Wheel bearing puller: role, application and cost

Wheel bearing puller is also known ashub remover or a rigid bearing. This mechanical tool allows, as the name suggests, the extraction of various mechanical parts associated with the wheels of a vehicle. In this article, you will find important information about the wheel bearing puller: its role, how to use it, where to buy it, and what is its average selling price!

🚘 What is a wheel bearing puller?

A wheel bearing puller not only removes the wheel bearings from your vehicle, but also le nodesthen drums or brake discs. There are currently three different models of wheel bearing puller:

• Wheel bearing puller with grip or hook : This is the most commonly used type of extractor, it is considered universal as it is designed to remove any parts. Equipped with two, three or four claws, depending on the model, these claws can be inward, outward, or fully reversible. Thus, thanks to them, the retrievable part can be captured and then easily retrieved thanks to the inertial system;
• Wheel bearing puller : The sleeves are inserted around the metal ring and then will be placed around the mechanical part that will be removed from the vehicle. It is also a system of inertia;
• Hydraulic wheel bearing puller : The hydraulic cylinder replaces the clamping screw of the gripper or liner stripper, giving it more force to remove a specific element. This type of extractor is more suitable for very large engines or agricultural machinery.

A wheel bearing puller is an indispensable tool in an auto mechanic workshop. Indeed, this allows wheel and brake maneuvers to be carried out in complete safety and faster.

👨‍🔧 How to use the wheel bearing puller?

If you've just purchased a wheel bearing remover and want to use it on your vehicle to replace or remove a part, follow our step-by-step guide.

Required material:

Wheel bearing puller

Toolbox

Protective gloves

Jack

Candles

Step 1. Disassemble the wheel

Raise the vehicle with a jack and jack so that the wheel can be removed. Using a torque wrench, remove the wheel from your vehicle and you will gain access to the wheel hub.

Step 2: Install the wheel bearing puller.

The wheel bearing puller must be centered in line with the propeller shaft. Then place its tabs in the wheel mounting holes.

Step 3: Tighten the wheel bearing puller.

Tighten the wheel bearing puller crank to remove the universal joint from the hub. You can then access the wheel bearings and remove them using the toolbox.

Step 4: assemble the wheel

When you have replaced or released one of the parts, you can reinsert the different parts and then reassemble the wheel. It should be noted that when assembling the wheel and its bolts, the tightening torque of the wheel of your car must be observed. Finally, lower the vehicle off the jack.

📍 Where to buy a wheel bearing puller?

A wheel bearing puller is a tool that can be purchased from specialized stores. So it's about tool shopsthen auto centers (Norauto, Feu Vert ...) or several internet sites specializes in automotive tools.

So don't hesitate compare prices, brands and customer reviews on wheel bearing pullers to make a selection before purchasing.

💰 How much does a wheel bearing puller cost?

The price of a wheel bearing puller will range from one to three depending on the model chosen, clamping capacity and brand. On average, the smallest claw or clamshell models are sold between 15 euros and 20 euros. However, if you take larger models, you will need to 50 € and 80 €.

For hydraulic wheel bearing pullers, prices will be much higher. Indeed, since they are equipped with more important technology, their purchase price is between 100 € and 300 € for more complex models.

A wheel bearing puller is an indispensable tool for professionals in the automotive sector, but also for motorists who are used to performing operations on their car. After all, if you yourself will carry out maintenance of your car, for example, replacing a wheel bearing, this equipment will become indispensable for you!