Painting a car with mother-of-pearl paint - photo, video
Content
Each car owner dreams that his car shone and shimmered in the rays of the sun, especially for this, a mother-of-pearl color is selected.
As soon as this color appeared in the palette for painting, it was used to paint expensive cars, then it was believed that only wealthy owners could take advantage of such luxury.
In addition, it is very difficult to achieve a smooth hue transition. The feeling of luxury remains, but everyone can afford such a procedure.
Why is everyone so attracted by this color? The point is its ability to change the shade - from golden to one-time, in the shade it can generally shimmer soft cream.
Pearlescent color - types of paints
The shade of mother-of-pearl paint changes due to its constituent components. When exposed to light, this effect is achieved due to synthetic crystals, which are colored on one side only.
Decorative properties are provided by the process of mixing mother-of-pearl with the base of the coloring paste. The concentration of elements depends on the preferences of the owner of the car and the result he wants to get.
There are several types of paints, and they are classified according to the following criteria:
- Colour;
- The level of crushed mica - light reflectors;
- Chosen application option.
In the first case, pearlescent pastes can be presented in any shade due to the fact that the paint is diluted with shimmering mica pigments. Drivers often choose such colors - silver, blue, red, white.
The white shade, although popular, must be prepared for the fact that it requires special care. If a chip or swelling appears on the surface, it will be immediately noticeable with this coloring.
To avoid streaks and fading, future owners of a white mother-of-pearl shade will have to thoroughly mix the paint with a solvent. The remaining shades are not so whimsical with the appearance of a spot, it can be retouched, and it will not be so striking.
As a rule, when cracks appear, they try to completely repaint the car.
The consistency directly depends on how much the surface will overflow. Mica particles should be larger, only in this way can a brighter color and refraction be upholstered.
Choose compounds with a pointer greater than 20 micrometers. Small particles of mica do not exceed this figure. Such paint is covered evenly and has a smooth transition of shades.
Applying pearlescent color can be done in two ways:
- Pearlescent paste is applied to the painted surface in one layer. In this case, the consistency is no more than 1% iridescent pigment.
- Mixing pearlescent paste with acrylic paint. You should first apply a solid color-substrate. And on top of the painted surface for the strength and durability of the coating, apply a decorative varnish.
How to get a pearly color
Getting a white pearl shade is very difficult. For this, it is necessary to use special pigments that can reflect color.
When a beam of light hits the pigments, a beautiful overflow is formed, which changes the shade from the angle of view. It is worth noting that mother-of-pearl painting is recommended for use under certain weather conditions and for careful drivers, because in case of serious blows, it will not protect the body from scratches and chips.
Drivers are presented with a large range of bright and bed shades. To make the car more noticeable, no additional textures or frills are required.
You can simply mix two or even three unique shades, which will allow you to prepare an exclusive coloring composition.
Follow some recommendations when applying mother-of-pearl paint, and you will certainly get an impeccable result, it is always a pleasure to show off such a machine to your loved ones:
1. Visual depth can be achieved by double and triple painting. But do not confuse "mother of pearl" with shades of "metallic" and "chameleon".
2. When selecting all the components for painting, try to select one specified brand. Simply, compositions of different brands may reject each other, and cracks or swelling may appear on the surface of the machine.
Multi-layer painting of the body surface cannot be avoided if you decide to achieve a shimmering effect.
3. The most difficult task when painting is creating the same highlights on the body. This effect can only be achieved if the paint used is at the same temperature as the car body.
If it is colder, the flickering effect will look very different. The difference between such transitions will be visible to the naked eye. The same temperature of the paint and the surface guarantees a strong bond to the metal.
Before application, the surface must be polished with high quality, because all defects will appear with drying.
4. The shade of the substrate should be the same as the base, the faster you apply it after cleaning, the better it will affect the body.
5. In the manufacture of paint, check its fluidity by diluting with a solvent. Apply the paint in two layers, and be sure to fix the result with varnish. It is applied in several layers.
The first with a minimum amount of solvent. Usually 30-40 minutes are enough for the solvent to evaporate and the layer to dry, then you can carry out the procedure again to fix the varnish layer.
Many recommend contacting specialists who will advise on the choice of color. He will also be able to tell what paint or pigment can achieve the desired effect.
It is worth remembering that such paint is more capricious.
Even after a heavy downpour, poor coverage can be ruined. Do not save on materials and then you will be sure of the result. This is almost the only negative, otherwise you get an original and beautiful appearance.
Be sure to study the recommendations that are indicated in the content of the paint, do not forget about protective ammunition during work.
Technology of painting cars in pearl white color
It is necessary to carefully prepare for the procedure and stock up on such materials: varnish, spray gun, substrate, base, solvent, primer, grinder.
In the field of automotive painting, pearlescent color is one of the popular shades. Black mother-of-pearl is in great demand.
Inexperienced craftsmen in this matter choose this option for applying the material - sequential coloring with enhanced iridescent color.
Patience and attention are the main qualities required during a complex painting procedure:
1. Preliminary preparation of the body is the same as for conventional painting - cleaning from dirt and dust, grinding, degreasing. The spray booth must be the same temperature as the machine.
If there is a crack on the surface, then it is necessary to cover it with a primer, sand it after drying. To speed up the work and carry it out at a professional level, you need to use a grinder. It also minimizes the possibility that you will miss some part of the body.
These works are carried out where it is dry and there is ventilation. Wear gloves to keep mother-of-pearl from getting on your hands. Since mother-of-pearl is similar to gloss, creating a smooth coating is indispensable, all roughness will be visible. Once you have prepared the surface for painting, apply the undercoat.
2. Do not delay applying the underlay, which must match the base color.
3. Apply paint in 2-3 layers, after preparing it. The best option is a 2: 1 ratio - 100 grams of base per 50 solvent. Mother-of-pearl is applied with a paint gun, the tool evenly sprays the paint.
The layer dries up after 30 minutes, outwardly it immediately becomes matte. Paint is drained from the gun into a previously prepared container. More solvent is added there, and the paint is again applied on top of the first layer. Subsequent layers can already be made thicker.
4. The varnish is applied according to the same principle - the first layer is dry, and the second with a solvent. To apply it, take several times less than indicated in the instructions. Do not rush to apply varnish so that streaks do not form, otherwise you will have to do everything from the very beginning.
Each coat of paint is applied when the solvent is completely weathered. You should not touch the surface, you can not polish, matte.
The success in this procedure is one hundred percent dependent on you, because it is important to wait until it is completely dry, do not touch the coating and observe the equality of temperatures.
As you can see, the procedure is very laborious and complicated, but it's worth it. After all, you get a beautiful shimmering shade, reliable protection against chips, a high rate of heat resistance.
Such a procedure in any workshop will cost a pretty penny, so many try to figure it out on their own. For the sake of such brilliance, neat coverage and original appearance, many drivers are willing to spend money.
