Power Steering Additives Hi Gear, Step Up and Liquid Moli: How to Choose the Best
Content
The composition confidently manifests itself during operation in all regions of Russia - both in the south and in the Far North. But Hi Gear and Stepup are also doing well. But in the first case, the cost is higher, and in the second, the expense is higher. Also, High Gear products are much more often counterfeited, and this jeopardizes an expensive hydraulic booster.
The power steering is still actively used by many automakers, despite the spread of the EUR. Increasingly, "hybrids" are used in the form of EGUR, where an electric drive is responsible for the operation of the pump. In all cases, motorists seek to extend the service life of both working fluids and the entire system - repairing its components cannot be called cheap. This is what the Hi Gear power steering additive and its analogues are used for. How effective these funds are and whether it is worth buying them - we will consider further.
How to choose the right additive for your car
We do not recommend buying the first product that caught your eye in the store. Remember that price is not the only important nuance. The properties and composition of different items can vary significantly. First of all, pay attention to the compatibility of a particular additive with the power steering fluid. Failure to comply with this rule leads to its foaming and precipitation, which has a detrimental effect on the mechanics of the rack and pump. For the same reason, it is better to buy them in trusted online stores in Moscow.
Hi Gear additives for power steering
There are several groups of such additives according to their working properties:
- Elimination of friction - they extend the life of the entire mechanism of the amplifier.
- Moisture protection - shown to off-road owners - they can save the rack and pump mechanism if water and dirt get inside.
- "Thinning" - necessary for motorists operating vehicles in the conditions of the northern regions. The task of such compositions is to eliminate excessive viscosity at extremely low temperatures.
In addition to working components, they often contain dyes of "toxic" colors. This is necessary to prevent their erroneous mixing with other formulations. Along the way, these compounds eliminate the foaming of power steering fluids and protect rubber parts from chemical wear, preventing leakage. You should not count on their recovery with existing physical damage, but the composition really returns the elasticity and flexibility to them.
Comparison of the best power steering additives
Of course, potential buyers would like to know which products from this category have proven themselves better in practice. We will try to answer the question by collecting statistics from user reviews.
Hi Gear
Products from the eminent manufacturer High Gear are liked by many domestic motorists. Their advantages include:
- High Gear compounds prevent the appearance of microcracks on the inner surface of high pressure hydraulic hoses.
- Restoration of elasticity of rubber parts, including oil seals.
- HG reduces the likelihood of scoring on the steering shaft and other components of the power steering system.
In critical cases, the High Gear additive can be used as a sealant capable of eliminating oil leaks from the circuit and restoring its tightness. This makes Hi Gear a welcome guest in the trunk of any car traveler.
Step Up
The less famous, but no less reliable Step brand of Russian origin is also popular with experienced drivers. Magnesium compounds on a silicate basis are the key to success. Thanks to this, Step additives extend the life of all power steering mechanisms.
Reviews confirm that when using them, it is possible to reduce the intensity of noise that appears when amplifier components wear out. Also, the use of Step noticeably softens the cases of “biting” of the steering wheel, which occurs when the mechanism is heavily worn, and facilitates the torsion of the “steering wheel”.
"Likvi Moli"
The additive from Liqui Moly is good for preventing leaks. Also, its use allows you to increase the pressure in the worn-out power steering system to optimal values. The second advantage of Liqui Moly products is their pronounced washing ability. They help to eliminate the consequences of the "savings" of previous owners, when the internal parts of the mechanism are filled with deposits and wear products.
liqui moly power steering additive
Motorists warn that the composition should not be poured into systems without first flushing with clean dextron or other suitable liquid. Due to the rapid detachment of contaminants and their entry into the oil, there is a possibility of scoring on the rod. Before pouring Liquid Moli, you need to drain the old liquid, change it to a new one with a flush, and only then use the composition.
Which additive is better: driver reviews
But what do the buyers themselves say, what do they advise to buy? Of the three listed, according to most motorists, Liquid Moli can be considered optimal. They highlight several of its advantages:
- Moderate cost.
- Ease of driving - the steering wheel can be turned with one finger. Not every type of tuning is capable of this.
- Profitability - every 35 ml is enough for a liter of working fluid in the circuit.
- Sealing properties - adding 35 ml to the power steering reservoir, you can drive more than a thousand kilometers almost without loss of oil.
The composition confidently manifests itself during operation in all regions of Russia - both in the south and in the Far North. But Hi Gear and Stepup are also doing well. But in the first case, the cost is higher, and in the second, the expense is higher. Also, High Gear products are much more often counterfeited, and this jeopardizes an expensive hydraulic booster.
