Fuses, relay UAZ 2206
UAZ 2206 Loaf - the popular name for a family of all-wheel drive utility vehicles with cross-country ability, produced in various modifications since 1965 (UAZ 452, 3741, 3909, 39094, 3962, 3303, 3741) mainly with gasoline engines (injection and carburetor). In this article, we will show the connection diagram, description of the fuses and relays UAZ Loaf 2206 and their locations.
Electroscheme
Description
| а | front lamp; |
| two | lighthouse; |
| 3 | special signal lamp (only for UAZ-3962); |
| 4 | heater fan electric motor (only for UAZ-3962, UAZ-2206); |
| 5 | brake hydraulic traction alarm signal lamp sensor; |
| 6 | sound signal; |
| 7 | side turn signal repeater; |
| 8 | flashing beacon (only for UAZ-3962); |
| 9 | headlight rotary switch; |
| 10 | interior lighting cover; |
| 11 | signal lamp for switching on the parking brake system; |
| 12 | parking brake warning light switch; |
| thirteen | wiper motor; |
| 14 | wiper and washer motor switch; |
| fifteen | speedometer; |
| sixteen | signal lamp for switching on high beam headlights; |
| 17 | voltmeter; |
| 18 | oil pressure sensor; |
| night | emergency oil pressure warning light; |
| twenty | coolant temperature gauge on the cylinder block; |
| twenty-one | signal lamp for emergency overheating of the coolant in the radiator; |
| 22 | fuel level indicator; |
| 23 | washing machine engine |
| 24 | emergency switch; |
| 25 | turn signal lamp; |
| 26 | signal lamp of an emergency condition of a hydraulic drive of brake system; |
| 27 | egnition lock; |
| 28 | central light switch; |
| 29 | thermal fuse; |
| thirty | heater resistance; |
| 31 | heater electric fan switch; |
| 32 | headlight switch; |
| 33 | rear fog lamp switch; |
| 3. 4 | headlight or fuse box; |
| 35 | plug; |
| 36 | imbalance solenoid valve; |
| 37 | turn signal switch; |
| 38 | sound signal button; |
| 39 | oil pressure alarm sensor; |
| 40 | emergency lamp sensor for emergency overheating of the coolant in the radiator; |
| 41 | oil pressure indicator sensor; |
| 42 | coolant temperature indicator sensor in the cylinder block; |
| 43 | turn signal switch; |
| 44 | heater fuse (only for UAZ-3962, UAZ-2206); |
| Four five | heater fan electric motor switch (only for UAZ-3962, UAZ-2206); |
| 46 | heater electric fan switch resistor (only for UAZ-3962, UAZ-2206); |
| 47 | heater fan electric motor (only for UAZ-3962, UAZ-2206); |
| 48 | generator; |
| 49 | spark plug; |
| fifty | distribution sensor; |
| 51 | ignition coil; |
| 52 | switch "mass"; |
| 53 | battery; |
| 54 | dome light switch; |
| 55 | plug (only for UAZ-3962, UAZ-2206); |
| 56 | ceiling; |
| 57 | transistor key; |
| 58 | emergency vibrator; |
| 59 | electronic carburetor control unit; |
| 60 | microswitch; |
| 61 | additional resistance; |
| 62 | additional starter relay; |
| 63 | solenoid valve; |
| 64 | Start; |
| sixty five | fuel level sensor in the tank; |
| 66 | brake signal switch; |
| 67 | reversing light switch; |
| 68 | back light; |
| 69 | rear fog lamp; |
| 70 | car license plate light; |
| 71 | reversing light; |
| 72 | jack |
Fuses and relays
General plan
designation
- headlight or fuse box;
- turn signal switch;
- ABS lamp control relay;
- high beam relay;
- dipped beam relay;
- wiper switch;
- rear fog lamp relay;
- starter relay.
Relay 7 for the rear fog lamps is located on the front panel frame extension under the instrument panel in the area of the right headlight.
In the area of the brake pedal support there is a wiper switch 6, a high beam relay 4, a low beam relay 5.
The fuse box is located on the left under the instrument panel and has three separate mounting inserts.
scheme
Goal
For vehicles with ZMZ-4091 Euro-3 engine.
F1 for 10 amps, pin I - signal lamp unit, alarm, speedometer, dashboard, ABS sensors, if installed on the car.
F1 for 10 amps, pin II - reserve.
F2 at 10 amps, pin III - Alarm, horn.
F2 for 10 amps, pin IV - recirculation pump, heater switch, reversing light switch.
F3 for 10 amps, pin V - Integrated microprocessor engine control system, power switch.
F3 for 10 amps, pin VI - power switch, bimetal thermal fuse.
For vehicles with ZMZ-40911 Euro-4 engine.
F1 for 10 amps, pin I - signal lamp unit, alarm, speedometer, dashboard, ABS sensors, if installed on the car.
F1 for 10 amps, pin II - reserve.
F2 10 amp pin III - turn signal switch, alarm, socket.
F2 for 10 amps, pin IV - recirculation pump, heater switch, reversing light switch.
F3 for 10 amps, pin V - Integrated microprocessor engine control system, power switch.
F3 for 10 amps, pin VI - power switch, bimetal thermal fuse.
The fuses for the ABS system are located in the bulkhead behind the driver's seat for 25A or 40A.
