Top 10 spray guns for car painting
Content
- Network airbrush BOSCH PFS 3000-2
- Airbrush STAYER PROFESSIONAL AirPro HVLP
- JL 827 HVLP (JH827) JETA PRO Spray gun with top plastic tank 0,6 l, nozzle 1.7
- Pneumatic spray gun Matrix 57315
- Pneumatic spray gun PATRIOT LV 162B
- Pneumatic spray gun Stels AG 950 LVLP 57367
- Pneumatic spray gun Pegas pneumatic 2707
- Air spray gun VOYLET H-827 1.4 mm
- Pneumatic spray gun Fubag MASTER G600/1.4 HVLP with gearbox
- Network airbrush Bort BFP-280
If you need to buy a network spray gun for painting cars, then you should look at the top three models in this rating and read the reviews. When choosing a tool, it is important to consider not only performance, but also build quality. Then the product will be able to perform finishing for a long service life.
Finishing the car body is effectively done with a spray gun. The rating of spray guns for painting a car will help you choose the right tool. This review presents the TOP 10 models according to users.
Network airbrush BOSCH PFS 3000-2
The tool is suitable for spraying mixtures of any viscosity using ALLPaint technology. The nozzle of the model is adjustable in 3 positions and has an optimal diameter. Thanks to this, it is easy to apply the paint in an even layer without smudges and without strong fogging.
The Constant Feed tank guarantees a constant supply of liquid solution, regardless of the height of the atomizer. The device must not be used with alkaline and acidic materials.
Technical specifications | |
Spray method | Pneumatic |
Application speed | 2 m²/min |
Power | 650 W |
Tank volume | 2 l |
dimensions | X 357 327 279 mm x |
The weight | 2,8 kg |
Advantages:
- The design is easy to disassemble and clean after work.
- There is a setting for ink supply, air flow and spot shape.
- Support for 2-step mode for wall and wood processing.
Disadvantages:
- Short hose.
- Inconvenient location of the filter cover.
- Do not work in explosive areas.
Airbrush STAYER PROFESSIONAL AirPro HVLP
The model works on the HVLP (High Volume Low Pressure) spray system. That allows you to transfer up to 70% of paintwork materials to the surface with minimal formation of an aerosol cloud. At the same time, paint consumption is reduced by up to 30%.
Technical specifications | |
Device type | Air |
Air consumption | 210x135x132 mm |
Operating pressure | 3-4 Bar |
Tank | 0,6 l |
Dimensions | X x 21 13,5 13,2 cm |
Weight | 0,83 kg |
Pros:
- drop-resistant design;
- sustainability;
- availability for storage in a suspended state;
- can be used in fire hazardous areas;
- adjustment of pressure, shape of the jet and stroke of the trigger.
Cons:
- the nozzle does not hold well (glued to the plastic);
- nozzle diameter cannot be adjusted.
JL 827 HVLP (JH827) JETA PRO Spray gun with top plastic tank 0,6 l, nozzle 1.7
This universal tool is designed for spraying synthetic and acrylic enamels, varnishes, water-based paints, fillers, primers. The model is equipped with a chrome-plated shockproof body and an ergonomic handle that provides a comfortable grip. Due to the low weight of the product, the hand does not get tired for a long time during prolonged work.
Technical properties | |
Spray method | HVLP |
Pressure | 2-3 atmospheres |
Air inlet | 1 / 4M inch |
Tank | 0,6 l |
Air consumption | 350 l / min |
Net weight | 0,86 kg |
Advantages:
- There is a function to customize the shape of the torch.
- Protection against overloads and overheating.
- Sturdy metal construction.
- Special hole in the case for suspension.
- Long service life (from 12 months).
Disadvantages:
- The torch regulator has a play of 1 cm.
- The product is difficult to disassemble for washing after work.
Pneumatic spray gun Matrix 57315
This model of the German brand has an all-metal construction. The handle has special protrusions that prevent the product from slipping out of the hands. The liquid mixture is supplied to the gun using an air compressor. The device comes with additional nozzles for surface treatment with paints and varnishes of different viscosities.
Technical properties | |
A type | Pneumatic |
Maximum air consumption | 230 l / min |
Torch diameter | 20-250 mm |
Maximum pressure | 4 Bar |
dimensions | X 150 115 240 mm x |
Weight | 0,76 g |
Pros:
- 3 replaceable nozzles with a diameter of 1.2, 1.5, 1.8 mm.
- Aluminum tank 1 l.
- Spray paint with less than 15% loss.
- Convenient trigger position.
Cons:
- The top cover is not fixed, so the device can only be used vertically;
- Poor-quality nipple connection of the tank (flows from the thread).
Pneumatic spray gun PATRIOT LV 162B
The tool is durable and lightweight, as it is made of aluminum alloy. An iron tank with a volume of 1 liter is placed at the bottom of the body of the case. Spraying paint is carried out using LVLP technology (Low Volume Low Pressure) at a maximum pressure of not more than 4 atmospheres.
Technical specifications | |
Location of the paint container | Bottom |
Performance | 400 l / min |
Nozzle diameter | 1,5 mm |
inlet fitting | 1 / 4F inch |
Width currents | 120-220 mm |
The weight | 1,2 kg |
Advantages:
- Quick coupling Rapid (EURO).
- The presence of regulation of the supply of air and paint.
- No mains power required.
- High-quality assembly (factory warranty 1 year).
Disadvantages:
- Fragile nozzle (breaks easily).
- The pump poorly sucks up the rest of the mixture from the bottom of the tank (5-7 ml remains).
Pneumatic spray gun Stels AG 950 LVLP 57367
The model is a construction of a monolithic aluminum alloy. The product works at the expense of compressed air from the compressor on the LVLP technology. The average paint consumption per minute is 165 ml. The spray gun with the top tank is equipped with a system for adjusting the air flow, pressure and shape of the torch.
Technical specifications | |
Principle of operation | Air |
Pneumatic connector | 1/4 |
Paint consumption | 190 ml / min |
Paint tank volume | 0,6 l |
Pressure | 3,5 Bar |
Weight | 0,6 kg |
Advantages:
- The kit includes a brush for cleaning and a universal key.
- Sprays silently.
Disadvantages:
- Difficulty installing a pressure regulator.
- Requires a compressor to operate.
Pneumatic spray gun Pegas pneumatic 2707
This is a budget high pressure spray gun. The device works through a pneumatic network or an air compressor. A standard 1/4” input is used for connection. The paint reservoir is placed on top of the spray gun. Its capacity is 600 ml liquid solution. The shape of the torch can be easily adjusted by turning the nozzle.
Technical specifications | |
Device type | Pneumatic |
Operating pressure | 3,5 atmospheres |
Air consumption | 225 l / min |
Nozzle diameter | 1,5 mm |
paint tank | 0,6 l |
Dimensions | X x 12 23 15 мм |
Pros:
- Wide range of adjustments.
- Needle, nozzle nozzle are made of brass alloy.
- Compact size.
- Comfortable grip.
Cons:
- The nozzle is only 1,5mm in diameter.
- The price of the repair kit is equal to the cost of the device.
Air spray gun VOYLET H-827 1.4 mm
This professional spray gun is from the Chinese company Ningbo Lis Industrial, which specializes in painting equipment. The model works on HVLP technology, which allows you to evenly transfer up to 70% of the paintwork material to the surface. For corrosion resistance, the nozzle is made of brass and the body is made of anodized metal.
Technical properties | |
Principle of operation | Air |
Power | 650 W |
Performance | 150 l / min |
Nozzle diameter | 1,4 in |
Dimensions | 340 x 230 x 220 mm; |
The weight | 1,4 kg |
Advantages:
- Easy to use.
- Build from quality materials.
- Tank with replaceable filter.
Disadvantages:
- Insufficient length of the power cable (2.5 m).
- Small tank volume (0,6 l).
Pneumatic spray gun Fubag MASTER G600/1.4 HVLP with gearbox
The model is designed for finishing work on metal, wood and other materials. The tool is equipped with a plastic tank with a volume of 0,6 liters and a pressure gauge that allows you to adjust the pressure during painting. When applying coatings, the loss from spraying is no more than 15%. The air flow and the shape of the jet are adjusted using the "twists" on the device body.
Technical specifications | |
Spray system | HVLP |
Paint consumption | 190 ml / min |
Air consumption | 198 l / min |
Thread | 1 / 4 " |
Length x Width x Height | 130 x 150 x 230 |
The weight | 1 kg |
Advantages:
- Minimal mist formation during painting.
- The tank does not leak when turned over.
- Manometer included.
Disadvantages:
- There are no adapters in the kit for a quick release nozzle.
- Weak needle (constantly breaks).
- Uncomfortable little handle.
Network airbrush Bort BFP-280
This universal electric tool is the development of German specialists. The atomizer is made of inert plastic, the nozzle is made of brass and the internal parts are made of stainless steel. To reduce the cost, the product is made in China. The model works on low pressure technology while creating a large volume of air, which allows you to transfer coatings to the surface with an efficiency of up to 80%.
Technical specifications | |
Device type | Электрический |
Power | 280 W |
Performance | 240 l / min |
tank capacity | 0,7 l |
Length x Width x Height | X 360 310 110 mm x |
Net weight) | 1,38 |
Pros:
- Ergonomic handle with balanced center of gravity.
- Built-in filter to prevent clogging.
- Overheat resistance.
- Ershik in the set.
Cons:
- The small power of the product is not suitable for volumetric tasks.
- Cannot be used in fire hazardous areas.
If you need to buy a network spray gun for painting cars, then you should look at the top three models in this rating and read the reviews. When choosing a tool, it is important to consider not only performance, but also build quality. Then the product will be able to perform finishing for a long service life.