Self painting car bumper
Content
If the price of painting a car bumper is too high for you, then painting your car bumper at home is not difficult. It is only necessary to thoroughly study the described information and properly prepare.
If you decide to paint the bumper of the car with your own hands, follow the instructions exactly. The body of the car requires quite gentle handling, despite the fact that it is made of metal. Any mistake will lead to an increase in the cost of repairs. Therefore, it is recommended to carefully study the materiel before work.
How much does painting cost
The price of painting the bumper of a foreign car in Russian car services varies. The cost depends on the type of damage, the number of scratches and cracks, the material. Be sure to take into account the class of the vehicle, the type of coverage, the need for preparatory measures. It can cost from 1000 to 40000 rubles.
The price of painting the bumper of a foreign car
Here, for example, is how the price of repairing the front buffer is formed:
- Determine the preliminary scope of work. They find out what operations should be carried out - to clean from dirt, putty, primer. All this is estimated in the range of 500-2500 rubles.
- Consider the degree of damage and the method of processing. A partial restoration will cost about 1500 rubles, and a full one will cost twice as much.
- Choose the type of paint. Painting without dismantling the body element is estimated below, if it is necessary to paint with repairing cracks and applying primer, it is higher.
Necessary materials
The right materials and tools are critical to the success of any job, and even more so, such as painting a car bumper. Here is what you will need to prepare without fail:
- special degreaser for plastic - required for application after each stage of grinding;
- 200 grams of primer (primer);
- personal protective equipment - goggles, mask;
- sandpaper (abrasive paper) with grain sizes 180, 500 and 800;
- paint spray gun;
- enamel.
To prepare and paint the bumper, you will need various preparations
Preparatory work
In any case, almost everything depends on preparation. If you start the work wrong, then nothing really will come of it. It will take extra time and nerves, and the most unpleasant thing is that you can damage the surface even more. To paint a car bumper with your own hands, you need to take on a lot of responsibility.
Choice of painting method
For the correct selection of the method of painting, you must be able to determine the condition of the bumper of the car. Usually there are 5 types of work surface before direct staining:
- naked - here the work is the most, because it is necessary to remove the factory grease for forms, thoroughly rinse the body kit on both sides and apply an adhesion promoter;
- covered with primer - first, the nature of the primer is clarified (adhesion enhancer or just epoxy), then the layer is either removed or polished;
- enameled, new condition - polished and degreased;
- used condition, painted - you need to carefully inspect the element for damage, and if there are any, then first repair them;
- a product made of structural plastic - it is washed more thoroughly and always with a soft brush.
Step-by-step instructions for carrying out painting work
To properly paint a car bumper, it is highly desirable to add a plasticizer to standard acrylic primers, enamels and varnishes. This is done in order to give the material elasticity, as well as maintain integrity - the paint will not crack when the plastic is deformed.
To clean and sand the bumper, use a hand-held pneumatic grinder.
Below is a guide to working with the new bumper:
- Rub the body element with an abrasive of 800 grit in order to get rid of dirt and small bumps.
- Clean the buffer from grease.
- Cover with two-component acrylic in two layers.
- Wash with sandpaper 500 grit so that the paint sits on the surface better.
- Blow out with compressed air.
- Degrease.
- Apply the first coat of enamel.
- Degrease again.
- Put at intervals of 15-20 minutes a couple more layers of color.
- Apply varnish for a final gloss.
An old or used body kit is painted like this:
- Rinse the item thoroughly.
- Clean old enamel down to primer using P180.
- Blow out with compressed air.
- Clean with anti-silicone.
- Eliminate defects with a special putty for plastic.
- Sand after drying with abrasive 180.
- Carry out finishing putty.
- Rub with sandpaper 220 to obtain smoothness.
- Lay a quick-drying one-component primer.
- Sand with 500 grit.
- Degrease the surface.
Touch up the bumper
Next, paint is applied, as in the first case. It is extremely important to carry out all work on a clean bumper, so it should be thoroughly washed beforehand. You can use a brush with hard or soft hair (structural buffer).
How to paint a bumper on a car
Touch up the bumper on the car yourself - how to freshen up, apply makeup. Previously, it was much easier to do this, since the structural element was specially prepared so that after minor accidents it could be corrected and tinted on its own. After the eighties, the bumpers became plastic, they began to be connected to the skeleton. And even later — to do a body color.
The most difficult task if you decide to paint over a scratch on a car bumper with your own hands is the selection of a shade. It is easier to do this with a catalog available from most sellers on the market. However, it will be more difficult for owners of metallic and mother-of-pearl cars, since it will not be possible to restore the bumper with the help of repair or aerosol compounds. It will need to be repainted in its entirety.
Paint over a scratch on the bumper of the car with your own hands
When working on the restoration of the buffer, it is necessary to prepare not only the paint of the desired color and shade, but also a special primer with varnish. Before applying the composition, it is recommended to do a test on a separate piece of plastic. This will allow you to determine the ideal spray distance, jet velocity and other factors that contribute to the application of enamel without drips.
When can I wash my car after painting?
Premature washing of a freshly painted vehicle carries the risk of surface clouding and other unpleasant consequences. Although the varnish hardens quickly - already on the second day, the inner layers of primer and paint dry for at least 1 month. Of course, this depends on the thickness of the layer, the materials used and the method of drying carried out.
Washing is allowed to be carried out after two weeks, since the top layer is varnish, by this time it dries well. However, the procedure must be carried out with great care, using non-contact cleaning methods. At least the first two or three times.
The inventory for washing a car after painting the bumper should definitely not include a brush. Even if she has soft bristles, this does not guarantee the safety of the paintwork. It is also forbidden to use aggressive chemicals, especially if its composition includes vinegar, sodium silicate, soda.
When can I wash my car after painting?
Instead of a brush, it is better to take a new sponge. It is desirable to rinse it more often in clean water. Of the detergents, a wax-based car shampoo is suitable. Such a protective coating will create a durable film on a freshly painted surface. It will keep the plastic from burning out.
The following are the things you should not do with a freshly painted car during a car wash:
- rinse with water immediately after a trip on a hot day - you have to wait in the shade for about 10-15 minutes;
- wash the car in the sun - the paint will fade unevenly;
- carry out the procedure in the wind - dust and small litter will become an abrasive and scratch the new varnish;
- use a high-pressure cleaner - you can only wash by hand.
If the price of painting a car bumper is too high for you, then painting your car bumper at home is not difficult. It is only necessary to thoroughly study the described information and properly prepare.
