Swedish line of anticorrosive agents "Noxudol"
Noxidol is a Swedish-made product that is designed for anti-corrosion and anti-noise treatment of a car. The products of the Noxudol line, in addition, well resist the adhesion of sand particles, salts and dirt to the bottom. The effectiveness of vehicle treatment with noxidol is confirmed by strict Finnish and Swedish standards.
Advantages
The Noxudol range includes everything from highly filtered corrosion-resistant oils to products designed for anti-corrosion treatment of the chassis. The developer claims that during long-term tests it has been established: Noxidol lags behind in all grooves and gaps, and corrosion resistance remains the same. Noxudol products are available in two versions - with and without solvents. In the latter case, the environmental performance of the product increases. These are the anticorrosives Noxudol autoplastone, Noxudol 300, Noxudol 700 and Noxudol 3100 (their manufacturer, like the anticorrosive mercasol, is the Swedish company Auson AB).
Features of the Noxudol range:
- The absence of toxic components in the composition.
- Preservation of the penetrating ability of the components of anti-corrosion protection for a longer time.
- The absence of unpleasant odors, to which people suffering from various forms of allergies are sensitive.
- Reducing harmful emissions into the atmosphere due to the reaction of oxygen in the air with substances that make up solvents.
Let's take a closer look at the characteristics of some Noxudol anticorrosives.
Nokhudol 300
An aerosol-type preparation that does not contain solvents. Possesses the increased density and thixotropic. A product used as a corrosion preservative with surface protection additives that increase resistance against mechanical shocks.
The absence of solvents slows down the drying of the composition, which lasts about a day. The film dries completely in 3-7 days, depending on the ambient temperature and the thickness of the layer.
Noxudol 300 is recommended for corrosion protection of car arches and underbody parts. The effectiveness of the application of the composition has been proven even with a thin surface layer. Noxudol 300 is also used as a preservative lubricant for long-term storage in air of various industrial products, which include steel or cast iron products. The composition of the components ensures that chemically active salt mixtures intended for anti-icing do not penetrate to the metal surface. This is due to the good water repellency of the drug.
Nokhudol 700
Produced in aerosol form, it is a rust preventive and solvent free product. Compared to other anticorrosive agents, it provides 3-4 times more effective penetration into cavities, gaps and crevices in the vehicle body. Noxudol 700 contains compounds characterized by low viscosity, as well as additives. They allow the use of Noxudol 700 at normal ambient temperatures. When applied, an elastic film is formed, which contains wax. This film is distinguished by increased hydrophobicity and excellent anti-corrosion performance.
Noxudol 700 is recommended for anti-corrosion treatment of various cavities and crevices in the car body. The agent is also effective as a conservation protection for parts and components of equipment that are prone to corrosion.
Liquid soundproofing Noxudol 3100
It is produced in barrels or plastic containers of various capacities - from 200 to 1 liter. In addition to anti-corrosion abilities, using Noxudol 3100, you can significantly reduce the level of noise and vibration in the car. Efficiency of application is achieved due to the high damping coefficient and lower (approximately 2 times) density compared to similar coatings based on bitumen.
In addition to its low weight, the compound is very easy to apply, for which you can use a spray gun or a regular brush. With a single spraying, the thickness of the protective film is about 2 mm. It is a good sound absorber. Noxidol 3100 is usually coated on metal or plastic parts with a thickness of 0,5 to 5 mm.
Noxudol 3100 is highly regarded by manufacturers of ships, trains and other vehicles.
Dinitrol or noxidol?
Comparative tests of two anti-corrosion preparations have confirmed that the lower part of the car body should be treated with wax or reinforced compounds that have better resistance to external loads. A lighter density product is more effective for interior panels where high surface ductility is required for rust protection.
Therefore, Noxudol is more suitable for the treatment of internal cavities, and Dinitrol is more suitable for application to the bottom of the body. However, some reviews indicate that tests conducted by specialists from the Canadian aircraft manufacturer Bombardier showed: Dinitrol is more effective for cars moving in an urban environment. This fact is associated with increased humidity, when the air contains excessive doses of chemically aggressive gases - nitrogen oxides and carbon.
