Ball joint puller: work, application and price
Content
A ball joint puller is an important tool for safely removing steering ball joints. Also known asball joint puller, it will pull the ball joints with a lever to avoid damaging them.
🛠️ How does the ball joint puller work?
A ball joint remover exists because the steering ball joints are inherently difficult to remove, and because of their connection to the steering rods and steering rack... Indeed, the ball joints are held by tapered shank which crosses the tie rods as well steering eye... These parts are held together with a nut, pin and washer.
The ball joint remover should only be used on one ball at a time so as not to affect parallelism vehicle by removing several ball joints at the same time. It works using Leverage which allows the pressure in the ball joint to be reduced without requiring operator force or damaging one of the mechanical parts.
The best selling ball joint puller models are: universal because they are all the same size. For heavy duty vehicles or sports cars only, the ball joint puller should be larger. This makes it possible, in particular, to apply high lifting force easy to remove the patella.
It is important to note that there is no alternative tool for removing the ball joints from their housing. Indeed, only the ball joint puller allows this maneuver to be performed with complete safety for the technician and the parts associated with your vehicle's steering system.
👨🔧 How to use the ball joint puller?
If you have a ball joint puller and would like to remove one or more steering ball joints, you can follow our step by step guide.
Required material:
- Protective gloves
- Protective glasses
- Toolbox
- Jack
- Ball joint puller
Step 1. Raise the car
To access the steering ball joints, the vehicle must be jacked up. Be sure to secure the assembly to the latter to avoid instability of your vehicle or lack of access to the hinges.
Step 2: unlock the patella
To unlock it, you will need to unscrew the nut that secures the ball joint. Then it will be necessary to remove the washer and pin holding the ball joint with the steering rod and the steering eyelet.
Step 3. Use leverage
Install the ball joint puller onto the ball joint by inserting a fork between the dust boot and the steering arm eyelet. The pressure is at the end of the tapered portion of the ball joint, so you can gently but securely tighten the ball joint remover lock nut.
Step 4: Remove the ball joint
When the ball joint is loose, you can remove it by slightly pulling on it. If your ball joint remover has a threaded portion, the gap size of the jaws can be adjusted before installing them on the ball joint.
🔨 Can the axial ball joint be removed without a puller?
The axial ball joint can be removed without a puller, but this unsafe maneuver takes a lot of time and effort. After unlocking the ball joint by unscrewing the nut, you will have to turn off the steering eye vigorously tapping with a hammer on the conical axis of the patella. To absorb shock, use one of your tools and attach it directly to the ball joint to hold it in place.
This method requires proficiency in auto mechanics and close attention to ball joint and surrounding details. If you push too hard on the axle, you can damage several elements related to management your car and replacement will be inevitable. Therefore, you will have to go to the garage and pay a higher bill for the parts you damaged.
💸 How much does a ball joint puller cost?
The ball joint puller is the tool of choice for automotive mechanics professionals. If you are used to maneuvering your vehicle yourself, you can purchase a ball joint puller. They are sold from car suppliers or directly online if you want to compare prices. This is a tool that costs 10 € and 100 € depending on the models and their size.
Ball joint remover is an essential piece of equipment for replacing vehicle steering ball joints. It provides operation and protects the parts attached to the ball joint from damage during removal. If you are looking for a reliable steering ball joint replacement garage, use our online comparator!
