Rating of Shimano Hollowtech 2 bottom bracket pullers: TOP-5 models according to owners reviews
Content
The English tool is made of alloyed steel. This Hollowtech 2 puller is designed for heavy loads. The unscrewed bottom bracket cup is reusable. The handle of the device is ergonomic, covered with a rubber layer. The kit includes a magnetic nozzle designed to dismantle the connecting rod cap. The working head is closed, the pharynx does not open, firmly grasping the cartridge body or nut when additional force is applied.
The pedal assembly of a bicycle experiences significant loads during operation. When repairs need to be made, a Hollowtech 2 puller is needed. This tool will help reduce the risk of damaging components during installation, so every bike owner should buy one.
5th place: CYCLO Hollowtech II carriage puller
The English tool is made of alloyed steel. This Hollowtech 2 puller is designed for heavy loads. The unscrewed bottom bracket cup is reusable.
The handle of the device is ergonomic, covered with a rubber layer. The kit includes a magnetic nozzle designed to dismantle the connecting rod cap. The working head is closed, the pharynx does not open, firmly grasping the cartridge body or nut when additional force is applied.
Features | |
Suitable for | Hollowtech II, Truvativ GXP, FSA |
Material | Steel, alloyed |
4th place: Puller 6-190027 carriage YC-27ST Hollowtech II
Hollowtech II bottom bracket puller model 6-190027 from Bike Hand protects the threads in the frame cup from damage. The handle of the tool is covered with rubber, the shape is curved to provide a more comfortable and secure grip.
Suitable for octagonal plug with hollow shaft, there is a special recess for hex keys.
Features | |
Suitable for | Shimano, Hollowtech II, GXP |
Material | Steel |
3rd place: Birzman Hollowtech II carriage puller
Birzman's Hollowtech 2 Carriage Remover can be used to make repairs easier. The special shape, similar to the wrench of the cap head, allows you to distribute the force and facilitate the dismantling process. Design feature in the presence of 16 slots.
Features | |
Suitable for | GXP, Hollowtech II, FSA |
Material | High quality steel |
2nd place: Bike Hand YC-303BB carriage puller
The Hollowtech 2 universal puller is designed to work with assemblies manufactured by different companies. The head is grooved, which makes it easier to grip and further use. You will need a 1/2” wrench to unscrew the bottom bracket. The rubberized handle fits perfectly in the palm of your hand.
The device is used for Lockrings, which are distinguished by sixteen internal slots.
Features | |
Suitable for | Race Face, Shimano, Phil Wood, Campagnolo, FSA, SRAM, Truvativ, Chris King |
Material | Steel, alloyed |
1st Place: ParkTool Bottom Bracket Puller for Shimano Hollowtech II/PTLBBT-9
To securely grip the nut, the design provides twelve protrusions in the shape of a semicircle. The outer part of the Shimano Hollowtech II bottom bracket puller from ParkTool is serrated to make it more comfortable to hold in your hand. The tool is required to service components from Rotor BSA30, Zipp Vuma, Face Cinch and other manufacturers.
When working, it is recommended to use a torque wrench or a 3/8” socket tool. The inner diameter is 46 mm.
Features | |
Suitable for | Shimano, FSA, SRAM, Hollowtech II, Chris King, Campagnolo Ulta-Torque, Race Face, Truvativ and more |
Material | Steel |
Tool types
If there is extraneous noise, knocking, or if the pedals are jammed or play is observed, it is necessary to check the carriage in order to eliminate the defects that are found there. A special toolkit helps to carry out the entire cycle of work. Hollowtech II carriage pullers are represented by different types of fixtures:
- Hollow metal cylinder. The back part is distinguished by a hexagonal protrusion, thanks to which it is captured with a wrench, and there are teeth on the end surface. There is usually an additional square hole to center the tool on the hub axis.
- A stamped fixture with a working head where profiled protrusions are located. The handle is usually grooved or rubberized. A wrench is not needed for such a system. Pressing the puller tightly, the master at the same time transfers the force to the lever.
- Adjustable wrenches that have interchangeable pins. Versatile because they are suitable for carriages of different manufactures. The contact rods enter the working area of the tool. The handle connects to the grip. There is a mechanism to help adjust the distance between the pins.
It is easy to choose the right option in online stores and order with delivery to any corner of Russia. Certain types of tools are designed only for nuts of the same type, so when choosing your own, you should be more careful about the description and characteristics of the models.