Deciphering error codes on-board computer BMW
Auto repair

Deciphering error codes on-board computer BMW

Deciphering error codes on-board computer BMW

The purpose of error codes in the BMW X5

The BMW X5 is an SUV equipped with many electronic systems, most of which, in the event of a malfunction, give error information, but, unfortunately, not in Russian, but in abbreviated English words. Therefore, such messages require decoding, which will be discussed in this article.

There are malfunctions that the driver can fix himself, such errors are reported by the SUV's on-board computer. It also alerts you if you can't do it without contacting a service center for troubleshooting.

Decoding of errors in the back of e53

All errors of an SUV of this modification can be divided into several groups:

  • General: Indicates that the driver has not met any condition to perform the requested action, such as not depressing the accelerator pedal while the parking brake is applied.
  • Optional: not present in all vehicles and assembly dependent, may report minor or major faults.
  • Error Messages: Serious error messages.
  • Incorrect messages: they talk about malfunctions that you can fix yourself or the need to take some action, for example, add oil.
  • Neutral: informs about the operation of a particular function, for example, the inclusion of a high beam.

Decoding errors on-board computer

The on-board computer issues an error code, or its abbreviated name in English. If more than one error is found, a plus sign is displayed next to the error name to indicate that there are additional errors that can be viewed using the on-board computer navigation bar.

Common problems with the on-board computer:

  • SPEED LIMIT, informing about exceeding the speed limit set in the on-board computer.
  • HEAT, preheater operation warning, during which the engine should not be running.
  • FASTEN SEAT BRETS - a warning that the driver has not fastened his seat belts.

Suspension errors

These issues include EDC INACTIVE: Report EDC malfunction.

Scanner errors

  • These issues include Bremsbelage [BREAK LININGS]: Brake pad sensor failure or replacement message.
  • Oelstandmotor [LOW ENGINE OIL], reminding you to add oil to the machine.
  • The Oeldruck sensor [OIL PRESSURE SENSOR] notifies the ATV owner of a problem with the oil sensor.
  • Check Control [CHECK CONTROL] reports a system failure of the vehicle's scanners and on-board computer. But in fact, this is tantamount to freezing a home computer. You just need to stop the SUV and restart the engine.
  • One of the most serious errors is ENGINE FAILSAFE PROG, which warns the driver about serious engine malfunctions and the need to urgently contact a service center. Another serious off-road error is TRANS FAILSAFE PROG, which warns of a transmission malfunction that requires an early service call.
  • SET TIRE PRESSURE prompts the driver to check the tire pressure and correct the problem if there is one.
  • Message for inattentive drivers KEY IN IGNITION LOCK, warns viewers about the keys left in the ignition. And if the vehicle's brake fluid level is low, the message Bremsflussigkeit [BREAK FLUID LOW] will appear.
  • The message [COOLANT TEMPERATURE] warns extremely cold passengers to turn off the engine due to overheating caused by running the heater at full power.
  • CHECK HIGH BEAMS Warning: Illuminates when there is a high beam problem. If the reversing lights do not come on, the error message CHECK REVERSE LAMPS is displayed.

Translation of errors on-board computer bmw e39 e46 e53

Deciphering error codes on-board computer BMW

 

Search for photo reports

P - The signal of the coolant temperature sensor is outside the limits of adaptation. P - Coolant Temperature Sensor - Low. P - Throttle position sensor "A" is defective. P - Throttle position sensor output signal "A" - low level.

Meanings of icons on the dashboard of a car part 3

P - Too rich mixture. P - Possible fuel leak in bank 2. P - Lean mixture in bank 2. P - Too rich mixture in bank 2. P - Fuel rail pressure sensor signal - low. P - Malfunction of the engine oil temperature sensor circuit. P - Engine oil temperature sensor signal - out of adaptation range.

P - Engine oil temperature sensor signal - low. P - Malfunction in the injector control circuit.

P - malfunction of the control circuit of the nozzle of the 1st cylinder. P - malfunction of the control circuit of the injector of the 2nd cylinder. P - Malfunction of the control circuit of the nozzle of the 4th cylinder. P - malfunction of the control circuit of the nozzle of the 5th cylinder. P - Malfunction of the control circuit of the nozzle of the 6th cylinder. Tur Offen Open door The door of the door is open.

Warning lights are on. Replace the ignition key battery. Bitte angurten Fasten your seat belts Fasten your seat belts. You should fasten your seat belts.

Speed ​​limit Speed ​​limit The speed limit set in the on-board computer has been exceeded. Niveauregelung Malfunction of the hydraulic ride height adjustment system. Contact the workshop.

Use the instruction manual.

Risk of ejection of fuel or its vapors. Make sure the fuel tank cap is properly closed and latched.

Check the fuel tank cap. 33 Digital engine electronics DME, digital diesel electronics DDE Engine fault! Drive carefully. Don't speed up. Engine failure Excessive load on the engine can damage the catalytic converter. The increased load on the engine damages the catalyst.

Drive with moderate engine load. Error checking in the car can be done both at a specialized service station, and independently at home.

BMW X5 error decoding table. Must have! – BMW X5 car

Deciphering error codes on-board computer BMW

26 December 2013 g

Utility:

(15 votes, average: 3,80 out of 5)

Charger…

BMW X5 is a car stuffed with electronic systems. Many of them have their own error codes, which we will now decipher. This list of BMW x5 error codes is handy to print out and keep in your glove compartment just in case.

What does it do?

If you do not repair the car yourself, you can at least tell the service what is wrong with it. We will also give you what to do in especially critical situations. Can we start?

English errors - Russian translation of BMW X5 errors

Common

  • RELEASE PARKING BRAKE - Release parking brake
  • CHECK BRAKE FLUID - check brake fluid level
  • HAVING! ENGINE OIL PRESS - Stop! Low oil pressure in the engine
  • COOLANT TEMPERATURE - Coolant temperature
  • BOOTLID OPEN - open the trunk
  • DOOR OPEN - The door is open
  • CHECK BRAKE LIGHTS - Check brake lights
  • CHECK LOW HEADLIGHTS - Check low beam
  • CHECK TAILLIGHTS - Check taillights
  • CHECK PARKING LIGHTS - Check side light
  • CHECK FRONT FOG LIGHTS - check fog light strip
  • CHECK REAR FOG LIGHTS - Check rear fog lights
  • CHECK NUMPLATE LIGHT - Check license plate lighting
  • CHECK TRAILER LIGHTS - Check trailer lights
  • CHECK HIGH BEAM - Check high beam
  • CHECK THE REVERSE LIGHTS - Check the reverse lights
  • PER. FAILSAFE PROG - automatic transmission emergency program
  • CHECK BRAKE PADS - Check brake pads
  • LOW WINDSHIELD WASHER LIQUID - Add water to washer reservoir
  • CHECK ENGINE OIL LEVEL - check the engine oil level
  • IGNITION KEY BATTERY - Replace ignition key battery
  • CHECK COOLANT LEVEL - Check coolant level
  • TURN ON THE LIGHT? - Is the light on?
  • CHECK STEERING FLUID LEVEL

Optional

  • TIRE DEFECT - Tire defect, immediately slow down and stop without making sudden movements of the p / wheel
  • EDC INACTIVE - electronic shock control system is not active
  • SUSP. INACT - Ride Height with Auto Leveling Disabled
  • FUEL INJECTION. SIS. - Have the injector checked by a BMW dealer!
  • SPEED LIMIT - You have exceeded the speed limit you have set in the trip computer.
  • PREHEAT - Do not start the engine until this message goes out (preheater is working)
  • FASTEN YOUR SEAT BRETS - Fasten your seat belts
  • ENGINE FAILSAFE PROG - Engine protection program, contact your BMW dealer!
  • SET TIRE PRESSURE: Set the prescribed tire pressure
  • CHECK TIRE PRESSURE - Check tire pressure, adjust if necessary
  • INACTIVE TIRE MONITORING - Malfunction in the tire pressure monitoring system, the system is inactive
  • KEY IN IGNITION LOCK - Left key in the ignition
  • Bremsflussigkeit [BREAK FLUID LOW]: The brake fluid level is approaching a minimum
  • Oeldruck Engine [ENGINE OIL PRESSURE] - Insufficient oil pressure in the engine. Appears if after starting the oiler does not turn off for 5 seconds (I ignore cases of penetration of the crankcase). The manual calls for stopping the engine immediately, but if you try to start it right away it will help. The next "cheaper" oil filter worth considering
  • Kuhlwassertemp [COOLANT TEMPERATURE] - overheating. Furnace on maximum, turn off the engine.
  • Handbremse lossen [PARKING BREAK] - release the parking brake!
  • Kein Bremslicht [WITHOUT BRAKE LIGHT] - no brake light. Rarely two lights come on.
  • Bremsley. Elektrik [BREAK LT CIRCUIT] - Blown fuse or brake light circuits.
  • Speed ​​limit [SPEED LIMIT]: You have exceeded the set speed

Not so bad messages

  • Bremsbelage [COATINGS BREAK]: The pads have worn out and the sensor has tripped. And change both.
  • Waschwasserstand [WINDSCREEN WASHER FLUID LOW] - Insufficient fluid level in the windshield washer reservoir. To complete.
  • 1 Bremslicht [BREAK LIGHT]: one brake light closed. We change the light bulb.
  • Abblendlicht [LOW BEAM]: The low beam is closed. See previous paragraph.
  • Rucklicht [TAIL LIGHT]: One of the rear lights is off. See previous paragraph.
  • Kennzeichenlicht [LIC PLATE LT] - One or both license plate lights are off. See previous paragraph.
  • Anhangerlicht [HZ] - Something is wrong with the warning lights on the trailer.

Not very good messages

  • Oelstandmotor [ENGINE OIL LOW]: The engine oil level is approaching the minimum. To complete.
  • Kuhlwasserstand [COOLANT LEVEL] - The coolant level is approaching a minimum. To complete.
  • Oeldruck Sensor [OIL PRESSURE SENSOR] - Malfunction of the oil pressure sensor.
  • Oelstand sensor [OIL LEVEL SENSOR] - Malfunction of the oil level sensor.
  • Check Control [CHECK CONTROL] is analogous to the Microsoft lexicon: General Protection Flaw. Immediately leave the vehicle by ejection. To start the ejection system, open the sunroof and fart hard into the heated cigarette lighter. (tell jokes). You must stop and turn off the engine.
  • Light and? [LIGHT ON?]: The driver's door is open when the lights are on.

Neutral message

  • Standlicht [HIGH LIGHT] - high light
  • Nebellicht vorn [FOG LIGHT] - front fog lights
  • A hint from Nebellicht. [ХЗ] rear fog lights
  • Betriebsanleitung [USER'S MANUAL] read the vehicle's owner's manual
  • Koffenraum Offnen [TRUNK OPEN] started moving with the trunk open
  • Tur Offnen [DOOR OPEN] - movement started with the door open

If there is a + on the board, then the bookmaker is complaining about more than one problem.

You can read them one by one by pressing Check Control. Note: Sometimes all brake lights, dimensions and license plate lights are closed by BC. It is treated by turning off the ignition and restarting the engine.

Decryption of Errors BMW Computer Board

Deciphering error codes on-board computer BMW

Deciphering BMW computer board errors

VERIF.FEUX AR — the tail light does not work VERIF.FEUX STOP — the brake light does not work VERIF.ANTIBROUIL.AV — the front fog lamp does not work air conditioning)

VERIFY LIG.LAVAGE - Washer fluid level

ENGLISH RUSSIAN

RELEASE PARKING BRAKE-Release parking brake CHECK BRAKE FLUID-Check brake fluid level STOP! ENGINE OIL PRESSURE - Stop?

CHECK STEERING FLUID LEVEL

DEFECTIVE TIRE - Faulty tire, reduce speed immediately and stop without jerking the rear wheel EDC INACTIVE - Electronic damping control system is not active SELFLEVEL SUSP. INACT-Inactive FUEL INJECTION self-levelling system. SIS.

Add a comment