Flushing the engine LIQUI MOLY Oil
Content
Car owners are constantly faced with changing engine oil. Modern engine oils contain special additives to help clean the engine. But there are situations when it is necessary to wash. For these purposes, a special flushing of the LIQUI MOLY engine oil system is used, which gently cleans the oil system from dirt and carbon deposits.
The German company LIQUI MOLY produces a specialized cleaning solution that is rapidly conquering the world market. The company produces more than 6 thousand items of products, which have repeatedly received awards in quality tests. In 2018, LIQUI MOLY won the "Best Brand" award again.
Description
The formation of sludge and any severe contamination can significantly degrade the condition of the engine and lead to its failure. Deposits can clog the oil filter, oil receiver mesh. Acid deposits corrode metal, and soot contributes to rapid engine wear and deterioration of engine oil quality.
Such deposits contribute to the narrowing of the oil channels, reduce the performance of the lubrication system, and unbalance rotating parts. Reducing the oil level in the parts causes friction and overheating.
Long-term flushing of the LIQUI MOLY engine helps to dissolve any varnish, sludge deposits, and removes carbon deposits. They can accumulate as a result of:
- Water entering the system.
- Use of poor quality oil or fuel.
- Prolonged overheating.
- Irregular oil change.
Flushing solution, article 1990, quickly removes any combustion products. The liquid contains oil-soluble detergents and heat-resistant dispersants. A simple application of the additive does not require laborious disassembly of the engine, but is simply poured into used oil 150-200 km before replacement.
<font><font>Materials</font></font>
Liquid Moli 1990 is easy to use. Applies to all vehicles running on diesel and gasoline fuels.
- Thanks to long-term use, it penetrates and cleans even the most hard-to-reach places.
- Promotes the formation of a protective layer on products.
- Eliminates timing chain noise, hydraulic lift clatter.
- Extends engine oil life.
- Cleans piston rings, oil channels, filters.
- Prevents the formation of a varnish film on metal surfaces.
- Prevents accumulation of combustion products.
After reading numerous positive reviews, you can be sure that the use of LIQUI MOLY 1990 increases the life of the engine and can delay its repair for a long time.
Technical specifications
| Basis | additives/carrier fluid |
| Color | dark brown |
| Density at 20 ° C | 0,90 g / cm3 |
| Viscosity at 20 ° C | 30mm2/s |
| Shoots the rhythm | 68 ° C |
| shallow rhythm | -35 ° C |
Areas of use
When buying a car with a mileage of more than 100 thousand km or before using a new type of engine oil, it is recommended to flush the engine. LIQUI MOLY Oil Schlamm Spulung is universally applicable in all petrol and diesel systems.
The flush solution is not suitable for motorcycles with oil clutches.
Application
Instructions for use are available and easy to use. Flushing is designed for long-term operation, so it must be filled in after 150-200 km before changing engine oil.
After warming up the engine, it is enough to add a flushing solution to the old engine oil. The solution is poured at the rate of a bottle of 300 ml per 5 liters of oil. After that, the car works in the normal mode, provided that the engine power does not exceed 2/3 of the maximum working one.
When passing the specified run, it is necessary to replace the engine oil and oil filters with new ones.
If the contamination is too strong, it is recommended to apply the solution again. You can use flushing before each replacement.
Release form and articles
Long-term flushing of the oil system Oil-Schlamm-Spulung
- Article 1990/0,3 l.
Video
