Runway headlights

With age, car headlights become cloudy. This cannot be called a serious drawback, but such a phenomenon greatly affects the appearance of the car and gives out its mileage. Replacing a headlight on most cars is quite expensive, especially if it's a foreign car, and changing the entire headlight just because the glass is cloudy is not recommended.

The Russian-American company Runway has developed a new high-tech tool that will help motorists solve the problem without spending a lot of time and effort.

Description, composition and purpose of the product

Tube 50 ml

Runway polish is a special headlight polishing product that contains fine abrasive particles. Auto chemicals are also suitable for plastic parts, plexiglass parts and acrylic paints.

The polish removes minor scratches and scratches, allowing you to restore the appearance of the car in 5 minutes. The composition can be used for both manual and machine processing.

Fine abrasive polishing paste quickly restores transparency to headlights and taillights. Silicone is completely excluded from the composition of the product.

Operating principle

Runway headlight polish contains a fine grit abrasive. These are polymer particles with rounded edges. With intensive movements and contact with a scratch, they begin to smooth out the corners, slightly removing the top layer of the coating. After processing, the damaged surfaces are rubbed with an abrasive and removed with water. In front of him, the car owner sees another untouched layer of plastic.

You don’t have to worry about damage to the layer, since the depth of polishing with the help of the composition is only a couple of micrometers.

Instructions for use

Manual headlight polishing consists of the following steps:

1. Headlights need to be cleaned and cleaned.
2. Apply polish to a clean, dry cloth.
3. In a circular motion, start polishing the headlight. You need to move so that each subsequent layer overlaps the previous one, while gradually weakening the pressure.
4. After finishing the polishing process, rinse the headlights with water and wipe with a clean, soft, dry cloth.

The machine polishing process is similar. The only difference is that instead of a rag and hands, you need to use a grinder or a grinder with a suitable nozzle.

When machine polishing, do not press too hard on the surface, otherwise the workpiece may be damaged.

Advantages and disadvantages

250ml

Benefits of Runway Headlight Polish:

• lack of silicone;
• universality;
• quick effect

Buyers also note such advantages of auto chemicals as low cost and ease of use. No flaws were found in the tool.

Release form and articles

First name	Provider code	Form of issue	Volume
Runway headlight polishing	RW0501	tuba	50ml
RW2545	bottle	250ml

Video

RUNWAY headlight polishing