Air bellows in springs

If you often drive your car with full or partial load, then you run the risk of simply "killing" the suspension over time. The fact is that at a high load, the springs are in their boundary position. And the more they are in this condition, the more the ground clearance will decrease over time, which will negatively affect the cross-country ability, and the entire chassis as a whole will lose its original properties.

What are air bellows for?

To prevent this from happening, they came up with several ways. But one of the best is definitely the installation of air bellows in the springs of the car. They will become auxiliary elements for stabilizing the body at high loads, which will significantly reduce the negative impact on the chassis of the car, and will also make it possible to maneuver more stably, without rolls and similar problems.

The principle of operation of pneumatic bellows

As a rule, this element is made from composite polyurethane, because this material has a fairly high strength and durability. Also, the air bellows are equipped with a special fitting, to which you can easily connect the air line. This balloon is installed inside the suspension spring to serve as an auxiliary member.

As soon as the load on the springs increases, they, of course, are compressed, and in this case, the stabilizing element, which will become the air spring, will not even interfere. It is distinguished by a fairly large endurance, and therefore it will withstand the loads that can be exerted on the suspension on passenger cars and crossovers.

As practice shows, similar products work in the region of three years (more accurate figures depend on what the manufacturer of the product is). Conveniently, this tuning can be installed on absolutely any car, because in most modern cars the suspension consists of free-standing springs. At the same time, the products themselves are not universal, they differ in size and rigidity, which allows you to choose the ideal auxiliary element for absolutely any car model.

All you need to do for normal operation of the air bellows is to pump them up from time to time so that they do not lose their shape and stiffness. And together with the pneumatic bellows, the stability of the entire suspension system also increases!

Advantages and disadvantages

As a reinforcing element for the suspension of your car, air bellows have many advantages:

• You do not need to make changes to the standard car suspension, the air spring will only serve as an auxiliary element;
• Significantly extend the service life of the entire suspension system of the machine;
• The lifting capacity of the machine is increased due to the stiffer springs;
• The car does not roll and drives quite stable, without any problems that usually arise when overloading;
• The ground clearance does not decrease even when the car is loaded;
• Installation of this part will definitely not require large investments, a lot of effort or time, you can easily cope with such a task yourself;
• Suitable both for those cars that have not been in operation for too long, and for those where the suspension has already "seen the views";
• This is a fairly budgetary and affordable means of strengthening the suspension in comparison with alternative solutions;
• The result is really what the motorist expects!

At the same time, there are very few shortcomings and air bellows:

• So, they are a temporary solution that will help the suspension to function normally for several years;
• You will need to pump up the cylinders from time to time, while it is important not to forget to carry out this manipulation, otherwise the part will serve only "for beauty".

As you can see, air springs have a lot of advantages, and therefore they can be called a really excellent solution for every motorist, especially since you will not have to pay much. The effect may be temporary, but it is definitely worth its money!

Do-it-yourself air bellows installation

MOUNTING OF AIR CUSHIONS IN SPRINGS Trafis, Vivaro

Price

If we talk about the price, the air bellows installation kit for a car depends on the model, but, in general, it is really available for any motorist. Estimated cost will be around $ 200 for the installation kit.

At the same time, you are unlikely to need to pay extra for installation and swap services, since you can do all these procedures yourself without any problems. There are models that are cheaper and more expensive, but, as a rule, the price directly reflects the properties of the goods, and therefore we do not recommend that you purchase the cheapest models!

Owner feedback

As the experience of operating air springs for car springs shows, these parts really help the suspension to serve much longer, this is noted by all motorists who use such tuning. In addition, drivers note the ease of operation of the pneumatic bellows, the installation also does not cause any problems for anyone. Some motorists believe that it is better to strengthen the suspension with other, more radical methods, but they require significantly more investments, although they will work constantly.

So, if you want to increase the carrying capacity of the car and keep the suspension in good condition, even with long-term operation of the car for little money, with a minimum of effort, then you should definitely install air bellows for car springs!

Air bellows in Toyota Land Cruiser springs

DIY Air Suspension for Toyota Land Cruiser 100/200