Motul MoCool graft
Content
Cooling and normalization of heat transfer is one of the main components of the efficient operation of the engine. But there are situations where conventional coolants just can't handle it: sports, racing, or tough driving conditions. To prevent overheating of the engine, it is recommended to add special additives to antifreeze. One of these is Motul MoCool.
Product Description
Motul MoCool is a concentrated purple additive that improves engine heat dissipation and reduces engine operating temperature by 15 degrees. It can be used diluted with distilled water or added to low freezing antifreeze.
The additive provides effective protection of pump and engine parts against corrosion and cavitation. Does not affect the material of pipes and connections. Completely safe for copper, metal, bronze, brass parts. Suitable for pouring into cooling systems of engines made of aluminum or magnesium alloys.
Application area
Motul MoCul is allowed to be used in diluted form for the cooling systems of cars, motorcycles or ATVs. Reduces engine operating temperature by up to 15 degrees in severe driving conditions, racing or sporting events.
ATTENTION!!! Some racing and competition rules prohibit the use of any coolant other than distilled water. Before use, make sure that the antifreeze is approved by the competition regulations, as the manufacturer Motul cannot be held responsible for disqualification. Also, according to the technical characteristics, the additive does not have the properties of protecting the engine from defrosting.
Technical specifications
Index | Verification method | Cost/Units |
---|---|---|
Color | — | violet |
Density at 20°C (68°F) | ASTM D1122 | 1,058 g / cm3 |
RN | ASTM D1187 | 9.4 |
Release form and articles
107798 Motul MoCool 0,5 л.
Instructions for use
MoCool is a concentrate that cannot be used on its own. Before use, it must be diluted with distilled water to obtain a 5% solution (20:1 ratio). Recommended as a fluid in cooling systems.
Use with low freezing antifreeze is possible.
Advantages and disadvantages
The supplement has a large number of positive reviews on the application and the following advantages:
- Effectively protects pump and motor parts from corrosion and cavitation.
- Improves engine heat transfer and reduces its operating temperature by 15 degrees.
- Suitable for use in engine cooling systems made of aluminum or magnesium alloys.
- Does not affect the material of pipes and connections.
- Safe for copper, metal, bronze, brass parts.
- Helps improve the performance of the cooling system.