Repair and replacement of the VAZ 2110 stove

In this video, we will analyze the analysis of the stove on a VAZ 2110 car. First, we will remove the insulation. So, we removed the insulation, got directly to the stove body. It is all in plastic, on one side there is an air filter, to the right is the fan, and even to the right is the heater radiator itself, which we need to change. In addition to removing the insulation, you will also have to remove the air intake, wipers, well, in general, all this ski. We unscrewed the ski and took off. After that, you need to disassemble the plastic case, which actually contains everything we need. We unscrew all the screws and use a screwdriver to snap off all the latches.

After we cut the body in half, it took about one hour. And now the radiator itself has become available to us. Now it remains to remove it from the case. We release the clamps on two hoses that go to the stove and one hose that goes from the expander barrel, and disconnect. By the way, before removing the hoses, you must definitely drain the antifreeze. Before buying a new radiator, be sure to find out what kind of radiator you need, because they are different. For more detailed instructions on the repair and replacement of the VAZ 2110 stove, see the video below.

Putting the whole thing into place should be in the reverse order, it should take no more time than dismantling, if everything goes well without unforeseen circumstances.