Rating of stands for a car with a load capacity of up to 2 tons

Refuse homemade products: a wooden car stand can fail. Structures made of shaped pipes are more reliable, but even here you may not calculate the tensile strength of the material.

During suspension repairs, oil changes, the car is installed on a flyover or inspection hole. When servicing the wheels, they use mechanical or hydraulic car lifts, manual jacks. However, the automotive accessories industry also produces special repair stands. The gadget won the driver's sympathy.

Stand Matrix 51620 (2 t)

Having raised the car on a jack to hang the wheels, drivers immediately come up with home-made insurance: there is always a risk that the car will fall from a height. Bricks, old tires, wooden blocks are used.

With stands for cars, you are relieved of the need to look for improvised material to secure the lift during engine repair.

Stand Matrix 51620 (2 t)

Components of the car stand Matrix 51620 (2 t):

• The steel case is made by stamping, which is more reliable than welded options. The design is expanded to the base, rests steadily on 4 legs.
• A movable support bar is a place on which the car body rests.
• The rotary handle for adjusting the height of the car is equipped with a rubber pad against slipping the user's hand.
• A toothed bar is needed to fix a given height.

Matrix 51620 with a weight of 5,175 kg can withstand vehicles weighing up to 2 tons. The list of such cars includes the entire fleet of passenger cars of the Russian market, including powerful SUVs. The minimum lifting height is 275 mm, the maximum is 420 mm.

You can buy safety car stands in online stores at a price of 1250 rubles.

Stand “BelAvtoKomplekt” BAK.39001 (2 t)

If you need to work under the bottom of the car, and you do not have an inspection hole in the garage, use the safety stand BAK.39001 (2 tons). In the kit, disassembled, there are one-piece cast metal columns (2 pieces).

Stand “BelAvtoKomplekt” BAK.39001 (2 t)

How to install the car stand:

1. Unpack the box, assemble both structures. To do this, insert the toothed belt into the body, fix it with the handle.
2. Jack up the car.
3. Install the holders at the same height under the edge of the threshold or the wheel axle, as there are special recesses on the support rod.

Now you can fearlessly crawl under the car and do repairs.

The design with a size of 226x211x321 (LxWxH) and a weight of 4,83 kg will withstand crossovers, sedans, station wagons. If necessary, you can raise the car from 280 mm to 420 mm.

Car safety stand “BelAvtoKomplekt” BAK.39001 (2 tons) costs from 1400 rubles.

Stand AUTOPROFI JS-02 (2 t)

The design of this gadget is somewhat different. The triangular base of the car stand AUTOPROFI JS-02 (2 t) ensures good stability on a flat surface. The length of the sides of the triangle is 130 mm, the height of the product is 300 mm, and the weight is 3,19 kg. Dimensions allow you to take the device with you on trips, because on the road there are troubles that require underbody repair work. When stored and transported, the compact mechanism does not take up much space in the trunk.

Stand AUTOPROFI JS-02 (2 t)

The stand for the car will raise the transport, regardless of the clearance, to a height of 270 mm to a maximum of 360 mm. There are three positions for lifting the car: the movable round rail has the same number of holes and a locking pin.

The body is made of durable welded metal, powder-coated in red. All-weather fixture: temperature changes do not affect performance.

The price of the product for a set of two safety columns is from 1500 rubles.

Stand Stels 51621 (2 t)

Users leave feedback on fixtures on the forums. In the ranking of the best - adjustable stand Stels 51621 (2 t). A powerful one-piece cast device with a toothed rod holds a two-ton load at a height of 290 mm to 420 mm while you change tires, service hubs, brake pads. The serrated bar is equipped with an additional safety pin, which takes safety to another level.

The reliability and quality of the equipment have been tested by the manufacturer on special stands. Car stands made of metal with a high tensile strength are used not only by motorists, but also by professionals at service stations.

Stand Stels 51621 (2 t)

Product dimensions - 200x190x135 mm, weight - 5,16 kg. The base of the device is equipped with platforms that do not allow the structure to go into the floor covering. This circumstance eliminates the warping of the car during repairs.

You can buy a safety stand for a car for 1700 rubles.

Stand “Kraton” SS-2.0 (2 t)

Refuse homemade products: a wooden car stand can fail. Structures made of shaped pipes are more reliable, but even here you may not calculate the tensile strength of the material. On sale there are finished products that have been tested at factory professional stands. Holder "Kraton" SS-2.0 (2 t) is used by rally athletes, masters in services.

Stand “Kraton” SS-2.0 (2 t)

Working parameters:

See also: Set of devices for cleaning and checking spark plugs E-203: characteristics

• dimensions - 350x210x200 mm;
• weight - 5,750 kg;
• load capacity - 2 t;
• pickup height - 278 mm;
• the maximum lifting height is 420 mm.

Case made of hardened steel on 4 legs, with platforms. Protected against corrosion by powder coating. The handle of the device is equipped with a rubber pad that prevents slipping of the worker's palm. The toothed bar ends with a support with a recess designed for a wheel axle or a special nickel under the car body. Oblique teeth allow you to adjust the height, depending on the type of repair.

The price of "Kraton" and SS-2.0 (2 tons) - from 1740 rubles.

TOP-7. The best rolling jacks for 2t - 3t (for cars, SUVs). Rating 2020!