosis of the cause.
  5. Incorrect reading of data from sensors:
    • Incorrect reading of data from sensors that affect the operation of the transmission can lead to erroneous determination of the causes of the malfunction.
  6. Ignoring transmission fluid level:
    • Insufficient attention to the level and condition of the transmission fluid can lead to overlooking problems associated with its quality and quantity.
  7. Unaccounted for mechanical problems:
    • Some mechanical transmission problems, such as worn clutches or gears, may be missed when diagnosing electrical components.

To avoid these errors, it is important to perform a thorough and comprehensive diagnosis, including checking all associated components and conducting full testing. If necessary, contact professionals for more accurate diagnosis and elimination of the problem.

How serious is the fault code? P0975?

Trouble code P0975 indicates problems with the transmission shift solenoid valve “B”. The severity of this problem depends on several factors, including the specific symptoms you notice and the type of car you have.

Possible consequences and severity of the problem may include:

  1. Gearshift problems:
    • One of the most obvious consequences is incorrect or difficult gear shifting. This may affect vehicle handling and driving safety.
  2. Loss of efficiency and increased fuel consumption:
    • An improperly functioning transmission can result in increased fuel consumption and reduced overall vehicle performance.
  3. Possible transmission damage:
    • Failure to properly diagnose and repair a problem with the “B” solenoid valve can result in additional damage to the transmission.
  4. Emergency operation:
    • In some cases, the vehicle may go into limp mode, limiting functionality to prevent possible damage.
  5. Additional costs for fuel and repairs:
    • Transmission malfunction can result in increased fuel and repair costs if the problem is not corrected in a timely manner.

To minimize the consequences and eliminate the problem, it is recommended to carry out detailed diagnostics and repairs as soon as possible after the P0975 trouble code appears. Contact a professional to more accurately identify and fix the problem.

What repair will help eliminate the code? P0975?

Troubleshooting DTC P0975 may require different actions depending on the identified cause. Here are some possible repair actions:

  1. Replacing or repairing solenoid valve “B”:
    • If tests show that solenoid valve “B” is faulty, it can be replaced. In some cases, if a mechanical problem is found, repairs may be possible.
  2. Checking and restoring wiring and connectors:
    • The wiring and connectors associated with the “B” solenoid valve should be carefully inspected for breaks, corrosion, or other damage. If necessary, repair or replace the wiring.
  3. Diagnostics and, if necessary, repair of the transmission control unit (TCM):
    • If problems are identified with the transmission control unit, it may need to be diagnosed and repaired.
  4. Checking and servicing transmission fluid:
    • Check the level and condition of the transmission fluid. It may need to be topped up or replaced. Clean and properly leveled transmission fluid is important for proper transmission operation.
  5. Checking and replacing sensors:
    • Perform tests on sensors that affect transmission performance. If necessary, replace faulty sensors.
  6. Additional diagnostics and repair of mechanical parts of the transmission:
    • If mechanical problems are suspected (such as worn clutches or gears), additional diagnostics and repairs may be required.

It is important to note that the exact repair depends on the specific cause identified during the diagnostic process. It is recommended that you contact a qualified auto mechanic or auto repair shop to conduct a detailed diagnosis and fix the problem.

What is P0975 Engine Code [Quick Guide]

Add a comment