Gear oil CLP 320
Oil description
Mineral gear oil CLP 320 is based on hydrotreated oils, which makes it not only effective, but also safe for various elements of complex equipment. Be sure to use in its production and multifunctional additive packages. They, in turn, are important for increasing such indicators as lubricating, anti-corrosion, and antioxidant qualities.
Additional chemicals help this grease to provide extreme pressure properties as well, which is especially important in heavy use of industrial equipment, where every part is subjected to high mechanical wear and friction.
Gear oil of the presented class meets international standards. It is marked according to DIN 51517.
Advantages
In the production of the presented line of gear oils, special attention is paid to the selection of additives. Such a complex of additives allows to significantly increase the lubrication efficiency in comparison with such a series as CLP 220.
The following advantages of lubrication should also be highlighted:
- The presence of a demulsifying component in the composition allows the use of the equipment even in conditions of high humidity and at the risk of water entering the gear oil.
- CLP 320's active ingredients help protect components from galling or corrosion, eliminating equipment breakdown, downtime and premature repairs.
- Antioxidant components make it possible to use this lubricant even in equipment where elevated temperatures and high loads are noted.
The presented characteristics significantly expand the scope of the CLP 320 gearbox.
Areas of use
Gear oils such as Shell Omala have proven that the higher the quality of the lubricant, the lower the cost of equipment maintenance. Therefore, only if it meets the specified international standards and requirements, we can say that the CLP 320 is approved for use in complex technology.
So, the presented class of oils has the following tolerances:
- Daniel.
- Sandvik.
- Wittman Battenfeld.
- Flender v.9 and others.
Approvals of the leading manufacturers of industrial equipment were obtained due to the following technical characteristics:
| Viscosity grade | 320 (according to the ISO system) |
| Viscosity index | 90-100 |
| Flash point | 250 °С |
| congelation point | -15 °С |
| Density | 0,9-1 g / cm3 |
Experts advise using CLP 320 oil in the following units:
- Gears in machine-type industrial equipment - metalworking, forging and pressing, woodworking machines, as well as in mining, oil, energy complexes.
- Mechanical and automatic drives.
- circulation systems.
The oil significantly extends the service life of the presented devices, increases their functionality, guarantees uninterrupted operation.
