Engine regeneration with Ceramizer
You can find a wide variety of products in automotive stores. engine oil additiveshowever, not all will be equally effective. First of all, you must consider famous brands accessoriesas well as well-proven measures such as Polish Ceramizer.
Ceramizer additive that can be used even in new engines, but is especially recommended for powertrains. with medium and high mileage. Why? Because in it - as one of the few additions - restoring properties of the engine.
Some may be surprised or even doubtful whether an oil additive can "Repair" of a worn out motor... However, the evidence for the effectiveness of Ceramizer is compelling and the manufacturer's experience has been validated by many users.
What are the effects of using Keramizer?
According to the manufacturer's information, Ceramizer:
- reduces oil consumption,
- reduces fuel consumption (from 3 to 15%),
- shuts down and levels the engine,
- equalizes the compression pressure in the cylinders,
- restores friction surfaces,
- makes it easier to start a cold engine,
- slightly improves the dynamics of the car.
How does Ceramizer work?
It might seem that such a versatile effect of the oil additive ... the result of the fantasy of a persecuted marketer. But no! The effectiveness of the Ceramizer has been proven in numerous tests. Ceramizer allows improve engine performanceand in many cases also avoid costly repairs, because restores friction surfaces during surgery.
It is worth understanding how this tool works. Its main property: ceramization... After the agent is added to the oil while the engine is running, the Ceramizer particles combine and diffuse with the metal particles moving in the oil. In fact, inside the engine a ceramic layer is formedwhich makes up for worn out parts.
The process of part regeneration and the creation of a ceramic layer occurs automatically. The benefits are already visible after 200 km from the moment the drug was added to the oil.
Ceramizer is interestingly illustrated with this archived test:
Driving without engine oil – Ceramizer Polonaise test
How to use Keramizer?
The ceramizer should be poured through the oil filler neck into a warm, but muffled engine. Usually just one time the contents of one dispenser are poured – the exception is new powertrains (up to 50 km) in vehicles with a sump capacity of up to 8 liters. Then pour in half of the portion.
After filling with Ceramizer, screw the oil plug and start the engine, leaving it idling for about 15 minutes. After this time, we can use the car as usual, but the first 200 km is recommended. do not exceed engine speed 2700 rpm (or speed 60 km / h). If this gives us too much inconvenience, we can cancel this item by leaving the car with the engine running for four hours. This time can be divided into smaller stages, based on the assumption that one hour corresponds to a distance of 50 km.
After driving 200 km (or after four hours of idling), there is no need to follow any special rules. The cermet layer will be formed as a whole. per 1500 km. The only thing to remember is not to change the oil at this time.
Video instruction below:
The ceramics can be purchased at the Nocar store.
Photo Ceramizer
