Chery Amulet fuses
Content
Cherry Amulet Car has five mounting blocks with relays pre-installed - Breakers, Fuses.
Where is the main unit located: in the passenger compartment, to the left of the steering wheel. Double Blocks:
- behind the battery;
- For the zabornik;
- Behind the engine exhaust manifold.
To simplify the process of searching for modules on the back of the plastic cover of the case, there is an arrangement, decoding, pinout for each of the fuses.
It is not difficult to have replaceable fuses on your own, there are no special skills. Be extremely careful, Disturb the assembly of the installation, which leads to the transfer of the output from the equipment design.
If necessary, seek qualified assistance from a service station specialist.
Description of fuses: location, diagrams, price
Fuse Installation Diagram
| Marking / symbols | What is responsible for (with description) |
|---|---|
| F(F-1)/20 | Speedometer, tachometer, gauges |
| F(F-2)/5 | Reservation |
| F(F-3)/10 | Reservation |
| F(F-4)/10 | Reservation |
| F(F-5)/20 | car signal |
| F(F-6)/30 | central locking |
| F(F-7)/30 | Reservation |
| F(F-8)/20 | ELECTRICAL SYSTEM POWER |
| F(F-9)/10 | Windshield wipers |
| F(F-10)/10 | Headlight washers |
| F(F-11)/10 | Rear window washer |
| F(F-12)/10 | Fuel equipment (optional) |
| F(F-13)/30 | Automatic transmission control type |
| F(F-14)/30 | Stove, stove, lights the salon |
| F(F-15)/10 | Car socket |
| F(F-16)/15 | Additional electrical network |
| F(F-17)/15 | Emergency, turn signals |
| F(F-18)/20 | Reservation |
| F(F-19)/20 | Rear window defogger |
| F(F-20)/20 | Oxygen sensor |
| F(F-21)/20 | Reservation |
| F(F-22)/20 | Power windows |
| F(F-23)/20 | Exchange rate stabilization system |
| F(F-24)/20 | ABS (ABS) |
| F(F-25)/15 | Reservation |
| F(F-26)/15 | Reservation |
| F(F-27)/20 | Glove box lighting |
| F(F-28)/15 | Fan heater (stove) |
| F(F-29)/15 | The air conditioning system |
| F(F-30)/20 | Fuel system, fuel pump relay |
| F(F-31)/15 | Safety system |
| F(F-32)/20 | Reservation |
| F(F-33)/20 | Powertrain sensor |
| F(F-34)/20 | Side mirrors |
| F(F-35)/20 | stop signs |
| F(F-36)/20 | Reserved |
| F(F-37)/20 | Reserved |
| F(F-38)/20 | Reserved |
| F(F-39)/20 | Reserved |
| F(F-40)/20 | Reserved |
| F(F-41)/20 | Additionally |
| F(F-42)/20 | Additionally |
| F(F-43)/20 | Additionally |
| F(F-44)/20 | Additionally |
| F(F-45)/20 | Additionally |
| F(F-46)/20 | Additionally |
Detection circuit - breakers
| Notation | What request is answered / what is required |
|---|---|
| MK1 | backlight |
| MK2 | Salon Lighting |
| MK3 | Windshield washer relay |
| MK4 | Reservation |
| Mk5 | Reservation |
| MK6 | Electronic powertrain control unit |
| MK7 | Reservation |
| Mk8 | Reservation |
| Mk9 | Reservation |
| MK10 | stop signs |
| MK11 | Headlight |
| Mk12 | Throttle valve |
| Mk13 | Power windows |
| Mk14 | Rear fog lights |
| Mk15 | Ignition |
| Mk16 | Fuel apparatus |
| Mk17 | Electrical equipment |
| MK18 | Reservation |
| Mk19 | Contact silver rear lights, brake lights |
| Mk20 | Block of digital sensors |
The price of the original mounting block with fuses for the Chery Amulet car is from 4500 rubles, analogues from 3800 rubles, relay-breakers from 450 rubles / piece.
Signs of faulty fuses on Chery Amulet
- A spark shoots between the fuses on the occasion of weak contact, flat burnout;
- At the installation site of the unit, the smell of melted, burnt plastic is heard;
- On the instrument panel signals the status indicators of the equipment;
- When activated, the power supply equipment is not active.
Reasons for the failure of the fuses on Chery Amulet
- Failure to meet the deadline for the inspection of a technical vehicle;
- Purchase of non-original spare parts;
- Violated installation technology;
- Deformation of the mounting block;
- Short circuit in research wiring;
- Damage to shipping;
- Loose contacts on the terminals;
- Limit oxidation.
Replacing fuses on Chery Amulet
Preparatory stage:
- plastic brush;
- Screwdriver;
- A set of new modules, relay - interactions;
- Additional lighting as needed.
The sequence of actions when replacing in the cabin:
- We open the driver's door, on the left side of the steering wheel we snap off the plastic cover, under which the mounting block is installed;
- We find the module by serial number, remove it with plastic tweezers;
- Insert a new fuse into its original place, close the cover.
To replace modules in the engine compartment, you must:
- Place the machine in the perimeter of the repair area, apply the parking brake, fix the rear row of wheels with wheel chocks;
- Open the hood, remove the power terminals. To the right behind the battery (battery) there is a mounting block with relay-breakers. Carefully open the plastic cover, remove the relay, replace it with a new one.
By Analogy Replaceable relays - Breakers Installed behind the intake, Behind the exhaust manifold of the power unit.
The service life of the relay - interruption lasts for fuses, because they are changed extremely rarely. As a rule, after an accident, accident, deformation of the body, mounting block.
Before carrying out the work are presented with a list of one hundred, Automazin Managers, read the recommendations on the Internet.
Masters of the Service Centers recommend the mounting block for the presence of moisture after long trips through puddles. Dry, blow with compressed air as needed. Avoid the formation and accumulation of condensate in the plastic case.
