Suction cup for bodywork: role, application and price
Content
The body suction cup is an indispensable tool for removing dents from your car. It is often included in a dent removal kit and allows you to find a homogeneous body without bumps. Thus, it is an affordable body repair tool.
🚗 What is the role of the bodywork suction cup?
The body suction cup is used to treat Bosses present on the body. This is especially effective on blows of hail, gravel or any other blow to the sheet. It can be round or rectangular with a round suction cup in the middle.
Thus, it consists of a rubber support, which is nothing more than a suction cup and two handles, one on each side. They allow you to remove the suction cup using traction force and, therefore, carry out the removal of dents on the body.
There are several sizes of bodywork suction cups depending on the area to be treated:
- From 2 to 80 mm : They are suitable for small impacts and small diameter impacts and have a tensile force of less than 30 kg;
- 80mm to 150mm : The diameter of these pads can withstand moderate impacts. Traction force from 30 to 50 kg;
- 150mm to 200mm : Designed for large areas, pulling force up to 60 kg.
💡 How to use the bodywork suction cup?
You don't need to have extensive knowledge of auto mechanics to use the bodywork suction cup. No equipment or tools are required to straighten the body other than the suction cup.
In order to perform the maneuver in complete safety, you can wear protective gloves. Also, before starting the procedure, start with check different sizes of suction cups on the area to be treated to select the correct pad diameter.
👨🔧 How to straighten the body with a suction cup?
To straighten your body with the suction cup, follow our step-by-step guide to take the right action and get the best result.
Required material:
- Protective gloves
- Suction cup for bodywork
- Microfiber cloth
Step 1. Position the handles
You can start by cleaning the area with a microfiber cloth to improve traction. The movable handles of the shell cup must be in the open position. This will allow you to position the suction cup over the area of your vehicle that you want to dent.
Step 2: Install the suction cup
Once the suction cup is in place correctly, the handle needs to be activated so that the suction cup can adhere to your body.
Step 3: pull the handle
Now you can pull firmly on the handle to straighten your body. You will need to shoot until complete recovery.
Then you can put the handles in the closed position and gently remove the suction cup from your body. Do not hesitate to repeat the operation if your body is not fully erect.
📍 Where to buy a body suction cup?
The body suction cup is a piece of equipment that can be found in various outlets. It's available to everyone car suppliers and others in DIY shops.
If you wish, you can also buy it online and compare different models and their prices. What's more, in most cases, you can consult other customer reviews to find the best suction cup for your car body.
💸 How much does a bodywork suction cup cost?
The price of a bodywork suction cup can vary greatly depending on the model you choose, its pulling force and the brand of your choice. On average, first models are sold between 5 € and 50 € while models with large sizes around From 80 € to 100 €.
However, you can choose boss removal kit which contains pliers, tabs, hammer, dressing needle and glue gun. This type of product is more expensive because it contains a lot of tools: you will have to pay between 60 € and 90 € for the latter.
The body suction cup is a very practical and easy to use device for straightening the body. If not mastic or painting If necessary, you can completely perform this manipulation on your car to restore body uniformity by eliminating the bumps and bumps it creates.
