BG additives and flushes
Flushing BG 109
BG additives are not as widespread in the Russian market as auto chemicals from some other manufacturers, but they are rightfully in demand among motorists. And one of the most common products of this company is the BG 109 flush.
Low-grade or simply low-quality oil contains in its composition an increased amount of sulfur, silicon and other compounds, which are the source of the formation of solid deposits in the piston rings. Due to the appearance of these deposits, compression in the cylinders decreases, wear of liners, rings and pistons increases, engine power decreases and fuel consumption increases.
For soft decarbonization of rings, additive BG 109 is used. It is poured into fresh oil at the rate of one bottle of 335 ml per 4-5 liters of oil. The effect occurs on average after several hundred kilometers. Also, this composition copes well with sludge deposits in the cylinder block.
Decarbonizing BG 211, compounds BG 110, BG 244, BG 245
Decarbonizer BG 211 is an aggressive auto chemical product designed for direct cleaning of piston rings. It is poured directly into the cylinders through the holes for the candles. The engine must be cold, or at least not hot. The effect on average occurs after 5-6 hours in the cylinders. The manufacturer recommends that the pallet be dismantled beforehand if it is painted, as the BG 211 decarbonizing agent can split the paint. One bottle of the product is designed for 4 cylinders.
Additive BG 110 is a more advanced version of BG 109. It, judging by the reviews of motorists, works a little more efficiently than the previous liquid. Additive BG 110 is used in the same way as BG 109.
Additive BG 244 serves to service the fuel system. One bottle of 325 ml is designed for 60 liters of diesel fuel. The agent is poured during refueling into the tank, or it is diluted with fuel beforehand in a separate container. Cleans injectors and the fuel system as a whole. Allows fuel to burn more correctly and create less harmful emissions. Recommended for simple motors not equipped with complex control systems.
Additive BG 245 is an advanced product for cleaning the fuel system of diesel engines. It is mainly used in injection engines. It is poured into the fuel tank in the same proportion as BG 244: 325 ml per 60 liters. In addition, BG 245 improves cold starting by activating the fuel.
All of the above compounds should be used only after consultation with a qualified specialist. Inappropriate use of additives can lead to premature wear of components and assemblies and even damage the engine.
