TOP 10 popular models of Nordberg nutrunners: overview, specifications, reviews
Content
- Overview of popular Nordberg nutrunner models
- Impact wrench Nordberg NP14085
- Impact wrench Nordberg NP14100
- Impact wrench Nordberg IT250
- Pneumatic wrench Nordberg NP18360
- Impact wrench Nordberg IT260
- Pneumatic wrench Nordberg NP14110
- Impact wrench Nordberg IT4250
- Impact wrench Nordberg NP14068
- Impact wrench Nordberg NP16130
- Impact wrench Nordberg NP18250
It is shaped like a drill. It is intended for maintenance of trucks, buses, and is also used in the construction industry. The 4250" square IT1 delivers a maximum torque of 3388 Nm at 4200 rpm, making it easy to mount or remove heavy wheels, tighten fasteners firmly and completely, or unwind knots.
The Nordberg impact wrench is designed for everyday use when working with fasteners. It is able to withstand high loads during operation in a car service or tire shops.
Overview of popular Nordberg nutrunner models
Most pneumatic tools look like either a gun with a handle and a barrel, or have an oblong drill shape. Using a hose, they are connected to the compressor and turned on by pressing the trigger button. The air pressure supplied to the units does not exceed 6,0-6,5 Bar.
Impact wrench Nordberg NP14085
This model easily unscrews wheel bolts of 17 or less without first breaking. To remove nuts by 21 and those that have not been unscrewed for 10 years or more, you need sufficient air supply to the tool. You will also need an oxygen hose from 9 mm and a compressor of 50 liters.
Nordberg NP14085
Pros Nordberg NP14085:
- small sizes (21x23x8 cm);
- durable composite materials of the body provide a small weight of the device (2,85 kg);
- comfortable rubber handle
- percussion mechanism "Twin Hammer";
- maximum force 850 Nm at 7000 rpm;
- the presence of a reverse;
- affordable price (6632 ₽) and low cost of the repair kit.
Cons:
- no set of heads included;
- there is no tightening torque adjustment.
When using the pneumatic nutrunner NP 14085 ECO Nordberg, one should not forget about the air filter and lubricator for lubrication. It is necessary to drip every hour 5-10 ml of machine oil into the inlet fitting. Under these conditions, the device will last much longer than the warranty period.
Impact wrench Nordberg NP14100
The tool is equipped with a square external chuck with a diameter of ½ inch. A torque of 1000 Nm is achieved at 6000 free revolutions per minute. Thanks to the built-in "double hammer" system, high power and balance of blows are ensured.
Nordberg NP14100
Advantages:
- soft grip and side air outlet for comfortable operation;
- low air consumption - 120 l / min;
- the movable nut protects the hose from twisting and kinks;
- the ability to adjust the effort - 3 speeds.
Reviews of the Nordberg NP14100 wrench are almost all positive. Basically, complaints are only about the weight of the structure (3,1 kg).
Impact wrench Nordberg IT250
The device looks stylish: it resembles a fantastic "blaster". It often goes on sale with additional cases for convenient storage:
- IT250 KIT with sockets (9-27mm), extension (125mm) and hex (4mm);
- IT250 KD with deep nozzles.
Nordberg IT250
The Nordberg IT250 a1 wrench is equipped with a ½" square with a friction ring for easy unscrewing of "stuck" bolts up to 24 mm in size. The force of the maximum torque of 881 Nm reaches at 7500 rpm. To avoid any interference during operation, the air is released away from the operator and the surface to be treated.
Pros:
- 3-step speed adjustment;
- Soft grip handle for comfortable grip
- overload-resistant pneumatic motor.
Cons:
- poor basic equipment (therefore, it is better to choose products with cases);
- significant air consumption - 133 l / min (the highest in the segment of mechanisms with such a cartridge).
The IT250 model is an indispensable assistant in the industries, construction and car service for installing and disassembling parts on threaded and nut connections.
Pneumatic wrench Nordberg NP18360
This unit is shaped like a long drill. It is used for mounting and removing wheel fasteners in trucks. The maximum force of 3600 Nm is possible at 3000 spindle revolutions per minute. The size of the connecting square 1″ is suitable only for large heads (from 36 to 80 mm).
Nordberg NP18360
Pros:
- a narrow long shaft in the front is optimal for working in hard-to-reach places;
- wide additional handle made of non-slip material guarantees a firm grip with both hands;
- 3-position power regulator for twisting / unscrewing;
- metal case with 3 rubber pads provides reliable protection of internal mechanisms from impacts.
Cons:
- the heaviest in its class cargo wrenches - 21,3 kg;
- large dimensions - length 73 cm;
- colossal consumption of compressed oxygen - 385 l / min;
- the high cost of the repair kit and the equipment itself - 27990 rubles.
Impact wrench Nordberg IT260
This ½" square model is an upgrade of the IT250 due to increased power, lighter weight and reduced air consumption. The torque force of 1058 Nm is achieved at 7500 rpm, which allows you to remove rusted bolts up to 33 mm.
Nordberg IT260
Features:
- double impact technology (Twin Hammer);
- reverse and speed change button;
- movable nut at the bottom of the handle protects the hose from twisting;
- resistance to explosion and fire due to work on compressed air;
- withstands overload with intensive use;
- low weight (2,1 kg) and compact dimensions of the device facilitate transportation.
The only downside is the packaging. In the box, except for the device, lubricators and instructions, there is nothing else. Additional heads must be purchased.
The device differs in reliability and simplicity of operation. It is suitable for self-mounting tires in the garage, road or at service stations.
Pneumatic wrench Nordberg NP14110
It looks like a pistol. Equipped with external square chuck. The maximum force of 1100 Nm occurs at 5200 spindle revolutions per minute. The ½ inch square connection is designed for sockets up to 33 mm.
Nordberg NP14110
Pros:
- convenient start key;
- mechanism "Twin Hammer";
- 3-stage power adjustment;
- the body is completely made of metal;
- low air consumption - 120 l/min.
Cons:
- no shockproof rubber pads;
- metal handle without the use of special gloves glides in the hand.
Impact wrench Nordberg IT4250
It is shaped like a drill. It is intended for maintenance of trucks, buses, and is also used in the construction industry. The 4250" square IT1 delivers a maximum torque of 3388 Nm at 4200 rpm, making it easy to mount or remove heavy wheels, tighten fasteners firmly and completely, or unwind knots.
Advantages:
- long working shaft (23 cm);
- two handles with a soft covering for comfortable work;
- 4 levels of torque adjustment;
- a large margin of safety of all mechanisms of the product;
- fully squeezed trigger with soft start.
Disadvantages:
- bulky dimensions (length 68,5 cm) and heavy weight (16 kg) make the product unsuitable for frequent transportation;
- significant compressed air consumption - 283 l / min;
- high price for a repair kit and equipment - 52550 rubles.
The model is designed for professional use in industry, tire shops and service stations.
Impact wrench Nordberg NP14068
The device with a 4-point external chuck is designed to accept sockets with a drive ½ inch.
Nordberg NP14068
Pros:
- durable case made of composite materials (to reduce weight);
- 5-stage force regulator;
- double hammer system;
- simplicity in operation;
- rubber grip and comfortable soft start button;
- affordable price - 5435 rubles.
Cons:
- low torque force - 680 Nm at 7000 rpm;
- If the nut is tightened too tightly, injury may result from kickback of the ratchet mechanism.
The NP14068 easily handles the installation and removal of fasteners up to 17mm in diameter. To unscrew the "stuck" bolts from 21mm, a sufficient supply of oxygen is required.
Impact wrench Nordberg NP16130
The inexpensive and powerful unit is characterized by high torque (1300 Nm) at 4800 rpm. The landing cartridge size is 3/4″.
Nordberg NP16130
Advantages:
- convenient push-button trigger;
- 3 speed adjustment positions;
- the metal case protects the internal mechanisms from impact;
- increased torque + Twin Hammer technology.
Disadvantages:
- large weight for use with 1 hand - 5,1 kg;
- high oxygen consumption - 196 l / min.
The NP16130 will be an indispensable assistant for car service masters for working with wheel bolts up to 70 mm in size.
Impact wrench Nordberg NP18250
The maximum tool force of 2500 Nm at 3200 spindle revolutions per minute, easily copes even with soured 8 cm units of trucks and buses:
Pros:
- a shaft with a narrow base and a length of 16 cm takes out fasteners in hard-to-reach places;
- convenient smooth inclusion;
- additional handle for comfortable and long work.
Nordberg NP18250
Cons:
- weight - 12,7 kg;
- long length - 66 cm;
- high oxygen consumption - 280 l / min;
- expensive repair kit.
The Nordberg NP18250 pneumatic wrench is ideal for tire fitting work both in the home garage and at service stations. It is designed for:
- tightening massive fasteners;
- mounting or removing large wheel bolts;
- elimination of rusty and ingrown threaded assemblies of vehicles.
This comparison table will help you choose and buy the Nordberg impact wrench correctly.
| Серия | Dimensions (mm):
| Weight, kg) | Max force (Nm) | Rpm | Air consumption l/min | Price (thousand ₽) | Landing square (inch) |
| NP14085 | 210h230h80 | 2,85 | 850 | 7000 | 119 | 6,632 | 1 / 2 " |
| NP14100 | 230h230h75 | 3,1 | 1100 | 6000 | 120 | 7,381 | |
| IT250 | 210h240h85 | 3,1 | 881 | 7500 | 133 | 9,642 | |
| IT260 | 220h240h85 | 2,1 | 1058 | 7500 | 130,3 | 11,176 | |
| NP14110 | 210h275h100 | 3,3 | 1100 | 5200 | 120 | 8,246 | |
| NP14068 | 215h225h80 | 3 | 680 | 7000 | 119 | 5,435 | |
| NP16130 | 235h280h95 | 5,1 | 1300 | 4800 | 196 | 13,431 | 3 / 4 " |
| NP18250 | 230h660h170 | 12,7 | 2500 | 3200 | 280 | 27,887 | 1" |
| NP18360 | 260h730h180 | 21,3 | 3600 | 3000 | 385 | 27,900 | |
| IT4250 | 290h685h175 | 16 | 3388 | 4200 | 283 | 52,550 |
